18 3/4 in barrel custom stock with high cheekpiece for cheek weld to scope alignment .enlarged lever handle, scope bases machined into the barrel, (these will never come loose LOL) open sight dovetails also machined into the barrel. the magazine tube has a ring lug silver soldered on to the tube and it rests against a stop machined on the barrel. this has the sling attach on the side instead on the bottom. the butt pad is a soft super cell. the scope is Burris scout 2.75 power with 8 to 14 inch eye relief. my 44 mag brass has all been modified to use large rifle primers to handle rifle pressures. 44 mag is a pistol cartridge and the large pistol primers are made with thinner material and not handle rifle pressures. Sinclare has a carbide primer pocket cleaner that i used to ream the brass primer pockets 6 thou deeper for the large rifle primers. now for the rest of the story. with H110 powder with a compressed powder charge, 240 grain bullet clocks at 2200 fps. this is in the 444marlin velocity range with a lot less recoil. new price $2000