Browning Hells Canyon Speed ovix camo x-bolt scope bases and 2 boxes hornady match 225 grain ammo, only 8 to 10 rounds fired no scratches or marks basically brand new, price is firm must have valid pal, pick up red deer but willing to meet if close enough

categories:GunsSporting Goods

1092 impressions

126 views

Like brand new, mounted once and had 60 rounds through on bench. Never been in field. Not a scratch. $780 new with $45 throw lever. Price with GST is $866 in Alberta and these never seem to go in sale. $725 plus shipping on buyer or meet up around Red Deer. All parts and documents included. https://rdsc.ca/optics-mounts/primary-arms-optics/slx-riflescopes/primary-arms-slx-1-8x24-ffp-rifle-scope-acss-raptor-illuminated-reticle-moa.html

categories:GunsSporting Goods

651 impressions

25 views

Like brand new, mounted once and had 60 rounds through in bench. Not a scratch. ACSS BDC reticle for 7.62x39 and 300 Blackout. Everything that was in the box is here, screws are perfect. New price is $500 plus GST at $525 in Alberta and these are never on sale. $400 plus shipping on buyer or local pickup near Red Deer. https://rdsc.ca/optics-mounts/primary-arms-optics/slx-red-dot-sights/primary-arms-slx-3x-microprism-scope-acss-raptor-7-62x39-300-blk-red-illuminated-reticle-moa.html

categories:GunsSporting Goods

561 impressions

30 views

  Now that I'm in my late 70's , I am downsizing my antique gun and militaria collection to move into a much smaller house with a much smaller gunroom.......offering an original 1880's Mills pattern , woven ammo belt with a rare 1881 Patent Mills/Orndorff brass buckle and retainer. The loops hold .40 to .45 caliber rounds and included are twenty .44-90 Sharps bottleneck cartridges. Please view the photos closely as the belt has been well used and has some damaged loops and earlier field repairs.....I have always refrained from doing any repairs or "enhancements" to my original antiques as the wear and tear is a natural part of its history and character. The cartridges are not original but are repro brass which was purchased about 45 years ago and which I loaded with black powder and some very old primers which were purchased about 50 years ago ( used for display purposes only ). The belt and attached buckle were purchased by me in 1967 at an Ohio gun show. The brass buckle has that beautiful patina which only time can create and it does have a few dents from honest wear and tear.....contact me if you interested and need more photos, or different angles, as the website only allows 10 photos. This is a rarely encountered ensemble.    I am willing to ship at "BUYER'S EXPENSE" but it will need to be by a trackable and insured method, or I offer local pick up --- OF COURSE I CANNOT SHIP THE BLACK POWDER CARTRIDGES WITHOUT REMOVING THE POWDER AS THEY ARE CLASSED AS EXPLOSIVES.......THIS COULD BE POSSIBLE AS I HAVE NEVER CRIMPED MY SHARPS CARTRIDGE RELOADS WITH PAPER PATCHED BULLETS. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.               *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

342 impressions

17 views

New and never used....base  length 1  1/16" x  3/8 " wide.    I am willing to ship at "BUYER'S EXPENSE" ( as long as Canada Post is working  ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.               *** PLEASE NOTE *** I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

737 impressions

23 views

Would also sell them separately.....Left one NEW $ 12.00 and Right one Used  $ 8.00 (see photo) .    I am willing to ship at "BUYER'S EXPENSE" ( as long as Canada Post is working  ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.               *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

679 impressions

22 views

***SOLD PENDING PAYMENT***Original, antique 1882 BUFFINGTON HEADLESS SHELL EXTRACTOR for 45-70 caliber Springfield rifles and carbines ( Custer could have used these at the Little Bighorn )...... last one left.   I am willing to ship at "BUYER'S EXPENSE" ( as long as Canada Post is still working on a rotating basis ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.               *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

810 impressions

38 views

Ten point HCA-095 Evo-X scope. Never mounted comes with everything you see, just don’t need at the moment 275obo located in Red Deer

categories:GunsSporting Goods

5713 impressions

332 views

Ruger AmericRuger American Ranch Rifle, 16.12 Cold Hammer Forge Barrel, 5.56 NATO [36928]​ Details Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user adjustable between 3 and 5 pounds, allowing shooters to make that perfect shot. Ergonomic, lightweight synthetic stock designed for quick, easy handling blends a classic look with modern forend contouring and grip serrations. Soft rubber buttpad is crafted for maximum recoil reduction. The one-piece, three-lug bolt with 70° throw provides ample scope clearance and utilizes a full diameter bolt body and dual cocking cams for smooth, easy cycling from the shoulder. Patented Power Bedding®, integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy. Factory-installed, one-piece Picatinny scope base. Offers minute-of-angle accuracy that can make every hunt a success. Compact, threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity. The visible, accessible and easy-to-actuatetang safetyprovides instant security. Also includes: one magazine; sling swivel studs. SPECS​ StockFlat Dark Earth Synthetic FeatureStandard SightsNone - Scope Rail Installed Barrel Length16.12" MaterialAlloy Steel Capacity10 MagazineAR-Style Twist1:8" RH FinishMatte Black Weight6.1lb. Thread Pattern1/2"-28 Overall Length36" Length of Pull13.75" Grooves5 Bought new from RDSC. Maybe 15 round through it, excellent condition. Topped with a VX-1 3-9 x 40 and Talley scope rings I am in Red Deer if you want to get some hands on before purchasing. I am always interested in tradesan Ranch Rifle, 16.12 Cold Hammer Forge Barrel, 5.56 NATO [36928]​

categories:GunsSporting Goods

11249 impressions

1064 views

Custom built metal stand to hold presses, powder measures, etc. It can be bolted or clamped to a bench or table to bring your equipment to a comfortable working height. The tubular steel is 5 inches in diameter with a 7 inch diameter base and overall height of 10 inches which has been powder coated in black. The weight is 4 lbs. 12 oz. PLEASE NOTE - the sale is for the STAND ONLY and the press is NOT INCLUDED. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.     *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

30362 impressions

1500 views

Offering an "almost new" ( only used 4 times ) .44 mag / spl resizing die with ring spacer.....please note this is a steel and NOT carbide. Years ago when I hit age 75 , case lubing suddenly became a chore so I purchased individual carbide resizing dies for all my die sets and just recently found this one in my junk box ......a good deal for someone in need of a good die in "like new" condition. I am willing to ship at "BUYER'S EXPENSE" , or offer local pick up. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.     *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

9144 impressions

274 views

16 oz. reloading room/range accessory, which keeps your coffee hot or " other beverage " cold while you are reloading or at the range ..... bought a few of these at a gun show in Denver in the year 2000 but this one was never used, so is in excellent condition. If you have your own pictures, you can unscrew the bottom, remove the photo sheet as a template and replace it with your own pictures. I'm not sure who made it, but the bottom is marked patent pending and matches some of my early Starbucks bottoms that were ( and still are ) all made in China----BOTTOM MARKED " do not microwave" and " hand wash only" also like the Starbucks tumblers and in the same script. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.     *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

23929 impressions

658 views

At a bargain price.....one new , unopened pack of 3 bronze bore brushes in .25 caliber which I no longer need as I no longer have my 25-20 Winchester. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.     *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

15699 impressions

435 views

Previous sale cancelled due to non payment.....Still 0ffering straight sided, paper patched ( .4035 to .4045 ) medium hardness 8/9 which were very accurate in my original 40-70 and 40-50 sharps rifles. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.    *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

12598 impressions

633 views

Offering 7 various shell holders for $45.00 . These are for calibers which I no longer reload and some of them were rarely used.....I have listed them by make and number and the caliber for which " I used them " , but most will also be usable and  are listed in the charts for dozens of other calibers:  RCBS # 22 for .43 MAUSER  ,  LYMAN # 3 for 7.62x39  ,  LYMAN # 13 for 300 WEATHERBY MAG  ,  LYMAN # 19 for .30 CARBINE  ,  LYMAN # 15 for 8MM MAUSER  ,  RCBS # 17 for .32 ACP  ,  Unmarked ( Hornady or Redding ? )# 9 which was for 38 & 44-40 WIN. Please consult an online, or your own,  Shell Holder Cross Reference Chart to satisfy yourself and verify, what cartridge they will fit.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.      *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

8726 impressions

209 views

DEPRIMED AND TUMBLED - About 20 or so were fired twice while developing a load.......offered for sale ( case-gards included ) as I no longer shoot 9mm.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.  *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

3517 impressions

122 views

Offered for sale as I am l no longer reloading 9mm.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.  *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

3830 impressions

180 views

NEVER USED...... received as a Christmas gift many years ago ( very much appreciated ) but never used , as it was never part of my BP cartridge shooting regimen, which always worked just fine as it was. Note the rubber sealing ring.....good Buffalo Arms quality item.....total length approx. 19 1/4 inches. I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ) , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.    *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

13125 impressions

532 views

OFFERING A VINTAGE ( circa 1900 ), UNION METALLIC CARTRIDGE COMPANY ADVERTISING TARGET......measures 5 1/2" x 4 1/4"..... EXCELLENT CONDITION !!! I am willing to ship at buyer’s expense by letter mail, , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there or enroute for delivery.     *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

21131 impressions

714 views

 Just found some shell holders,  in the back of the bottom drawer of my loading bench, for a Lee Hand Primer ( which I haven't had for over 30 years ), and which are no longer useful to me for reloading. There are only these six shell holders remaining ..... #s 1,3,4,12,14 & 18 complete with plastic case which has room for 6 more.   I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

5578 impressions

171 views

I received this in my Christmas stocking last year ( for a gopher shooting accessory ) but never was able to use it,  having sold my gopher rifle the month before......a good deal for someone who shoots .223 or a similar rifle.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.       *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

6306 impressions

141 views