Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2951 impressions

493 views

Brand new Pump action Mag fed Non restricted Caliber: 12 gauge Chamber: 2.75" Barrel:  18.5"  Capacity: 10+1 Sights: Bead Front  Choke: Cylinder Bore Stock: Synthetic  Overall Length: 39.5"  Pull Length: 13.87" Weight: 7.75 lbs  Coming with: One 10 Rounds Magazine Cable lock Made in USA

categories:Sporting GoodsGuns

6311 impressions

398 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

5595 impressions

438 views

Brand new Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits LMG and M models. Does not fit SA, SE and SR. Includes installation instructions, hex keys and spare set of hardware.

categories:Sporting GoodsGuns

3232 impressions

524 views

Brand new Over/Under Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 2 Barrel Length: 30" Barrel Finish: Blued Adjustable trigger Microcore® recoil pad Opening lever with black rubber overmoulding for better grip B-Fast® stock Wide receiver improves stability and balance Steelium® Plus barrels Optimachoke® HP chokes Weight: 5.5 kg Made in Italy

categories:Sporting GoodsGuns

14938 impressions

1163 views

Brand new 3-9x40mm 1 inch Tube Second Focal Plane Length x Width x Height: 12.4 in x 1.9 in x 1.9 in Day Reticle Color: Amber Illumination Source: Fiber Optics & Tritium Bullet Drop Compensating (BDC): No Bindon Aiming Concept™ (BAC): No Adjustment: 1/4 MOA Per Click Eye Relief: 2.2 in. - 3.8 in. (55.88mm - 96.52mm) Field of View (degrees): 6.45° - 2.15° Finish: Matte Black Weight: 13.4 oz. (379.88g) Reticle Pattern: Standard Duplex Crosshair Night Reticle Color: Amber Power Source: Fiber Optics & Tritium Exit Pupil: 0.52 in. - 0.17 in. (13.21mm - 4.32mm) Adjustment Range: 50 MOA Total Travel Field of View (feet): 33.8 ft. - 11.3 ft. @ 100 yds. (11.27 - 3.77m @ 100m) Housing Material: 6061-T6 Aluminum, black hard coat anodized Submersion Depth: 10 ft. (3m) Coming with: Trijicon Logo Sticker (PR15) LENSPEN® (TA56) Set of Lenscaps AccuPoint Manual Warranty Card

categories:Sporting GoodsGuns

4292 impressions

677 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

8597 impressions

609 views

Brand new 3-9x40mm 1 inch Tube Second Focal Plane Length x Width x Height: 12.3 in x 2.5 in x 2.2 in Weight: 17.02 oz. (482.51g) Reticle Pattern: MIL-Square Crosshair Day Reticle Color: Green Illumination Source: LED Illumination Settings: 11 Power Source: 1 CR2032 Battery Life: 198 hours Adjustment: 0.1 MIL per click Adjustment Range: 12 MIL Total Travel Eye Relief: 3.5 in. - 3.7 in. (88.9mm - 93.98mm) Exit Pupil: 0.52 in. - 0.17 in. (13.21mm - 4.32mm) Field of View (degrees): 6.75° - 2.25° Field of View (feet): 35.5 ft. - 11.8 ft. @ 100 yds. (11.83 - 3.93m @ 100m) Housing Material: 6061 Aircraft Grade Aluminum Finish: Matte Black Coming with: Bikini Caps Scopecoat™ 1 CR2032 Battery Quick Reference Guide Warranty Card Vinyl Logo Sticker

categories:Sporting GoodsGuns

5038 impressions

623 views

Brand new Caliber: .32 ACP Capacity: 5/20 Rounds Material: Metal

categories:Sporting GoodsGuns

1490 impressions

368 views

Brand new Manufacturer: Pro Mag Fits:  Metric Pattern FN FAL and Variants Note: It does not work with Kel-Tec RFB Caliber: 308WIN/7.62x51 Capacity: 5/20 Rounds Material: Steel and Polymer Made in USA

categories:Sporting GoodsGuns

4358 impressions

623 views

Brand new Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits SA and SE models. Does not fit LMG and SR. Includes installation instructions, hex keys and spare set of hardware.

categories:Sporting GoodsGuns

3892 impressions

566 views

Brand new Lifetime Warranty Color: Black Finish: Type III Hard Coat Anodized Fabric/Material:6061-T6 Aluminum Magnification:1 x Objective Lens Diameter:23 mm Reticle:2 MOA Dot Illumination Type: LED Illumination Color: Red Brightness Settings:6 Eye Relief: Unlimited Adjustment Type: MOA Adjustment Click Value:1 MOA Parallax:50 yds Lens Material: HD Glass Optical Coating: Fully Multi-Coated Light Transmission:99.5 % Attachment/Mount Type: Picatinny Battery Type:CR2032 Battery Quantity:1 Battery Life:40000 hours Water Resistance Level: Waterproof Shockproof: Yes Fogproof: Yes Length:2.48 in Width:4.6 in Height:3.5 in Weight:3.5 oz Included Accessories: Flush mount Magnification Type: Fixed Adjustment Range:120 MOA Assembled in EP-Level Clean Room 100% Waterproof, Fog proof and Shockproof (tested up to 1200 Gs) Aircraft Grade Aluminum with Rugged Design Ready for the Toughest Environments Full Wide Band Low Light Enhancement Six Levels of Red Illumination, Featuring On/Off Between Each Level

categories:Sporting GoodsGuns

2753 impressions

496 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11810 impressions

472 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11197 impressions

393 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10259 impressions

392 views

Brand new The Bushnell AR Optics Rush is a hi-rise mount with built-in laser sight for close quarter environments. The integrated, offset laser saves space on the rifle, and projects a continuous, powerful red beam with one push of a button. It replaces your existing mount, and is compatible with any optic that can be mounted on a picatinny rail. Offset laser Easy battery replacement One-button operation Waterproof Color: Black Battery Type: CR2 Batteries Included: Yes Laser Color: Red Output: <5mW

categories:Sporting GoodsGuns

1498 impressions

336 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:Sporting GoodsGuns

9944 impressions

570 views

Brand new The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts feature two separate side clamps and allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount. 10-degree wedge included 0 MIL/0 MOA Height: 38 mm/1.5” Clearance: 7 mm/.27" (from the bottom of the tube to front of bridge of the mount body) Length: 141 mm/5.55” Weight: 154 g/5.4 oz Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

7166 impressions

422 views

Brand new Manufacturer: Pro Mag Fits:  Glock 17 Caliber: 9mm Capacity: 10 Rounds Material: Steel and Polymer Made in USA

categories:Sporting GoodsGuns

6215 impressions

485 views

Brand new The KRISS Vector Ambidextrous Folding Stock Adapter for GEN II 2017 is constructed of hard coat anodized aluminum and steel and allows for the attachment of AR-15 type buffer or pistol arm brace tubes. The adaptor can be configured to fold to either the left or right side with only a few tools in a matter of moments. This part is only compatible with the Gen 2.1 (Gen 2-2017) Vector which does not have the original hinge mount. This part is incompatible with the Gen 1 and Gen 2 (hinged) Vector. One end of the adapter attaches directly into the Gen 2.1 Vector's upper housing. The other end features threading that will accept an AR buffer tube or pistol tube. SKU: KVA-FSABL00

categories:Sporting GoodsGuns

3106 impressions

420 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10938 impressions

465 views