Winchester 52 - 69 - 75 - 10 Shot Magazine - Wisner 2 Available $135.00 each --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

4791 impressions

141 views

Lyman 1A - DA Tang Sight with Mounting Screws Winchester 1892 + 1894 Rifles Excellent 95-98% Original Condition $475.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

5669 impressions

159 views

1) Winchester Post 64 M94 - Rear Sporting Leaf Sight w/ Elevator - $170.00 2) Winchester Post 64 M94 - Elevator for Rear Sight - $50.00 3) Winchester Post 64 M94 - Front Sight Silver Beaded Insert - 80.00 4) Winchester Post 64 M94 - Front Sight Hood - $40.00 5) 6) Winchester Post 64 M94 - Finger Lever Pin Stop Screw - $40.00 7) Winchester Post 64 M94 - Link Pin Stop screw - $35.00 10) Winchester Post 64 M94 SRC Front Band Screw - 40.00 11) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 12) 6-48 Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

70283 impressions

2732 views

If this ad is still up, then item is available! For Sale - 1894 Winchester rifle in 38-55 cal. with round 26” barrel. Started out at $1200 Now $950 (as of Dec 15th) According to the serial number 161XXX, it puts the date of manufacturing to 1902, crescent butt plate, semi-buckhorn rear sight, all original except rear sight elevator is a replacement. Round 26" barrel, dark bore, good rifling, approx. 20% plum finish remains with lacquering on some of the metal. Dark walnut forend & stock (original) with the stock having a small piece missing from the left side and about a 1.25" old crack on the wood right side both near the bottom of the tang/guard (pictures are attached) but stock is still mounted solid to the tang. Action is still quite tight for it's age and old sling swivels had been added to the rifle at some point in it's younger years. Must have valid PAL to purchase and will be verified. EMT (shipped) or cash(pickup) - Shipping and/or insurance available at buyers expense thru Canada Post or a courier. Rear stock can be removed for transport. No trades or offers

categories:GunsSporting Goods

10992 impressions

724 views

Like new , used sparingly. Would also trade for .30 cal bullets, not live ammo in the 150 to 180 gr range. Text to 780 978 0172

categories:GunsSporting Goods

13183 impressions

465 views

Hand Stop and 3 pt Sling Swivels - Winchester Marksman Target Rifle - Models 52 - 70 - 75 Excellent Condition $100.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

50490 impressions

856 views

Unfired, BNIB Browning BLR takedown rifle in 6.5 Creedmoor. It features a 20-inch stainless steel barrel, a laminated gray hardwood stock, a 4-round detachable magazine, and weighs approximately 6.8 pounds. Its unique takedown mechanism allows quick barrel removal without affecting accuracy. Not considering trades, the price is non-negotiable, and PAL verification is required. Prefer FTF sale in Edmonton but can ship at buyer’s cost.

categories:GunsSporting Goods

59449 impressions

2742 views

For sale is an unfired, brand-new Chiappa 1886 Ridge Runner Takedown lever-action rifle chambered in .45-70 Government. This rifle features an 18.5" blued barrel, a durable rubber-coated stock, and a takedown design for easy transportation and storage. It includes Skinner express-style rear sights and fiber-optic front sights for rapid target acquisition. I am not interested in trades, and the price is firm. A valid PAL is essential and will be verified to obtain a transfer number.

categories:GunsSporting Goods

60650 impressions

2045 views

For sale is a rare LH eject Browning Bar semi autoin brand new condition 300 Win Mag.Engraved reciever and beautiful walnut stock.These rifles aren't made anymore and are hard to find. Scope not included talley 30mm rings are.

categories:GunsSporting Goods

2461 impressions

162 views

Savage 93 in 17hmr with a basic 3-9 weaver scope. Synthetic stock Comes with a 5 round and 10 round magazine and 450 rounds. Shoots great i just don't use it No rust just regular wear and tear Must have PAL don't waste my time if you don't have one Text or messaging on here is best

categories:GunsSporting Goods

1947 impressions

159 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

12603 impressions

419 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12398 impressions

436 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

10546 impressions

274 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

10842 impressions

236 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

11615 impressions

667 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19904 impressions

731 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:GunsSporting Goods

53886 impressions

1311 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

16029 impressions

958 views

Red Dot mount for Win 94 lever gun. This is the cleanest and easiest way to add a red dot to your rifle. If you have the AE version use two bolts to secure via the front scope mount holes. If not, any competent gunsmith can drill/ tap two  holes easily.  fits RMR footprint,  (2) available,  $100 shipped.  *please see my other ads*  

categories:GunsSporting Goods

8006 impressions

201 views

If this ad is still up then item is available For Sale -  Lee Precision 45-70 Govt full length steel reloading 3-die set - complete set (no crimp die included) $85 firm 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant If you want a crimp die also, contact me as one is available for sale... EMT (shipped) or cash(F2F pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense. Small package/tracked, all provinces - $22 (small box) via Canada Post Text or email only / unable to answer calls in remote areas No trades or offers

categories:GunsSporting Goods

4720 impressions

152 views

  For Sale - one Lee Precision 270 Winchester full length steel sizing dies - complete set (w/ crimp die) $80 – firm   1 set available Brand new in box - new manufacture -full length sizing die -crimp die included -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant   EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada. Small package/tracked: All provinces - $22 No trades or offers   If this ad is up then item is still available.

categories:GunsSporting Goods

5271 impressions

155 views