SOLD. $800 Not sure of the year but guessing from The 70’s. Real low round count for the age. Sounds like it sat in a safe for over 30 years with a good coat of oil. Excellent condition. Only thing I’ve changed on it was the butt pad. The original was rock hard. Put a rubber butt pad that absorbs some recoil. Scope is nothing special. Red Ram 4x32. It was still zeroed for 200 when I took it to the range though. If I was keeping it, think that’s the only thing I’d change but this would be a perfect starter hunting rifle as is. .308 win still reasonable $ and will put down most big game if you know how to shoot. Have seen some other PH listed on here before that are not in nearly this condition for $700. This one is like new. Asking $800. Text is the best way to reach me. I can’t always take a call. Prefer local sale. Calgary and Area. Verification of PAL req.

categories:Sporting GoodsGuns

7004 impressions

828 views

Up for sale is a fully functional Bliss & Goodyear “Protector” revolver in mint condition, manufactured in Norwich, Connecticut, circa late 1870s–1880s. Chambered in .32 Rimfire. This 5-shot single-action spur trigger revolver is in perfect condition, a rare find for a piece nearly 150 years old. Original antique – not a reproduction Excellent nickel finish and clean grips Cylinder locks up properly, timing and mechanics perfect Collector-grade condition, highly desirable example This is an outstanding revolver for any serious antique firearms collector. Given its rarity and excellent preserved state, it is priced at $880 Priced to sell $880 (Can ship - $30 Flat Rate) *NO PAL REQUIRED

categories:Sporting GoodsGuns

5145 impressions

548 views

Sold my pistol before the ban and didnt buy a new one in time, out of luck now. My loss is your gain, this stuff has just been sitting in ammo cans. $30 per box/individual bag of .40 (regular 45$+gst) $15 for the half boxes $20 per box for 9mm (regular 30+gst) (400rounds of 9mm) for $150 all in (600rounds of .40) for $350 all in

categories:Sporting GoodsGuns

1556 impressions

550 views

Ruger American compact .308 Leupold scope. The scope is a vx-3hd 3.5-10X with the CDS system. Scope and rings and base included. Only 30 rounds fired, 18” barrel Would be open to a trade for a .223

categories:Sporting GoodsGuns

9433 impressions

1110 views

FOR SALE Browning BLR .270 WSM Lever-action rifle in excellent condition. Smooth action, lightweight, and accurate. Ideal for any big game. Around 30 rounds have passed through it. Scope is not included but I’d be willing to to sell it for a fair price. I’m selling it because I don’t use it. It’s a beautiful gun and hard to find, so I will only entertain serious offers. Please let me know if you have any questions.

categories:Sporting GoodsGuns

15467 impressions

1414 views

Pre Ruger, Marlin 336 .30-30 2014 special edition. Engraved, gold inlay cowboy, gold trigger.

categories:Sporting GoodsGuns

6141 impressions

743 views

🔭 Scope Details: Model: Vortex Crossfire II 3-9x40 (V-Plex Reticle) Condition: Installed less than a year ago, purchased from The Shooting Centre on October 28, 2024. Features: Magnification: 3-9x Objective Lens Diameter: 40 mm Tube Size: 1 inch Field of View (at 100 yards): 34.1 - 12.6 ft Parallax Setting: 100 yards Fully multi-coated lenses for excellent light transmission Waterproof, fogproof, and shockproof Fast focus eyepiece Lifetime Vortex VIP Warranty 🔩 Ring Details: Model: Vortex Optics Pro Series Rings (1" Low, 0.75" / 19 mm) Condition: Excellent, installed with the scope, includes original screws and Torx key Material: 7075-T6 aircraft-grade aluminum Mount Type: Compatible with Weaver and Picatinny rails Made in the USA Torque Specs: Base: 30 in/lbs Ring screws: 18 in/lbs 💰 Price: Complete Set: $368 CAD Scope Only: $249 CAD Rings Only: $119 CAD 📍 Location: Calgary, Alberta Local pickup preferred, but shipping within Canada is possible at buyer's expense.

categories:Sporting GoodsGuns

3411 impressions

611 views

All primers are brand new and stored properly / shipping available - normally around $25 per shipment... CCI: #200 Large rifle, 1000 primers - $250 #250 Large rifle magnum, 1000 primers - $300 Winchester: Large pistol primers, 1000 primers - $200 Small pistol primers, 1000 - $200 Remington: No. 9 1/2 Large rifle primers, 100 - $30 No. 9 1/2 M Large rifle Magnum, 1000 -$275 Percussion caps No.11 tin of 100ct - SOLD OUT Federal: #155 Large pistol magnum, 1000 - $225 No trades or offers on primers or caps / only what's available above! Brand new in “unopened” package / tin EMT (shipped) or cash (pickup) Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only. PAL info req for primers, not caps More pictures coming..

categories:Sporting GoodsGuns

11989 impressions

973 views

Selling 30 rounds of shot-once 175gr ABLR 28 Nosler brass.

categories:Sporting GoodsGuns

2622 impressions

271 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

8598 impressions

609 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11814 impressions

474 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10942 impressions

466 views

Brand new The prohibition of high-capacity Ruger 10/22 magazines has been a failure of legislation in Canada. However, using a High-Capacity Remington 597 magazine in a Ruger 10/22 is perfectly legal. SBI has developed a magazine adapter to do just this. The adapter has been approved by the RCMP and is 100% legal to use. The adapter is made in Canada. Magazine Notice: We advise against using the black 30 round Remington 597 magazines. These magazines have a design defect which causes the follower to bind. ProMag Remington 597 magazines work best. You should also follow the posted magazine break in procedure. RUGER SR-22 NOTICE: The stock on the Ruger SR-22 rifle will interfere with the adapter. You will need to modify your stock for the adapter to work.

categories:Sporting GoodsGuns

10494 impressions

874 views

Lightfield has calibrated its wildlife control line into the following basic classes: Close range 8-25 yards, Mid-range 15-40 yards and Extended range 30+ yard. This is the ‘traditional’ aversive conditioning round, improved to carry a larger payload. This load is designed for close to intermediate encounters with large game such as Bear, Moose, Elk or Deer. The four pellets spread into a large pattern to impart a painful stimuli over a large area with little risk of injury. Gauge: 410 Shot Type: Rubber Buckshot 4 Pellets Shell Size: 2.5” Velocity: 1400 FPS Per box of 5 rounds  Made in USA

categories:Sporting GoodsGuns

3466 impressions

517 views

For sale are: Five Magpul AK-47 magazines Individual magazines are $32 These work well in the wk181c and m10x These magazines are pinned by rivet (not crimped or welded) to reduce their capacity to 5 rounds (from the original 30) to comply with Canadian law. Shipping available at actual cost or pick up in SE Edmonton. Please click on my user name to learn more about my business, see my other ads, trades or shipping policies. The section of C-21 that requires a PAL to purchase magazines has come into force. I don't need to run your PAL through the government website (like a firearms purchase) but I need to at least see it. This is the last import of this magazine type WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

15070 impressions

1556 views

AR style double mag carriers in green. All brand new and unused. Reliable and get the job down. $30 each (24 avaliable) Shipping on buyer or pick up near cabelas calgary.

categories:Sporting GoodsGuns

4996 impressions

824 views

$40 shipped to all majors $30 PICK UP LOCAL DEAL! Genuine milsurp Chinese rifle sling with characters. Those were used on type 56 SMG, type 56 carbine, type 63s and type 81's. Another variant, the two leather tabbed available as well!

categories:Sporting GoodsGuns

26422 impressions

1824 views

$40 SHIPPED! $30 PICK UP LOCAL DEAL! Those were used by the Chinese on type 81, the type 56 SMG and type 56 carbine

categories:Sporting GoodsGuns

16412 impressions

1757 views

Type: Air Rifle / Machine Gun. Distributer: Umarex Model: Legends M1A1. Materials: Mostly Metal build. Weight: 7.75 pounds (3.5 kilograms) Barrel: 12 inches – smooth bore steel. Propulsion: 2×12 gram CO2. Action: Internal BoltBlowback single action. Ammunition Type: 4.5mm Steel BB’s. Ammunition Capacity: 30 round full size drop out magazine. Max FPS: 435.

categories:Guns

17444 impressions

1635 views

40 338 210gr ttsx $40(Sold) 50 338 250gr Nolser Partitions $90(Sold) 40 338 225gr Interlock $30 20 308 165gr tsx $15(Sold) 50 307 178gr ELDX $30 100 277 140gr Interlock $70 Cash only. No trades. Local sale Red Deer and surrounding area.

categories:Sporting GoodsGuns

7766 impressions

897 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:Sporting GoodsGuns

10214 impressions

1104 views