Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8735 impressions

603 views

Scope Weight:20.4 oz Scope Length:10.5 inches Magnification Range:1x – 10x Scope Objective Diameter:28mm Scope Tube Size / Mount:34mm Turret Adjustment (Click Value):0.5 MOA Elevation Turret Details: Capped 0.5 MOA per click Windage Turret Details: Capped 0.5 MOA per click Reticle Position: Second focal plane Reticle Details:MSR-BDC10 reticle Eye Relief:3.22-3.54 inches Illuminated Reticle:Yes – 11 levels Package Includes: Battery Allen wrench Manual Lens cloth Alpha-MSR cantilevered scope mount Scope Finish: Black Scope Turret Rotation: Counter Clockwise (CCW) Designed by Sig Sauer Assembled in China

categories:Sporting GoodsGuns

7834 impressions

640 views

Brand new The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15 / M4 pistol grip. The ergonomic, hand-filling design combines anti-slip texturing with storage core capability. With a similar shape to a ‘medium’ sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included. Positive Anti-Slip Texture Beavertail Backstrap For Enhanced Ergonomics Storage Core Capability Hard Polymer Bottom Made in USA

categories:Sporting GoodsGuns

2574 impressions

391 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:Sporting GoodsGuns

5918 impressions

489 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Remington 870 series shotguns, adding modularity, comfort, and customizability to the 870 platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. The MOE M-LOK Forend is not compatible with the Remington 870 Super Mag.

categories:Sporting GoodsGuns

5749 impressions

476 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

6578 impressions

590 views

Brand new Shell carrier for the 12 gauge Remington 870 shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:Sporting GoodsGuns

8756 impressions

482 views

Brand new Lifetime Warranty Color: Black Finish: Type III Hard Coat Anodized Fabric/Material:6061-T6 Aluminum Magnification:1 x Objective Lens Diameter:23 mm Reticle:2 MOA Dot Illumination Type: LED Illumination Color: Red Brightness Settings:6 Eye Relief: Unlimited Adjustment Type: MOA Adjustment Click Value:1 MOA Parallax:50 yds Lens Material: HD Glass Optical Coating: Fully Multi-Coated Light Transmission:99.5 % Attachment/Mount Type: Picatinny Battery Type:CR2032 Battery Quantity:1 Battery Life:40000 hours Water Resistance Level: Waterproof Shockproof: Yes Fogproof: Yes Length:2.48 in Width:4.6 in Height:3.5 in Weight:3.5 oz Included Accessories: Flush mount Magnification Type: Fixed Adjustment Range:120 MOA Assembled in EP-Level Clean Room 100% Waterproof, Fog proof and Shockproof (tested up to 1200 Gs) Aircraft Grade Aluminum with Rugged Design Ready for the Toughest Environments Full Wide Band Low Light Enhancement Six Levels of Red Illumination, Featuring On/Off Between Each Level

categories:Sporting GoodsGuns

2867 impressions

527 views

Brand new The KRISS Vector Ambidextrous Folding Stock Adapter for GEN II 2017 is constructed of hard coat anodized aluminum and steel and allows for the attachment of AR-15 type buffer or pistol arm brace tubes. The adaptor can be configured to fold to either the left or right side with only a few tools in a matter of moments. This part is only compatible with the Gen 2.1 (Gen 2-2017) Vector which does not have the original hinge mount. This part is incompatible with the Gen 1 and Gen 2 (hinged) Vector. One end of the adapter attaches directly into the Gen 2.1 Vector's upper housing. The other end features threading that will accept an AR buffer tube or pistol tube. SKU: KVA-FSABL00

categories:Sporting GoodsGuns

3449 impressions

461 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

9206 impressions

663 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

6057 impressions

477 views

Blaser R8 Ultimate NEW, complete rifle with scopes set. Adjustable cheek comb and recoil absorption pad. Semi weight fluted barrel, 308 win IC control bolt housing Blaser 2.8-20x50 ic scope Blaser RD20 red dot Blaser Zeiss QD saddle mount Blaser sling Blaser Type C hard case Everything brand new, hard case used for storage. A very high quality rifle, that is very adjustable, extremely well balanced and very accurate. Complete set, that is good for use in the bush or long (for the caliber) range. All original boxes available. Price is firm + shipping. Not interested in trades, sorry.

categories:Sporting GoodsGuns

37509 impressions

1758 views

Mint Condition, Built Savage 110BA 338 Lapua Magnum, Military Sniper,Anti-Material Rifle with Blue Diamond Huskama Scope with Custom Laser cut turrets to match the Ammo for 285 grain and 250 grain. Over-sized Jumbo Bolt with Custom Blue powder-coating. Complete with mounted telescoping 13" to 36" Bi Pod. It is a .416 necked down to .338 caliber. Comes with 4 1/2 box's of ammo and also a new carbine fiber cleaning rod. Also comes with a Custom made double locking aluminum case. This is a 1 Mile and beyond rifle. Serious inquiries Only

categories:Sporting GoodsGuns

12163 impressions

1092 views

Blaser R93 in a WSM 300 with quick detach mounts and a Zeiss scope, also has a muzzle break installed

categories:Sporting GoodsGuns

6525 impressions

912 views

Custom 7mm comes with vortex HST 6-24x50 scope Standard rem 700 action with a aftermarket extractor, benchmarks m5 barrel 1:8 twist 24” long. Has two detachable magazines, magazines hold 3. Has 20moa rail Has long mount scope rings Gun shoots amazing, and has been kept in great shape

categories:Sporting GoodsGuns

6551 impressions

619 views

Brand new Designed for modern semi-automatic pistols, MSR platforms and shotguns, the Romeo4T-Pro 1x20mm is for short and medium range engagements and recreational shooting across a wide range of calibers and light conditions. Tactical battery-powered red dot sight Designed, built and tested for hard, professional use 9 daytime settings, 3 NV settings Engineered lens coatings for elite performance in bright light or NV Top mounted activation with NV Override control Waterproof Durable half-inch hex mount 3 mounting heights come standard in the box Clear flip-backs, opaque front flip back, and ARD Kill-Flash included 50,000 hour runtime with CR2032 battery and MOTAC Reticle: Quad Ballistic Circle Dot Reticle color: Red Adjustment increments: 0.5 MOA Water-resistance rating: IPX-8 Magnification: 1x Objective lens diameter: 20mm Total elevation travel: 100 MOA Total windage travel: 100 MOA Dimensions: 2.7"L x 2"W x 2.5"H Weight: 6.3 oz.

categories:Sporting GoodsGuns

6335 impressions

591 views

Baikal IJ 18 Single Shot Break Barrel 12 Guage 2¾" 26" Barrel Made in USSR Unsure of manufacturer year Shoots wonderfully with no issues. Sling mounts on it. No mechanical defects. Some cosmetic damage on the stock. Used for skeet shooting mainly and the odd pesky bird.

categories:Sporting GoodsGuns

5612 impressions

669 views

- 20 inch heavy barrel - threaded muzzle with cap - front mount sight - 1 piece pictanny scope mount - detached metal magazine - savage accu-trigger - aftermarket recoil pad

categories:Sporting GoodsGuns

2534 impressions

558 views

Swarovski X5 3.5-18x50mm in flawless condition. No ring marks or mounting marks. Easy elevation, windage turret set up for gun and load combo, and the glass is great for all light conditions, especially low light.

categories:Sporting GoodsGuns

8887 impressions

1375 views

Selling my Remington model 783 chambered in 300 Win Mag. Roughly 300 rounds through the barrel. Got it as a range rifle but it’s a little much for that. Comes with cheap riser, and the mounted Vortex Crossfire 4-12x44. Shoots great, nothing wrong with it. Looking to get $700 but will entertain reasonable offers

categories:Sporting GoodsGuns

6763 impressions

743 views

Brand new Non-restricted  Caliber: .308 WIN Capacity: 10 Action: Bolt Action Barrel Length: 24"  LOP: 330-355 mm Twist Rate | Number of Grooves: 1 : 10 / 4 Trigger Pull Weight: 6–13,5 Stock: Synthetic Weight: 5.3kg A sport special that combines the cutting-edge CZ 600 platform with a sophisticated chassis from the world-renowned MDT brand. This Light Grey cerakote-finished model features an MDT Elite Pistol Grip, adjustable cheekpiece on an AR-15-style buffer tube, and MDT CCS stock with adjustable LOP via butt pad spacers. It also comes with a Picatinny rail, M-LOK mounting points and an Arca Swiss rail. A specially designed MDT AICS 10-round magazine, equipped with a proprietary CZ follower, ensures fully reliable feeding from the ejection port. With advanced ergonomics, a heavy profile cold hammer forged barrel, and an innovative single-stage, easy-to-adjust trigger mechanism, CZ guarantees sub-0,75 MOA accuracy (five-shot groups at 100 meters using match-grade factory ammunition). Made in CZ

categories:Sporting GoodsGuns

15914 impressions

1656 views