Popular search terms:
.22 Lever in Alberta
$150 - $600
6 RiflesHenry lever action 22 Caliber
4 power scope. $600
Norinco 22 magnum bolt action
3-9 power scope. $500
Two 6.5 x 54 Mannlicher Carcano
$150 each $300 for both.
30 Remington pump action
$300
Cooey Model 60 22 Caliber.
4 power scope. $250
categories:Sporting GoodsGuns
26920 impressions
3774 views
Val Quentin, AB11 months ago

$2350
Winchester 1873 Winchester Model 73 Lever Action Rifle
44-40 Win, with 20 inch barrel
Model : M73 Short Rifle, Colour Case Hardened, Grade3
very early serial # 00034ZW73D
Made by Miroku , built to very high standards with close tolerances and excellent fit
New in the box, never fired
$2350 for rifle or
$2400 for rifle with 2 box Winchester (2 x 50 Cartridges) Cowboy Action Loads
I bought new in November 2014
categories:Sporting GoodsGuns
7884 impressions
448 views
Calgary, AB1 year ago
$7.50
Weaver Scope Bases - Sako, Marlin, Savage, Win, etc.....Weaver - Scope Bases - All come with screws
Shipping is a flat $5 via Letter Mail
(x) - denotes quantity available
---
Weaver No. 13 Base (1) - $7.50 each
Weaver No. 14 Base (2) - $7.50 each
Weaver No. 15 Base (4) - $7.50 each
Weaver No. 16 Base (1) - $7.50 each
Weaver No. 18 Base (3) - $7.50 each
Weaver No. 19 Base (2) - $7.50 each
Weaver No. 20A Base (2) - $7.50 each
Weaver No. 21 Base (2) - $7.50 each
Weaver No. 25 Base (1) - $7.50 each
Weaver No. 35 Base (3) - $7.50 each
Weaver No. 36 Base (2) - $7.50 each
Weaver No. 37 Base (2) - $7.50 each
Weaver No. 40A Base (1) - $7.50 each
Weaver No. 46 Base (2) - $7.50 each
Weaver No. 47 Base (1) - $7.50 each
Weaver No. 49A Base (1) - M70 Magnum Rear Base - $15.00
Weaver No. 68 Base (1) - $7.50 each
Weaver No. 72 Base (1) - $7.50 each
----------------------------------------------------------------------------------------------
Weaver No 65 & 67 - Sako Bases (1 Set) - $45.00
Weaver No 65 & 66 - Sako Bases (1 Set) - $45.00
Weaver No 65 & 66 - Sako Bases (1 Set) - $35.00
----------------------------------------------------------------------------------------------
Weaver - (1) - 1 Piece Base (Weaver Rings or 3/8" DT Rings) - Ruger 10-22 - $20 each
Weaver 53 (2) - 1 Piece Base - M88 - M100 - Sako Finnwolf - $25 each
Weaver No 63B (1) - 1 Piece Base - Marlin Lever - $25 each
---
Link to Weaver Scope Base Chart
https://www.weaveroptics.com/on/demandware.static/-/Library-Sites-HuntShootAccessoriesSharedLibrary/default/dw7047bf4e/productPdfFiles/weaverPdf/2016_WeaverMountsChart.pdf
---
DO NOT USE THE MESSAGING SYSTEM !
Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com
Click on my name "Jack Daniels" under the post date below to see my other ads
categories:Sporting GoodsGuns
109367 impressions
3570 views
Lacombe, AB5 days ago
$3980
Brand new BERETTA 692 Trap 12GA 30” 2-1 Fixed Chokes O/U Shotgun $3980 shippedBrand new
Over/Under
Non restricted
Caliber: 12 gauge
Chamber: 3"
Capacity: 2
Barrel Length: 30"
Barrel Finish: Blued
Adjustable trigger
Microcore® recoil pad
Opening lever with black rubber overmoulding for better grip
B-Fast® stock
Wide receiver improves stability and balance
Steelium® Plus barrels
Optimachoke® HP chokes
Weight: 5.5 kg
Made in Italy
categories:Sporting GoodsGuns
14940 impressions
1164 views
Calgary, AB2 weeks ago
$200
Brand new Mastermount Rear Biased Optic Mount $200Brand new
Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g.
The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself.
It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA.
Dual-Axis Locking
AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis.
The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis.
These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability.
Low Axis Over Bore
The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed.
The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained.
Built Rugged As the AK Itself
The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics.
Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking.
No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release.
Accessory Side Rail
Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories.
Compatibility
The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder.
Greater Optics Versatility. Superior Finish.
A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base.
The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.
categories:Sporting GoodsGuns
6263 impressions
614 views
Calgary, AB1 month ago
$400
Steambow AR-6 Stinger II Tactical Repeating Crossbow Pistol $430Introducing the AR-6 Compact Tactical Magazine Fed Crossbow.
Developed by Steambow Austria, the AR-6 Stinger II uses a top-fed 6-shot magazine.
The crossbow splits at the rear with the stock acting as a lever to draw the string, making actuation quick and easy.
The fiber optic sight allows fast and intuitive aiming, while a red dot sight or scope can be attached to the front Picatinny rail for even more accurate shots.
The AR-6 also features an internal accessory slot for use of an optional laser device.
Made of high-quality reinforced polymer, the AR-6 Stinger II is extremely lightweight, rugged, reliable, and accurate to target at distances up to 80 feet.
The AR-6 is easily disassembled and can compactly fit into a survival or bug-out bag.
Weighing in at just 2.6lbs the AR-6 is easy and convenient to use and transport.
The compact dimensions and light weight also make the AR-6 ideal for beginner and smaller statured shooters.
Coming with:
Vertical foregrip
Telescoping AR-15 style buttstock (commercial-spec buffer tube)
6 training arrows
2 strings
Stringing aid and manual.
Note: Because these crossbows are over 500mm in length and are not designed or altered to be aimed and fired by the action of one hand (handgun style) they are not prohibited class and therefore non-regulated items.
No PAL required.
Features:
•Open sights (rear sight & front sight) on top of the magazine
•Top Picatinny rail for red dot sights
•Full-length Picatinny rail on the bottom for foregrip or tactical light
•Integrated accessory compartment for integral laser sight
•2 external ports for attaching side picatinny rails
categories:Guns
12532 impressions
1092 views
Calgary, AB2 weeks ago
$499.99
ARKEN EP-8 1-8X28 FFP KL BOX MOA $499.99 EP8
1-8x28 FFP LPVO - 34mm Tube
The LPVO has long since earned its place, bridging the gap from holographic/ red-dot types to high magnification optics not traditionally well suited in CQC situations. With ever increasing capability, the LPVO has become a staple allowing tactical teams and competitive shooters to get the most out of any particular member, instantly. The EP8 1-8’s thin edges and wide FOV make this true 1X perfect for close quarters, with a quick throw of the lever to 8X increasing effective range at a moments notice.
Magnification:
1-8
Objective Diameter:
28mm
Eye Relief:
3.74"
FOV @ 1x:
121.15', 22 deg
FOV @ 8x:
14.56', 2.78 deg
Tube Size:
34mm
Turret Adjustment:
1/4 MOA
Reticle Position:
FFP
Reticle Details:
BDC style: 'KL Box'
Elevation Adj. Range::
110 MOA
Windage Adj. Range::
110 MOA
Illuminated Reticle:
Red
Turret Rotation:
Counter Clockwise (CCW)
Color:
Matte Black
Weight:
21 oz
Sunshade:
No
Battery Included:
CR2032
Throw Lever:
Integrated/removable
categories:Guns
8966 impressions
775 views
Calgary, AB2 weeks ago

