Full box of Blazer 240 grain 44 Rem Mag aluminum cased ammo. Box of 50. Bought the wrong stuff. $70obo. Must have valid PAL. Text or call 780-305-8796

categories:GunsSporting Goods

2094 impressions

62 views

1500.00 - Browning Medallion 7mm Rem. Mag; 26'' barrel with Boss. With Boss you can adjust to shoot any bullet accurately and reduces recoil. Some minor scoff marks on stock. Shoots the HSM 168gr. at 3140 f/s and about 2'' group at 300 yds. Also have drop chart to 800 yds. Second magazine and reloading RCBS dies. 1200.00 - Bushnell tactical 4.5 x 30 x 50mm with side focus. Scope set for 250 yds. and tactical dial up to 800yds. 810.00 - 119 rds. - HSM 168gr. Berger bullets. 50.00 - 20 rds. - Federal Premium 150gr. boat tail soft point. 40.00 - 19 rds. - Federal Power Shok 145gr. Speer Grand Slam No message. Emails only!

categories:GunsSporting Goods

80791 impressions

2323 views

Tikka T3x 7mm REM Mag Stainless Limbsaver MDT 20 MOA rail MDT Elite Rings Sterk Swept Bolt handle and shroud Bushnell Elite 4500 4-16x50 Unfired Over $3,000 invested. $2,400 firm.

categories:GunsSporting Goods

7526 impressions

321 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Only 1 remaining. Can hold for a non-refundable deposit. Can also do a payment plan. Popular and hard to find Marlin Dark Series. Brand new in box. I only took it out of the box to inspect. It has only been function fired by Marlin before leaving the factory as with all Marlin rifles. Comes with everything it does from factory. I also have a new in box Marlin Dark in 30-30 ($3250) and 44 Mag ($3500 - extremely hard to find). - 16” threaded barrel + thread protector - Durable graphite black cerakote - Radial muzzle brake - MLOK butt stock with cheek riser and flush cups - Hammer spur - MLOK & QD handguard - Extended length pic rail - Fiberoptic sights - Cable lock - Mid-sized finger lever for added comfort Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

93658 impressions

2584 views

I have over 30,000 once fired brass cases of many different calibers and head stamps for sale. Prices are as follows, followed by approximate amounts available. I can ship up to 5kg or 11 lbs anywhere in Canada for $20 flat rate. That would be (300 +-) 300 Win Mag cases and more of smaller cases. Check this ad periodically as brass will be added when available or deleted when sold out. 300 Win Mag $1.00 each (3,000 +- available) 7mm Rem Mag $1.00 each (2,200 +- available) 300 Win Short Mag $1.00 each (350 +- available) 7mm Win Short Mag $1.00 each (174 +- available) 270 Win Short Mag $1.00 each (SOLD OUT) 30-06 Springfield $.50 each (2,600 +- available) 308 Win $.50 each (1850 +- available) 270-Win $.50 each (1,650 +- available) 7mm-08 $.50 each (SOLD OUT) 243 Win $.50 each (800 +- available) 303 British $.75 each (350 +- available) 22-250 $.75 each (200 +- available) 30-30 Win $.75 each (500 +- available) 6.5 Creedmoor $.75 each (SOLD OUT) 350 Legend $.50 each (75 +- available) 223/556 $.25 each (5,000 +- available) 9mm Luger $.06 each (1,000 +- available) Some other smaller lots available. Text or email is best. Text: 780-876-5050 or email: jdwill1951@gmail.com

categories:GunsSporting Goods

148754 impressions

3960 views

Zeiss v4 4-16x44 with ZMOA-2 Reticle, is beautiful shape. Only mounted on the gun and sighted in. Looking to change everything over to mils. Wanting to go with a nightforce nx8 ffp mil c, If you got one I can add cash on top for it. All original boxing and manuals. Magnification range: 4 to 16x Field of view: 28.5 - 7.1 feet at 100yds Objective diameter: 44 mm Eye relief: 3.5 in Illuminated reticle: Yes Reticle position: Second focal plane Parallax adjustment: 10yds - infinity Ballistic Turrets: ASV-E / CAP-W Turret adjustment increments:1/4 moa Max elevation / windage: 80 x 60 moa Tube size: 30mm Weight: 640g / 22.6oz Length: 355mm / 14in

categories:GunsSporting Goods

17196 impressions

713 views

Once fired 7mm mag brass. Remington head stamp

categories:GunsSporting Goods

7839 impressions

223 views

2 full boxes (40 rounds) x Federal Powershok 150gr jacketed soft point @ $60 each Located in Airdrie.

categories:GunsSporting Goods

2521 impressions

186 views

Clearing out the following mags..... CZ 452 17 HMR 10 round, NEW $45.00 CZ 512 22LR, 25 round, have 2 $35.00 each Ruger 77 22LR $30.00 Ruger 77 22mag/17hmr $30.00 A-Bolt 280 Rem $75.00 X-Bolt 6.5 creedmore $60.00 X-Bolt standard long action $65.00 Marlin 89 22LR $40.00 Savage 99 243/308 $175.00 Tikka LSA 55 308, have 2 $200.00 each XPR standard short action $30.00 Mossberg 14A 22LR $30.00 Tikka T3 6.5 PRC extended $85.00 CIL 830, 222Rem $50.00 A-Bolt 7mm Mag $75.00 Remington 760 308 $75.00 Remington 7600 30-06 $50.00 A-Bolt 260 Rem NIB $100.00 Marlin 17 HMR silver, 2 of them $35.00 each A-Bolt 204 Ruger $85.00 Shipping is on you!

categories:GunsSporting Goods

8464 impressions

462 views

Brand new Non-restricted  Caliber: .223 REM Capacity: 5+1 Action: Bolt Action Twist: 1:9 Barrel Length: 20"  LOP: 14.5" Full Length: 39.3" Weight: 7 lbs Stock: Wood M15x1 threaded muzzle Cold Hammer Forged Barrel Trigger Resistance: 6-13.5N Vertical Safety Locking Magazine Wooden Bolt Knob Fish scale checkering for enhanced grip texture Oil finished walnut stock Bavarian-styled cheek piece Made in CZ

categories:GunsSporting Goods

16653 impressions

760 views

Lee Ultra .30.06 $70 All 2 die sets $40 Forster UltraMicrometer in 7mm rem mag $75 SOLD. Text is best 780 978 0172. Buyer pays shipping. .280 RCBS SOLD. .308 win SOLD.

categories:GunsSporting Goods

13658 impressions

900 views

Excellent condition 7 rem mag, its is antler’s ‘mountain’ model, sako clone steel action, carbon fibre stock, detachable mag. 24 inch barrel, with 40 rounds down. No trades, and no shipping. Thank you

categories:GunsSporting Goods

18761 impressions

1127 views

!!!!!12 boxes factory ammo included for local sale!!!!!!!Heres a very good Remington model 7 300 short action ultra mag,,remington factory laminate stock , factory rifle sights,leupold bases and rings,,bushnell elite 3-9x40,,,nice lightweight rifle in a powerful calibre ballistically  near the same as 300 wsm,,beautiful rifle low round count,!!!!!  almost 12  BOXES of Factory Ammo included!!!!!!!!!!!’and brass  included!Ammo alone cost $1400

categories:GunsSporting Goods

5386 impressions

405 views

Top,rugger American 6.5creedmore .new condition.older scope 800$ Middle,browning 7mm rem mag a bolt 1300$. .sold Bottom Remington 700 in7 mm rem mag ,very good condition with scope rail and open sites 1200$

categories:GunsSporting Goods

21322 impressions

2720 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19892 impressions

731 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan. Popular and hard to find Marlin Dark Series. Brand new in box. I only took it out of the box to inspect. It has only been function fired by Marlin before leaving the factory as with all Marlin rifles. Comes with everything it does from factory. I also have a new in box Marlin Dark in 45-70 ($3250) and 44 Mag ($3500 - extremely hard to find). - 16” threaded barrel + thread protector - Durable graphite black cerakote - Radial muzzle brake - MLOK butt stock with cheek riser and flush cups - Hammer spur - MLOK & QD handguard - Extended length pic rail - Fiberoptic sights - Cable lock - Mid-sized finger lever for added comfort Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

522 impressions

57 views

This trimmer is made by LE Wilson of Cashmere Washington and is for 264,300 338 Winchester magnums and Remington 7 mm magnum. In almost new condition and works like a charm. Text please. Buyer pays shipping.

categories:GunsSporting Goods

13546 impressions

614 views

I have 4 boxes available @ $60 a box Would consider trade for 7mm Rem Mag.

categories:GunsSporting Goods

18132 impressions

389 views

Very nice Belgium made Browning 7 rem mag. Made in 1962. Stock is almost flawless, checkering is crisp. Blueing is perfect and the action looks like it’s barely been cycled. Has a period correct Bausch & Lomb 2.5-10 scope on it. This rifle is incredible shape, almost looks unfired. Missing front sight blade and rear sight.

categories:GunsSporting Goods

1706 impressions

112 views

For Sale - one original Tara TM9 9mm pistol 10rd cap. magazine $55 - firm! 1 available Condition: Brand new - loose (no packaging) / not used or loaded / 17rd cap. mag crimped to 10rd (view picture attached). EMT or cash - Remote pick up available by appointment only (cash) or house drop box or shipped (emt) at buyers expense within Canada only. Small package/tracked, all provinces - $22 Text, email, or leave message No trades, offers or deals at this time! All sales are final. If this ad is still up then item is available

categories:GunsSporting Goods

25754 impressions

1313 views

Bergara B14 HMR RH chambered in .308 (20in barrel, 1:10 twist) with Bergara 5rd AICS mag & 3 spacers. In addition, comes with 2 Magpul 10rd AICS mags in OG packaging (worth $130), Talley one piece picatinny rail (worth $80), and Masterlock trigger lock w/ key (worth $30). Less than 200rd count, gun regularly prints 5rd sub-moa groups, even with some non-match ammo. Package option for $2375 includes a B&T Accushot BT46-LS17 PSR bipod, BT74 Atlas Raider Cleat feet, BT22 Atlas 3" leg extensions, and BT15 4" Atlas Picatinny rail adapter. Comes with a velvet lined bag with drawstring top to carry the cleat feet and leg extensions. Bipod can pivot 0°, 45°, 90°, 135°, and 180°. Attaches to pic rail through QD lever. Altogether, spent $900 on this bipod system. Can be yours for $725. Provides an extremely stable, rock solid shooting position. PAL and email required. Not interested in trades. Shipping can be arranged on buyer's dime. Open to local sale.

categories:GunsSporting Goods

2587 impressions

127 views