Troy pump action rifle with Troy flip up sights Extremely low round count ( under 100 ) This is the highly desired folding and telescopic stock in 300 blackout that uses standard AR mags. This is a non restricted rifle and is legal for hunting. Rifle can be fired when folded without any issues. Looking for 1700 obo Located near red deer

categories:GunsSporting Goods

6129 impressions

934 views

Fully Custom 700 in 7 mm Rem Mag Action Trued and Blue Printed by Ron Smith 24" heavy PALMA RKS Barrel Left Hand Gain ending in 8 ATRS Recoil Lug Bolt Sleeved, Fluted, with new firing pin and Bushed to be true Sako Extractor Swept back extended bolt handle with Badger Ordanance Bolt Knob Hawkins Bottom Metal Accurate Mag 3 shot Magazine Insite Arms Muzzle Break Bedded Grey Bull Stock (Green and Black web) ATRS 25 MOA rail Action and Rail Ceracoated Black Barrell is Bead Blasted Stainless 50 Norma Brass Included If local sale 2 pounds of H1000 can be included as well

categories:GunsSporting Goods

27146 impressions

2126 views

Hello everyone. I have for sale a Savage 10 Law Enforcement Edition in .308 that has been my go-to hunting rifle for the last 3 years. It has a cheek riser, directional muzzle break, 24 in heavy fluted barrel, 20 MOA rail, long range scope with heavy duty hand lapped rings, 2 proprietary Savage magazines,an extra rubber butt pad to reduce recoil even more, 3 position safety and tactical bolt knob. The stock is with the bedded aluminum chassis for rigidity and precision. The AccuTrigger is adjusted at 2 lb. This is a very very accurate rifle. Here are some bullets tested with a 3 shot group at 100 yards: Sako powerhead blade 162 gr - 0.4 in Herters soft point 150 gr -0.45 in Federal berger hybrid hunter 168 gr - 0.48 in Sellier & Bellot soft point 180 gr - 0.48 in Norma soft point 150 gr - 0.74 in Sako superhammerhead 180 gr - 0.8 in Did load development for it with Barnes TTSX 130 gr and obtained 0.35 in at 100 yards . The scope is a SKW Optics 5x30x56 FFP in 0.5 MIL/click. The scope is high quality and tracks well. It s a 34 mm tube with lots of internal adjustment. It comes with everything already done and researched. You don t have to do anything.The rifle was $900 ,scope was $700 muzzle break $100 ,butt stock pad $40, scope rings $100,scope rings handlapping $50, extra magazine $100,trigger adjustment $50. The rifle is ready to shoot. Doesn't need anything. About 300 rounds through it. Currently sighted at 300 yards. Sold as a package since the scope rings are hand lapped for this rifle. No lowballers. Gun case not sold with the rifle. Willing to ship at owner's expense about $70. Thanks 

categories:GunsSporting Goods

35245 impressions

1478 views

Remington 700 Classic Edition Chambered in 257 Roberts. Nicely Figured Walnut Stock, High Polish Blued Barrel. Jewelled Bolt. Factory Butt Pad. Limited Production Run in 1983 by Remington Arns Company PAL REQUIRED

categories:GunsSporting Goods

39 impressions

19 views

Selling a mixed lot of ammunition totaling 1,655 rounds. Ideal for range use or collectors looking for multiple trusted brands in one package. Breakdown includes: 700 rounds – CCI Standard Velocity .22 LR 200 rounds – CCI Mini-Mag .22 LR 450 rounds – Blazer .22 LR 150 rounds – Aguila .22 Super Colibri 20 rounds – Hornady ZombieMax .45 Auto 6 loose rounds – Remington .38 Special 29 extra loose rounds – CCI Standard Velocity .22 LR Stored in an old military ammo box. Reason for selling: Clearing out extra stock. Local pickup preferred Postage on buyer Notes: Buyer must legally be able to own ammunition in Canada.

categories:GunsSporting Goods

51 impressions

21 views

Remington 700 LTR (Light Tactical Rifle), chambered for .308 Win, it features a slimmed down HS Precision stock to improve portability and reduce weight. The stock incorporates a with full length aircraft aluminum bedding block stock that is Kevlar and fiberglass reinforced so it stays dimensionally stable under the worst of adverse conditions, hex-head Allen screws to secure the barreled action, and make the barrel free floating. It also has an extra sling stud at the front to mount a bipod like the Harris Bipod. The flutes in the 20″ LTR barrel not only assist in weight reduction and heat dissipation, but are engineered to enhance barrel rigidity for pinpoint accuracy and is finished with a crowned muzzle. It comes with Timney trigger make this rifle extremely accurate and also comes with Leupold Mark IV 20 MOA Picatinny Rail. The LTR was designed as a lighter weight, compact tactical rifle for urban situations but I find it perfect hunting rifle for its precision, compact and lightweight. I only fired it to break in the barrel and sight-in in the range and have it ready for hunting, around 150 rounds give or take. It’s .5 MOA groups guaranteed at 100 yards with 168 gr. match grade rounds. Will ship anywhere in Canada at buyers expense, also available for pick up and delivery in Edmonton, Alberta

categories:GunsSporting Goods

9128 impressions

1169 views

Brand new Non restricted Action : Lever Caliber : 410 GA Barrel length : 18.5″ Chamber : 2.5″ Capacity : 5+1 Finish : Black Furniture :  Black Walnut Stock & Birds Head Grip Hand Grip : M-lok with picatinny accessory rails. (aluminum) Choke Kit : F, IM, M, IC, SK, including case and key Front sight : Red Fiber optic Safety : Cross bolt Made in Turkey

categories:GunsSporting Goods

5111 impressions

627 views

Brand new Non-restricted Caliber: 308 Win/7.62x51 NATO Capacity: 4 Action: Lever Action Safety: Transfer Bar Receiver Finish: Hard Anodized Black Barrel: 20" Round Blued steel Scopeability: Drilled and Tapped Scope Mount Type: Included Stock Material: American Walnut Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:10 Overall Length: 40.5" Weight: 7.0 lbs. Made in USA

categories:GunsSporting Goods

5259 impressions

789 views

Brand new Non-restricted Action: Lever Action Caliber: .44 Rem Mag Capacity: 5+1 Barrel Length: 12" Overall Length: 24” Weight: 6.6 lbs Rear Sight: Skinner Peep Stock: Black Painted Wood – Textured Finishing: Matte Chrome Extraction: Ejector Made in Italy  

categories:GunsSporting Goods

3878 impressions

606 views

Brand new Non-restricted Action: Bolt Caliber: 308 Win Capacity: 5 Weight: 107 oz Barrel length: 22" Full length: 42" Trigger weight: 33.5 oz Machined steel receiver Precisely rifled barrel Matte black finish 6-lug bolt locks directly into the barrel 60° bolt rotation DURA SAFE direct firing pin safety EVER REST action bedding 14.4 inch length of pull Ambidextrous stock with symmetrical palm swells Removable double-stack magazine Accepts Remington 700 long action scope base mounts Accepts Remington 700 scope base mounts Made in Germany

categories:GunsSporting Goods

24406 impressions

1899 views

Savage 10FP action Benchrest gun. Built by EM Precision Alberta. MOA at 1000 m. $950 Entire chassis from MDT: Stock, bottom metal and butt stock. $700 Savage 10FP action $150 Trigger by Sharp Shooter Supply. Adjustable from 1 1/4 Ibs to 2 lbs. $1200 Barrel Rob Jury 26" heavy barrel with 3 gill brake, 1 - 10 twist. $1400 Scope is Vortex viper Gen 1, 5-25 × 50 FFP. Sun shade. Warne Rings. $80 Tipton 40" cleaning rod x2 Jags (swab and brush). $120 Mags ×2 - polymer MDT 10 RND and metal Accurate-Mag 10 RND. $150 Bipod Harris cantilever adjustable. $570 Pelican 1750 Case cut out to fit rifle and accessories. $5320 Total All ceracote black. Email only rileyweldingltd@gmail.com $3000

categories:GunsSporting Goods

8889 impressions

742 views

ATRS built Brand new unified Remington 700 SPS 300wm bedded in McMillan A5 stock. Lots of extras including pelican case. ATRS receipt included Need it gone as I’m moving so make me an offer.

categories:GunsSporting Goods

3220 impressions

495 views

Stock was painted black, but overall works as it should $150 obo

categories:GunsSporting Goods

2335 impressions

410 views

Brand new High Quality Dehorned Scope Mount Base Based on a decade of experience designing and manufacturing the original Ideal Scope Mount System – including a vast number of accessories – as well as forends and stock assemblies for various firearms The Picatinny Gen2 scope bases feature properly dehorned edges for improved repeatability and a smooth touch. Using 7075 T651 aluminum combining strength and durability with low weight. Rail comes with 6-48x1/4" Torx 10-screws and stainless steel pins for optional pinning of the scope base to the action. Tilt: 6 MIL/20.6 MOA Height: 10 mm/0.39” Length: 155 mm/2.16” Weight: 60 g/2.1 oz (w/ screws - add 0.8 g/0.03 oz for pins) Note: Will also fit Mauser M18. Will not fit rifles threaded for 8-40 scope base screws, such as the Bergara Premier Series. Recommended torque for Torx 10 screws is 15-18 in/lbs.

categories:GunsSporting Goods

6100 impressions

346 views

Brand new While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit– TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in USA

categories:GunsSporting Goods

2071 impressions

348 views