Wow, here is an opportunity to own something truly unique. Overall condition, very good.  Make: MFG FRANCAIS D'ARMES & CYCLES DE ST ETIENNE Model: Joesph Dumonthier Cane Gun Caliber: 9MM FLOBERT RF (have ammunition 50 birdshot, 50 bullets.)  Bore: Very Good, Shiny Comes With: Brass and Lead Muzzle Cover, Steel Butt Stock Action: Single Shot Rimfire Cane Gun  No sights, brown tapered steel barrel, engraved blued receiver, smooth curved horn grip, removable brass plug which allows threaded blued steel shoulder stock to be attached. Metal finish shows some scratches, handling marks and wear. Grip shows some marks, scratches and wear.  Barrel Length: 31"  Serial: 18921 Canadian Antique, No PAL Required Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

5951 impressions

250 views

Just in time for Christmas , Overall, the condition of this model eight is in good to very good condition. The pictures hopefully speak for themselves. No cracked wood. Everything appears to function as it should. Serial Number: 40571 on receiver and 40571 on the band in front of receiver. *I also have ammunition that can be purchased and shipped separately at additional cost If needed. Can ship anywhere in Canada, Please see my other ads for collectible, firearms, and accessories.

categories:GunsSporting Goods

36638 impressions

968 views

Cal. 303 Brit. S# 94L8460. Bbl. 25 1/2”. Blade front sight with protective ears. MK3 ladder aperture rear sight graduated to 1200m. Mismatched numbers. Left side of the receiver is marked with No. 4 MKI*, Long Branch, and 1950 markings. Arsenal rework Suncoirte finish. Hardwood stock with grooves set with bottom-mounted sling swivels and canvas marked sling. MAG. one 10-rd. CONDITION: stock set has a darkened appearance with a few light, scattered dings, scratches, and handling wear. Metal shows overall fading to gray with a Suncorite and finish. Action functions properly when hand-cycled. Very good to excellent bore. Spiked Bayonet and metal scabbard can be added for an extra $50 Can ship anywhere in Canada, Please my other ads for rare and collectable firearms and accessories.

categories:GunsSporting Goods

47296 impressions

1749 views

Brazilian Model 1908 Mauser Rifle unissued 116 years old! Excellent pre WW1 German craftsmanship and quality. Manufactured under contract to Brazil, left side of the receiver stamped DEUTSCHE WAFFEN-UND/MUNITIIONSFABRIKEN.BERLIN. The right side of the chamber stamped MOD.1908. Complete with bayonet and brass mounted leather scabbard. Excellent un-issued condition. All original matching numbers. 7mm Mauser. Can Ship Anywhere in Canada, Please see my other collectable rifles and accessories.

categories:GunsSporting Goods

57249 impressions

1623 views

Great little rifle made in Germany Diana R-22 22LR, Carbon fiber wrapped barrel, super accurate, less than 200 rounds shot, all the rounds were shot CCI mini mag 36gr. Diana R-22 features an ergonomic all-weather polymer stock in an attractive OD Green. The hammered precision carbon fiber wrapped barrel comes with a 1/2” UNF muzzle thread with countersunk muzzle. The dry-standing direct trigger offers an adjustable trigger weight of approx. 2-2.9 lb. Picatinny rails on receiver and forend allow for sturdy optics and bipod mounting. With a proven heritage of precision and accuracy the new Diana R-22 rimfire rifle sets the new standard in performance rimfire target shooting. Caliber: .22LR Capacity: 10 Rounds Action: Bolt Action Stock: Fixed, Polymer, OD Green Sights: Open Barrel: 18.5" Carbon Fiber Trigger Weight: 4 lbs. Overall Length: 37.5" Weight: 6.1 lbs. *** Notice, in order to purchase this rimfire rifle must comply with the law, I am required by law to see possession of legal firearm license and verify by RCMP website***

categories:GunsSporting Goods

13050 impressions

601 views

Browning BAR Mark II Safari semi-automatic with BOSS muzzle brake system, 30-06 sprg caliber, 22 inches barrel, traditional stock, polished blued steel barrel and engraved receiver, select gloss walnut stock, rounded forearm. This rifle is in a mint condition, no scratches, no dents, no dings, no discoloration, zero issues. ***Scope is not included*** Action Length: Long Action Caliber: 30-06 SPRG Barrel Length: 22" Overall Length: 43" Length of Pull: 13 3/4" Drop at Comb: 3/4" Drop at Heel: 1 1/8" Weight: 7 lbs. 14 oz Magazine Capacity: 4 Twist Rate: 1:10" Barrel Finish: Polished Blued Stock Finish: Gloss Wood Grade: Grade I Receiver Finish: Polished Blued Chamber Finish: Chrome Plated Chamber Barrel Material: Steel Barrel Contour: Sporter Stock Material: Turkish Walnut Recoil Pad: Polymer Checkering: Cut 18 LPI Sling Swivel Studs: Steel Integral Receiver Material: Steel Trigger Finish: Gold Plated Magazine Type: Hinged Floorplate with Detachable Box Trigger Material: Alloy Trigger Guard Material: Alloy Trigger Guard Engraving: Buck Mark in Gold Floor Plate Material: Alloy Drilled and Tapped for Scope: Yes In order to purchase this rifle, must comply with the law, I am required by law to see possession of firearms license, validation of firearms license with RCMP date of birth and Email is required. I am willing to ship Canada wide at buyers expense.

categories:GunsSporting Goods

33832 impressions

1637 views

Remington 783 .308 win, 24" medium profile barrel, black cerakote finish barrel and action, flat dark earth color stock, it comes with a Vector Optics Scope, a picatinny rail, and scope rings. The scope is a Vector Optics Atlas 5-30x56 SFP Long Range Riflescope 35mm Tube, 1/8MOA illuminated, Elevation Range: 85MOA,Windage Range:85 MOA German HD Schott glass. Specification Model: Remington 783 Action: Bolt Magazine Type: Detachable Stock Type: Fixed Trigger Type: CrossFire Muzzle Type: Threaded Magazine Capacity: 4 Caliber/Gauge: 308 Winchester Twist Rate: 1:10″ Receiver Material: Steel Stock Material: Synthetic Barrel Finish: Matte Blue Stock Finish: Flat Dark Earth Barrel Length: 24″ Length of Pull: 13-3/8″ Overall Length: 43-5/8″ Weight: 7 lb Drop at Comb: 1″ Drop at Heel: 1-5/8″ Barrel Type: Medium Profile Button-Rifled To purchase this rifle, must comply with the law, I am required by law to see two pieces of ID: possession of firearms license and a piece of ID. I do offer shipping Canada-wide at the buyer's expense.

categories:GunsSporting Goods

69688 impressions

2745 views

1943 Mosin M38 in M44 stock. Bolt, receiver, and floor plate are matching. Butt plate is a forced match. Good bolt face and bore, not counter bored like most of them. PAL required and NO shipping!! Text or calls only!

categories:GunsSporting Goods

79359 impressions

5248 views

Winchester Model 53 (1926) Take Down - 25-20 Win, 22" Barrel, Half Magazine, Take Down Receiver, Win 98A Receiver Peep Sight. Excellent bore and original condition. $6,500.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

56998 impressions

2278 views

1) Browning Belgian SA-22 Dove Tail Flip Down Rear Sight  -  $165.00 . 2) Browning Belgium T-Bolt Firing Pin  -  $100   . 3) Browning Belgian Original Gold Bead Front Sight   -  $85.00 . 4) Browning Belgian T-Bolt - Receiver Sight  -  $185.00 . 10) 6-48 Filler Screws (4) - Blue   $20.00 . 11) 3/8" DT Filler - Curved Top - $45.00 . --- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads.

categories:GunsSporting Goods

70375 impressions

2573 views

Fabarm 12 gauge magnum semi automatic shotgun manufactured in Bruscia Italy, engraved receiver, V/G condition, nice shiny barrel

categories:GunsSporting Goods

39928 impressions

1289 views

NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:GunsSporting Goods

217591 impressions

17827 views

I have a Model 1908, 12 gauge single shot, Harrington and Richardson arms CO( Worcester.mass.USA made in USA) (12 gauge choke) for sale. This 12 gauge single shot has had the barrel shortened to about 20 inches. Barrel and receiver are in nice condition with little to no scratches shown in pictures. Wood has nice handmade woodburning engravings of two dragons on butstock, forend had wood it ing of dragon eye. Buttstock had been repaired showed in pictures. Gun is in overall good working condition. Open to trades. Located in evansburg but make frequent trips to spruce grove .

categories:GunsSporting Goods

48895 impressions

1360 views

This is a Budapest M95 steyr (mannlicher) rifle chambered in 8x56r. It is an arsenal force match SN 5988H. Straight pull bolt action, 5rd clip fed (1clip included with rifle). History: prior to WWII the 1895 mannlicher rifles were cut down to carbine length and rechambered from 8x50r black powder to the more powerful 8x56r smokeless cartridge which is indicated by the “S” on the barrel and score line on receiver and barrel. There is a few variations of these rifles most commonly having the “M95” engraved on the receiver with a “steyr” or in this rifle’s case “Budapest”

categories:GunsSporting Goods

16059 impressions

834 views

1910 Carl gustafs 6.5x55 Swede mauser SN 262063 partially matching, reciever and bolt matches. Near full furniture (missing the armoury dial as seen in picture of right side. Light to moderate wear on wood, it is over 100 years old, crest is in very good sharp condition. Barrel, receiver, and bolt has not been reblued floor plate, and trigger assembly looks like it has been reblued. stock has not been sanded. Metal stamps are sharp with Swede crowns populating the bolt, barrel, sights and receiver.

categories:GunsSporting Goods

19411 impressions

846 views

This is a VZ24 Czech 8mm mauser with the “E lion” crest The receiver has formed a patina finish to it but the crest is deep and all details of the lion is clear. It is a non matching full furniture rifle. Top hand Gaurd is cracked the bands hold it together. Light/normal wear/scratches on stock wood and metal has not been refinished. Front sight is missing the VZ sight Gaurd a common part missing and not to hard to source, front sight is correct with the sight gaurd channel so the fix is easy as sourcing the part and sliding it in the channel. History: sourcing is a bit hard as many documents were lost/destroyed or not maintained during and post WWII. Some information I Did find on the E lion crest was some can be as old as 1935 but most with records dated and started to show up in 1936 they started to disappear in 1939 and many receivers with the Czech lion were required to be scrubbed after Germany absorbed Czechoslovakia during WWII.

categories:GunsSporting Goods

16165 impressions

689 views

As of 2024-12-05, this product is no longer available for sale. Next expected availability October 2025. Stay strong Canada! Shipping across Canada included, *Email only please* 1 Part - $25 Shipped 2 Parts - $35 Shipped 3 Parts - $45 Shipped 4 Parts - $55 Shipped (Full Upgrade) *+$10 for the Low Profile Front Optic Rail **Any combination of the parts are available ***EMT is King Shipping via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design/invention/product) Double Tap Trigger Over Travel Limiter - Replaces the Factory Trigger Spring Plunger - Reduce the Over Travel by 85% for Quick and easy "Double Taps" - Material: Precision Machined Stainless Steel Extended Charging Handle - Replaces the Factory Charging Handle - 50% Longer and Knurled Finish for Easy Access - Material: Black Anodized Aluminum Extended Magazine Release Button - Replaces the Magazine Release Button - Larger Textured Protruded Release Button for Easy Access and Quick Magazine Change - Material: Black Anodized Aluminum Barrel Mounted Optic Rail - Mounts on the Barrel (Replaces Factory Rear Sights) - Prevents Optics from Losing Zero from Take Down - Rail Height is the same as the Receiver - Optional 3rd Mounting Hole. Rail can now be mounted forward/backwards 1/2". *Only 2 of 3 screws is sufficient for mounting. - Material: Black Anodized Aluminum Low Profile Front Optic Rail M-Lok - Mounts on the M-Lok handguard - Rail Height is the same as the Receiver - Designed to fit most front backup sights (BUS) secured via a single screw - 2x M-Lok Screw/Nut included - Black Anodized Aluminum

categories:GunsSporting Goods

159702 impressions

13813 views

-Ruger American Target Model,Black Laminate stock,18" 0.86 Threaded bull Barrel w/ thread protector ,Free- Floating. -Marksman Adjustable trigger,3-5 lbs settings.     Receiver bolt-release for safe ,easy removal. -Ruger OEM 9 rd rotary,  plusBX-15 mag.  Extended Mag release. Visble Tang Safety. -UUQ 6-24 X50 AOEG  Illuminated reticle scope w/Parralax correction.  Slings mounts & sling.       Gently used rifle in premium condition,Very accurate ! Local sale preferred,PAL verification will be done,No Trades,Serious Inquires only,Please.

categories:GunsSporting Goods

850 impressions

55 views

Marlin Model 27-S (1926) - 25-20 Win, 24" Barrel, Take Down Receiver, Original Sights. . Excellent bore and 95% original condition. . $2150.00 --- Ammunition is also available. --- DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

2600 impressions

111 views

I have an excellent condition antique French percussion pistol from the time of King Louis-Phillippe circa 1830s for sale. This firearm requires no license to own or shoot due to its age. I bought this gun from a Quebec antique arms dealer a few months ago and unfortunately need to move it on due to house renovations. This gun had its lock repaired by Bernard Riendeau, a Quebec master gunsmith specialising in antique arms. It is fully functional. This gun is in excellent condition, excellent bore, all engraving and wood intact. There are some small dents here and there on the stock, and minor wood loss around the front stock pin. There is some pitting around the nipple area as seen in pics. This gun had been test fired by Bernard, but I haven't had time to try it. Because the lock was rebuilt it is quite stiff. Half and full lock are, of course present. The engraving on the top of the receiver says Patent Rohre, with serial number 6923 engraved on the bottom of the grip. It will come shipped with the letter of authenticity as well as a silicone gun sock. I am looking for $1750 shipped by Canada Post. Selling under retail price for a quicker sale. Cash or EMT only. NO TRADES PLEASE. Insurance is extra and on the buyer.

categories:GunsSporting Goods

1527 impressions

82 views

Brand new Non-Restricted Lever action Caliber: .44 MAG Capacity: 9 Stock: Black Laminate Receiver Material: Alloy Steel Receiver Finish: Matte Blued Front Sight: Brass Bead with Hood Rear Sight: Adjustable Semi-Buckhorn Barrel Length: 20.25" Thread Cap: Match-Polished Barrel Material: Cold Hammer-Forged Alloy Steel Barrel Finish: Matte Blued Twist Rate: 1:16" RH Grooves: 6 Weight: 6.2 lbs. Overall Length: 37.5" Length of Pull: 13.38" Made in USA

categories:GunsSporting Goods

8480 impressions

459 views