KRICO 600, 222 REM, very smooth bolt operation, European stye schnabel tip forestock 13 1/2 LOP, 25 1/2" ( 650mm) BBL, 5 round detachable mag, front sight could use a hood and rear sight missing (big dovetail), headspace good, rifling and throat very good( borescoped), bluing good, took on trade was missing mag( $275) took me a year to find one, broken screw in base hole repaired and put bases on, ready to go.

categories:Sporting GoodsGuns

9631 impressions

754 views

Brand new Non-restricted Caliber: .22LR Rate of Twist: 1:16" Magazine Capacity: 5 Magazine Type: Detachable Stock: Sculpted Walnut Sights: Integral 11mm Dovetail Barrel: 20.5″ Cold Hammer Forged, Varmint Match Target, Threaded Trigger: Fully Adjustable Safety: Two-Position, Push-To-Fire Length: 38.25″ Weight: 7.23 lbs Made in CZ

categories:Sporting GoodsGuns

13762 impressions

740 views

1) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45.00 each for one screw - $40 each for 2 or more 2) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45.00 each for one screw - $40 each for 2 or more 3) Marlin 336 - 1894 Rear Barrel Band Screw - $45.00 each for one screw - $40 each for 2 or more 4) Marlin Tang Sight Screws (2) - $45.00 --- 5) Marlin Bullseye Stock Inlay - $35.00 6) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 7) 8-40 Pan Head Filler Screws (2) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

20585 impressions

403 views

1) Remington No. 701 Rear Sight w/ Elevator $75.00 6) Remington Dovetailed Front Sights $75 - $85 7) 6-48 Filler Screws (4) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 9) 6-48 Filler Screws (4) - Stainless - $20.00 10) 8-40 Pan Head Filler Screws (2) - $20.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

24810 impressions

554 views

.54 cal Rice rifle barrel. 44" breeched for flint. Swamped. Rifling is 1-66" twist. C profile. Breechplug installed. No dovetails cut. Barrel is new. Bought from Track of the Wolf. Bought this to make another rifle but decided against it. Too late to return. Have original receipt. For more details check track cat # Rice-54-AH-C Willing to discuss trades.

categories:Sporting GoodsGuns

2021 impressions

321 views

New inbox never used never mounted RM RUGER #1 & 77/22 1" SUPER HIGH EXT MATTE Part # 52308 Leupold ringmounts are a high-quality alternative to firearm manufacturer ringmounts or as a no-tap mounting method for most .22 rimfire rifles with an 11mm, 13mm, or 3/8'' dovetail rail. This model is designed to fit a Ruger No. 1 & 77/22, and because these rings are machined from solid steel, they offer superior integrity and tighter tolerances.

categories:Sporting GoodsGuns

16668 impressions

386 views

Made in America, new, aluminium, 1" scope rings for .22/Airgun dovetail mounts.

categories:Sporting GoodsGuns

10169 impressions

321 views

Winchester Lever Action Repeating Rifle, .38-40 WCF, mfg. 1890. This is a good honest original ‘73 fresh out of a very old local collection. Standard length 24" octagon barrel retains it’s original dovetailed blade front sight and adjustable buckhorn rear. The metal has a mottled dark gray patina overall with some traces of original bluing remaining within protected areas around the sideplates, trigger, and along the dust cover rail. Sharp edges with generally smooth surfaces throughout. Some very light surface oxidation spotting forming toward the muzzle. The stock retains about 40% factory varnish with the balance worn to a pleasing dark untouched patina. Tight wood-to-metal fit with moderate wear overall and a just really honest, unmolested appearance. There is some very minor chipping along the edges of the butt and a super tight old 1" hairline crack at the front left side of the forearm. Original hammer, trigger, lever & locking nut, loading gate, dust cover, buttplate with trapdoor compartment (cleaning rod absent), forend cap, and magazine tube & band. Screws appear to be original. Crystal clear original barrel address, caliber marking, model designation, and serial number "336159" on lower tang. Action is very smooth, crisp, and secure and functions perfectly. Rifling is worn and pitted at the very tip of the muzzle but otherwise the bore shows good rifling overall with moderate/heavy blackpowder frosting and pinprick pitting scattered throughout. A very solid original '73 Winchester with a great Western look..

categories:Sporting GoodsGuns

8528 impressions

224 views

Weaver steel 1inch dovetail scope rings in mint cond.less than half price, text or leave message on townpost only

categories:Sporting GoodsGuns

2131 impressions

366 views

Marlin Model 56 .22L/LR barrel and receiver. PAL REQUIRED. Bore excellent, blueing fading and thinning near muzzle. Factory cut dovetails for scope mounting, 2 frame screws included.

categories:Sporting GoodsGuns

11741 impressions

1050 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:Sporting GoodsGuns

87770 impressions

2576 views

These scope rings are excess to my needs so it’s time for a bit of house keeping. Two sets of Ruger stainless steel rings. One set of high and one set of medium, both are for 1 inch scope tubes. ***SOLD*** One set of steel 1 inch diameter x 3/8” dovetail for rimfire or perhaps pellet guns. $25.00 One set of Vortex 30-mm diameter, extra high. $60.00 One set of quick release 1-inch, medium height, blued steel. $40.00 One set of Tikka 1-inch mediums that bolt directly to the receiver top. Rear ring is adjustable for windage, material is blued steel. $50.00 One set of Remington 700 1-inch integrated rings. $40.00 Williams peep sight for Marlin 336 rifle. $50.00 I'm looking for a 44-40 die set and will trade some combination of the above for dies. Thanks for looking, text is best but I do check the messaging system occasionally.

categories:Sporting GoodsGuns

24151 impressions

947 views

1) Marlin S-25 Rear Sight & Elevator  -  $125.00  2) Marlin S-25 Rear Sight & Elevator - Stepped  -  $145.00 3) Marlin 39 (post 72) Folding Rear Sight & Elevator  -  $170.00 4) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 5) Marlin Front Sight Ramp Insert - (298")  -  $75.00 6) Marlin Hood (1972 to Present Day)  -  $60.00 7) Marlin Hood (pre 1972 Rifles)  -  $45.00 8) Marlin Bullseye Stock Inlay  -  $35.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45 10) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 11) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

53679 impressions

1714 views

1) Marlin 336 - 1894 - 1895 Folding Rear Sight & Elevator - $170 3) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 4) Marlin Front Sight Ramp (1.0" C-C) with Screws  -  $85.00 5) Marlin 336 Front Sight Ramp - Sight Insert - (298") - $75 6) Marlin 336 Hood (1972 to Present Day) - $60 7) Marlin 336 Hood (pre 1972 Rifles) - $45 8) Marlin S-27 Rear Sight & Elevator  - $155 9) Marlin Rocky Mountain Rear Sight with Elevator - $295 10) Marlin Fishhook Elevator - $35 11) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45 12) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45 13) Marlin 336 - 1894 Rear Barrel Band Screw - $45 14) Marlin Bullseye Stock Inlay  -  $35.00 15) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 16) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 17) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

79243 impressions

2101 views

Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:Sporting GoodsGuns

29259 impressions

1135 views

1) Winchester Post 64 M94 - Rear Sporting Leaf Sight w/ Elevator - $170.00 2) Winchester Post 64 M94 - Elevator for Rear Sight - $50.00 3) Winchester Post 64 M94 - Front Sight Silver Beaded Insert - 80.00 4) Winchester Post 64 M94 - Front Sight Hood - $40.00 5) 6) Winchester Post 64 M94 - Finger Lever Pin Stop Screw - $40.00 7) Winchester Post 64 M94 - Link Pin Stop screw - $35.00 10) Winchester Post 64 M94 SRC Front Band Screw - 40.00 11) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 12) 6-48 Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

78916 impressions

2897 views

1) Remington 700 - 742 Rear Sight w/screws $135.00 . 2) Remington 700 Front Sight Ramp, Sight Insert, Hood & Screws $135.00 . 3) Remington 700 742 760 Early Front Sight Ramp, Sight Insert, Screws (no Hood Slot) $125.00 . 4) Remington 700 742 760 Early Rear Sight $135.00 . 5) Remington 701 Rear Sight $75.00 . 6) Remington 721 Rear Sight - $110.00 . 9) Remington Dovetailed Front Sights $75 - $85 . 12) Leopold Stainless Base and Rings - Remington 700 SA $95.00 . 14) 6-48 Filler Screws (4) - Blue - $20.00 . 15) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 . 16) 6-48 Filler Screws (4) - Stainless - $20.00 . 17) 8-40 Pan Head Filler Screws (2) - $20.00 . 18) 3/8" DT Filler - Curved Top - $45.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

103954 impressions

5403 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 . 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 . 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 . 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 . 6) Older Original 1A - 1B - 1C Elevators - $60.00 . 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 . 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 . 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 . 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 . Screws . 14) 6-48 Filler Screws (4) - Blue   $20.00 . 15) Win 1890-06-62 Tang Screw  - 40.00 . 16) Win 1894-1892-1873 PG Tang Screw - 60.00 . 17) Win 1876-1886 Tang Screw  -  40.00 . 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 . 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 . 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 . 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 . 24) Win 1894 (pre 64) Loading gate screw - 40.00 . 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 . 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 . 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 . 29) Win 1885 Low Wall Tang Screw - 40.00 . 30) Win 1885 High Wall Tang Screw - 40.00 . --- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

134596 impressions

7934 views

Brand new Non-restricted Caliber: .22LR Twist Rate:  1:16 in Magazine Capacity:  5 Magazine Type:  Detachable Stock: Turkish Walnut with Decorative Tip Thread:  1/2×20 UNF Sights: No Sights, Integral 11mm Dovetail Trigger: Adjustable Barrel Length:  20 in Full Length: 32 in Weight:  6.17lbs Trigger Mech:  Adjustable Safety:  Two-Position, Push-To-Fire Coming with: 1 magazine Made in CZ

categories:Sporting GoodsGuns

10490 impressions

661 views

1" 25.4mm Flat Top One Piece Dual Rings 11mm Dovetail Rail Mount for Rifle Scope

categories:Guns

5493 impressions

714 views