Very rare Remington model 1875 SAA in 44 Remington caliber. This revolver still retains about 75% of the original nickel two piece wood grips show typical ware but no chips or cracks. The action is very crisp and functions correctly with excellent timing and lock up., the bore shows typical black powder pitting, but lots of strong visible rifling This is an antique and you do not require a PAL to purchase this firearm. RCMP, FRT document included.

categories:GunsSporting Goods

45827 impressions

3169 views

Extremely rare Smith & Wesson No 3 chambered in 455 Eley with target sites and a 1-9/16 inch cylinder Was a special order. This revolver still retains about 75% of the original bluing it comes with a 7 1/2 inch barrel checkered walnut grips showing where but good condition no chips or cracks. The trigger set is amazing. This revolver is one of twelve ordered and shipped to Birmingham England in 1905, this revolver frame was produced prior to 1888 as documented and is considered an Antique status in Canada. Smith & Wesson factory letter included. PAL not required

categories:GunsSporting Goods

68403 impressions

4105 views

Very nice original condition Merwin and Hulbert seven shot revolver, this revolver is chambered in 32 H&R caliber. This revolver still retains over 95% of the original nickel finish, the two piece hard rubber grips are original and in excellent condition with no chips or cracks. it also features a folding hammer, and is in excellent mechanical condition with perfect timing and lock up. This is an antique and you do not require a PAL to purchase it. comes with RCMP,FRT document.

categories:GunsSporting Goods

21302 impressions

999 views

Brand new  Semi auto Non restricted Caliber: 12 gauge Capacity: 5+1 Chamber: 3" Barrel length: 18.5" Overall length: 40" Color: Black Operating System: ARGO Piston-Driven Sights: LPA Ghost Ring Rear, Adjustable Stock: Adjustable, Synthetic, Pistol Grip Choke: Modified Length of Pull: 14-3/8" Weight: 7.8 lbs. Part #: 11707 10 year manufacturer's warranty Made in Italy

categories:GunsSporting Goods

6668 impressions

340 views

1) Winchester M88 + M100 Folding Rear Sight   -  $100.00 2) Winchester M88 + M100  - Front Sight Insert  -  $75.00 3) Winchester M88 + M100  - Front Sight Hood  -  $40.00 4) Winchester M88 Original Sling Swivels  -  SOLD 5) Winchester Post 64 M88 Plastic Butt Plate - 5 x 1 5/8 - 3 3/8 C-C  -  $75.00 7) Winchester Pistol Grip Cap "W" Insert Only -  0.735" x 1.16"  - $65 8) Winchester Pistol Grip Cap Scroll Insert Only -   $30 9) 6-48 Filler Screws (4) - Blue   $20 10) 3/8" DT Filler - Curved Top - $45 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

76141 impressions

4431 views

1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 3) Win post 64 Model Front Sight Hood - Short (only) - $75.00 4) Win post 64 Model Front Sight Hood - Long (only) - $75.00 5) Win post 64 Pistol Grip Cap with Red "W" Insert - 0.735" x 1.16" - $100.00 6) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 7) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 22) Win 3C - 6 Step Elevator - $50 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 24) Win pre 64 M70 - Front Sight Insert - $75 25) Win pre 64 M70 - Front Sight Hood - $40 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

47575 impressions

899 views

Unfired, BNIB Henry Big Boy Brass (H006G) – chambered in .44 Magnum/.44 Special and rockin’ a 10+1‑round tube capacity. This polished‑brass receiver lever gun features a 20″ octagonal blued steel barrel, American walnut straight‑grip stock, and side‑loading gate for fast reloads. Sights are a fully adjustable semi‑buckhorn rear with diamond insert and a brass bead up front. It’s also drilled and tapped for easy optic mounting. Weighing 8.68 lbs, it’s the ideal blend of classic styling and modern usability. PAL required for the transfer and will be validated. No trades please and price is firm.

categories:GunsSporting Goods

29266 impressions

1422 views

Very nice fully functioning  double action 44 Russian revolver. The two piece hard rubber grips show  but no chips or   gun functions well both in single and double action. It has a 5 inch barrel. The  barrel shows light pitting but lots of strong visible rifling. This is an antique you do not require a PAL to purchase it but you must be over 18 years of age. RCMP, FRT document included.

categories:GunsSporting Goods

1369 impressions

198 views

Fierce Mountain reaper Ultra Lite Magnesium Chassis 1 Piece - Push Button Quick Lock System | Fold + Lock Stock Precision Machined - 2 Lug Action | 70 degree Bolt Throw Bix And Andy Trigger MDT Polymer Detachable Mag Box Carbon Fiber Folding + Adjustable Cheek Piece Carbon Fiber Forearm M-LOK, Ergonomic Pistol Grip, Cheekpiece Fierce C3 Carbon Fiber Barrel NIX Side Baffle Muzzle Brake 0 MOA Scope Rail Included. Excellent condition 150 round count. 1-9 twist 22” Barrel Scope not included

categories:GunsSporting Goods

787 impressions

108 views

WW1 Swiss Model 1914 Pioneer Sawback Sword bayonet Sawback sword bayonet for use on the 7.5 mm. Schmidt-Rubin M1911 carbine and the M1931 Short Rifle (K31). The M1914 has a swell-point blade profile, where the blade is wider at the point than at the ricasso. The 1914 blade is fullered on only one side. The right side of the blade has the initials HS stamped immediately in front of the guard for the Maker Hans Steimer With the Swiss proof mark stamped below the initials. The back of the blade has an aggressive saw blade which starts 1” in front of the guard and extends to 14” from the guard. The right side of the guard has the number 478681 stamped in it. The release button works as designed. The scabbard is in good condition with the original leather attachment strap included. This bayonet was manufactured by Paillard with their mark stamped on the end of the scabbard. Overall Length – with blade in scabbard - 25” Length of Bayonet – 23 7/8” Length of Grip including the Guard – 5” Blade Length – 19 3/4” The M1914 was issued to select troops. When equipped with K31 rifles, the M1914 bayonet was issued to: —Engineers; —Driver corporals and mounted artillery sergeants; —Blacksmiths, blacksmith private first class or lance corporal, blacksmith sergeants; —Horse transport soldiers, PFCs, corporals and sergeants; —Saddle makers; and, —Drivers for motorized field artillery, howitzers and heavy howitzers. Good Condition $400.00 Thanks, Phil

categories:GunsSporting Goods

7888 impressions

408 views

Original Brazilian Mauser M1908 WW1 Bayonet by W K & CIE Solingen Germany with Scabbard and Frog Used with the 7mm Brazilian Mauser Model 1908 The blade is marked W.K.&Cie Solingen. The Guard and Scabbard hook are stamped with matching serial numbers, M935. There is a B stamped on the left side of the pommel as well as on the back of the blade just in front of the guard. These are the Brazilian Inspector Proofs. The Release Button works as designed. Overall Length – with blade in scabbard - 17 ¾” Length of Grip including the Guard – 5 1/4” Blade Length –11 ¾” $250.00 Thanks, Phil

categories:GunsSporting Goods

9529 impressions

267 views

Winchester 450 Marlin unfired 16 1/2 inch barrel ported pistol grip and side hammer3500.00 faster velocity than 45,70 unfired.

categories:GunsSporting Goods

78218 impressions

5184 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6808 impressions

270 views

Howdy Townpost. This is a nice little and good conditioned pocket tip-up revolver, in .32 RF long. These were made by Marlin from 1875-1887 with a total of 33,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's some frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the hard rubber grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6025 impressions

211 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

6751 impressions

252 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5550 impressions

385 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6625 impressions

241 views

Ruger M77 Scout (.308 Win) – Compact, Powerful, and Versatile Great all-around rifle based on the scout-rifle idea—light, handy, and built to do pretty much any job. Chambered in .308 Win with a 10-round mag. Barrel is 5/8x24 threaded and comes with the flash suppressor. Has a solid stainless bolt, Mauser-style extractor, hammer-forged barrel, and a tough laminate stock. Peep sight in the back, post in the front. Just a reliable, easy-to-run rifle ready for hunting or whatever you throw at it. Features: The forward-mounted Picatinny rail allows for the mounting of modern optics, like an intermediate eye relief scope (not included), for "both eyes open" sighting and super-fast target acquisition. Also offers a built-in, accurate sighting system with ghost ring adjustable rear aperture sight and a non-glare, protected blade front sight. Detachable box magazine with push-forward magazine release just forward of the trigger guard. Patented integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy in the field (scope rings included). Soft rubber buttpad with buttpad spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear or defensive gear (three 1/2" spacers included). Free-floated, cold hammer-forged barrel with ultra-precise rifling that provides exceptional accuracy, longevity, and easy cleaning. Rugged and reliable with a glass-reinforced nylon trigger guard and magazine well. Non-rotating, Mauser-type controlled round feed extractor is the most positive case extraction system ever invented, and features a fixed blade-type ejector that positively ejects the empty cases as the bolt is moved fully rearward. Developed with Gunsite, this rifle is "Gunsite Approved" and features the Gunsite name rollmarked on the receiver and engraved on the grip cap of laminate stock models. Caliber: .308 Winchester Capacity: 10 Action: Bolt Stock: Black Laminate Barrel: 16.1", Free-Float, Cold Hammer-Forged, Threaded (5/8"-24) w/ Flash Suppressor Twist: 1:10" RH Safety: Manual Thumb Sights: Adjustable Rear, Protected Blade Front Overall Length: 37" Length of Pull: 12.75" Weight: 7.1 Selling some of my rifles to fund a long range pakcage in 300 wm, 308, 6.5cm and willing to trade accordingly. Shipping availalbe and on the buyer.

categories:GunsSporting Goods

2978 impressions

217 views

Brand new never fired gun in original box. Just out of box for taking pictures. Features Caliber: 7mm Remington Magnum Action: Bolt Capacity: 3+1 Finish: High Polished Blued Barrel: 24” Carbon Steel 1:9 25” Twist Length of Pull 13.5" Overall Length 44.5" Blind Internal Magazine X-Mark Pro Externally Adjustable Trigger Drilled and Tapped Receiver The rock-solid receiver is drilled and tapped for scope mounts and houses the externally adjustable X-Mark Pro Trigger 2 Position Safety Weight: 6.5 pounds C-Grade Walnut stock with Fleur de Lis Checkering & Hi-Gloss Finish Classic American Style Engraving and Gold Inlay Bronze Inlayed Commemorative Medallion Grip Cap Sling Swivel Studs Steel Floorplate Limited to Quantity of 2016 Special Serial Number New England Custom Sights Gun Custom Box Shipping and insurance available and on buyer. Open to trades with the same value

categories:GunsSporting Goods

46970 impressions

2065 views

1) Win post 64 Pistol Grip Cap with Red "W" Insert - $100.00 2) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 3) Win post 64 Pistol Grip Cap with Scroll Insert - $100.00 4) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

28530 impressions

615 views

Smith & Wesson new model double action no 3 .This revolver still retains about 75% of the original nickel finish comes with a very nice set of pearl grips showing a little bit of were but no chips or cracks. The action functions very well in single or double action with good timing and lock up  still  lots of strong visible rifle but minor typical black powder pitting, it has a 6 inch barrel chambered in 44 Russian caliber  as well as a long cylinder , 1-9/16” This is an  revolver and you do not require PAL to purchase it. RCMP, FRT documents included.

categories:GunsSporting Goods

1500 impressions

235 views