1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 . 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 . 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 . 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 . 6) Older Original 1A - 1B - 1C Elevators - $60.00 . 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 . 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 . 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 . 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 . Screws . 14) 6-48 Filler Screws (4) - Blue   $20.00 . 15) Win 1890-06-62 Tang Screw  - 40.00 . 16) Win 1894-1892-1873 PG Tang Screw - 60.00 . 17) Win 1876-1886 Tang Screw  -  40.00 . 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 . 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 . 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 . 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 . 24) Win 1894 (pre 64) Loading gate screw - 40.00 . 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 . 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 . 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 . 29) Win 1885 Low Wall Tang Screw - 40.00 . 30) Win 1885 High Wall Tang Screw - 40.00 . --- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

134600 impressions

7935 views

Selling off my neighbour's father’s rifles. Please message me or call, service is terrible but I’ll get back to you.7806798694 Local meet up in tofield preferred!   Winchester Model 70, 243 -sold  Winchester model 70, 22-250 -sold  Winchester model 12, 12 gauge -$450  Winchester model 61, 22lr -$1200  Remington 600, 222 -sold  Remington 574, 22lr -sold  Cooey 84, 12 gauge -$250  Cooey 84, 12 gauge-$250  Cooey 75, 22lr -sold  Cooey 60, 22lr -$350  Enfield Mark 3, 303 british -$400  Enfield Mark 3, 303 British -$400  Mossberg 352kb, 22lr -$425  Savage 3B, 22lr -$275  Savage 3C, 22lr -$250  Beretta A300, 12gauge -sold  Beretta BL-3, 12gauge -sold  Berscia AutoWing, 12gauge -sold 

categories:Sporting GoodsGuns

10202 impressions

2055 views

Excellent cond. c/w iron sites, rings and upgraded trigger Shipping included Cal- 243 Win Model- M77 Mark II Stainless

categories:Sporting GoodsGuns

4578 impressions

314 views

Hey, all! I am in search of a Remington 700, preferably chambered in: 7mm08, 6.5x55 or .30-06. Really anything less powerful than a .300 wm or 7mm mag. I would also prefer it to be pre-bankruptcy, (around 2006), and it needs to have a bottom metal, which the adl model lacks. If anyone has what im looking for, or very similar, like in .243 or something, we might be able to work something out. Please message me on either this website or my phone, 587 926 7510 . I am in Edmonton/devon area and am likely willing to make the drive. Also prefer to pay less than $1100. Thanks!

categories:Sporting GoodsGuns

15078 impressions

662 views

Deluxe INERTIA ACTION Model 1202 SEMI-AUTO12 gauge 3" magnum Slug Shotgun!!! Custom laminated wood stock, custom top picatinny scope ready rail, front and rear (adjustable) sights, front sight Red hi-vis fiber optic. Exceptional receiver finish and detailing! Brand new only 3 now available in Canada! Ships in 24 hours!!

categories:Sporting GoodsGuns

64731 impressions

1069 views

**Still available if posted** Detailed ad, please read before messaging.  Cross posted on GunPost with a Five Star rating and reviews.  Deal with confidence. Please include phone # and/or your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Browning X-Bolt Target McMillan A3-5 Ambush Rifle in 6.5 Creedmoor for sale. It’s a precision bolt-action target rifle in a Carbon Fiber McMillan A3-5 stock w/adjustable comb and with a stainless steel 26" fluted bull barrel with muzzle brake. Featured in Urban Carbon Ambush camouflage it’s got an 60 degrees bolt throw with an extended bolt handle, an adjustable feather trigger, 4 rd detachable clip, Pachmayr Decelerator recoil pad, 20 MOA Picatinny optics rail and bipod rail. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. 
Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Browning X-Bolt Target McMillan A3-5 Ambush Rifle, 6.5 Creedmoor. Made to the high standards you expect from Browning, this quality X-Bolt Target McMillan A3-5 Ambush Rifle is chambered in 6.5 Creedmoor and comes equiped with numerous features. These features include the Carbon Fiber McMillan A3-5 stock with an ajustable comb, a free-floating fluted barrel with a muzzle brake on 5/8-24 suppressor threads, picatinny rail for bipod mounting, a gray stainless steel 26" bull barrel, an adjustable feather trigger, detachable rotary magazine, a urban carbon ambush finish and more. Included with this bolt action rifle is two quick detach swivel cups, a 20 MOA picatinny rail, and a glass bedded receiver with a matte blued finish. The McMillan A3-5 stocks are US Marine proven tough, and are proudly featured on these X-Bolt models. PRODUCT FEATURES - Carbon Fiber McMillan A3-5 Stock Marine proven tough, this premium Carbon Fiber stock comes with an installed adjustable comb, textured gripping surfaces, palm swell, a Pachmayr Decelerator recoil pad, and finished in an Urban Carbon Ambush. This stock is a variation of McMillan's famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock comes with a thumbwheel elevator system which allows for precise vertical adjustments. With the adjustable comb you can adjust and align your sight plane to match the scope - Decked out 26" Long Bull Barrel Manufactured from gray stainless steel, this free-floating fluted barrel includes a muzzle brake on 5/8-24 suppressor threads, a thread protector, and an embedded target crown - Extended Bolt Handle, Feather Trigger, and 20 MOA Picatinny Rail This ambush rifle includes a steel constructed, glass bedded receiver that features a matte blued finish, a 60 degrees bolt lift with an extended bolt handle, an adjustable feather trigger, detachable rotary magazine, top tang safety, and bolt unlock button. The X-Bolt's three-lever gold plated Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. Attaching the ideal scope or accessory is easy with the aluminum manufactured 20 MOA Picatinny rail as well attaching a bipod or light to the included bottom rail SPECIFICATIONS Model Code - 035451282 Action Length - Short Action Barrel Length - 26" Overall Length - 46" Length of Pull - 13 5/8" Weight - 10 lbs 0 oz Magazine Capacity - 4 Twist Rate - 7" Barrel Finish - Satin Gray Stock Finish - Urban Carbon Ambush Receiver Finish - Matte Blued Chamber Finish - Polished Barrel Material - Stainless Barrel Contour - Bull Stock Material - Carbon Fiber Recoil Pad - Pachmayr Decelerator Checkering - Textured Grip Panels Sling Swivel Studs - 2 QD Cups Receiver Material - Steel Trigger Finish - Gold Plated Bolt Slide Finish - High Gloss Magazine Type - Detachable Trigger Material - Alloy

categories:Sporting GoodsGuns

32995 impressions

1200 views

Replace cracked, missing, and worn grips or safeguard your minty originals by swapping to a new pair that you're ok with taking a beating in the field. I am selling reproduction revolver grips for models of revolvers/handguns including antique and modern and can source plenty more if interested. I also have holsters for antiques available! Check my ads for more. Antiques were made before CNC machining, meaning there can be slight variation between different examples of the same model. Grips may be slightly oversize allowing them to be ground down to size, slightly undersize, or require minor adjustment of the interior face or grip peg hole to fit just the way you want. I can also get plenty of butt plates for shotguns and rifles. Inquire to see if I can help you. Also reach out if you need a leather holster to protect your revolver. Price starts at $100 per grip pair with shipping anywhere in Canada, discounts for bulk order possible. Current stock includes: Colt 1873 Single Action Army / Peacemaker ivory-like Colt 1877 Thunderer/Lightning .41 Colt SAA faux bison White & Black Webley Mark 1 (Mk I) for .455, .45 ACP, and .45 auto rim service revolver White & Black Webley Mark 2, Mark 3, Mark 4, Mark 5 (Mk II, Mk III, Mk IV, Mk V) for .455, .45 ACP, and .45 Auto rim service revolvers Smith & Wesson No. 3 New Model for .44 single action revolvers Smith & Wesson No. 3 Russian ivory-like for .44 Russian single action revolvers Smith & Wesson DA .44 I can source most grips and butt plates for makes of pistols and long guns such as Beretta, Benelli, CZ, Colt, Forehand & Wadsworth, Harrington & Richardson (H&R), Hopkins & Allen, Ithaca, Iver Johnson, Luger, Marlin, Mauser, Pietta, Remington, Ruger, Springfield, Savage, Sig Sauer, Smith & Wesson, Stevens, Tokarev, Uberti, Walther, Webley, and more.

categories:Sporting GoodsGuns

47933 impressions

918 views

Winchester Lever Action Repeating Rifle, .38-40 WCF, mfg. 1890. This is a good honest original ‘73 fresh out of a very old local collection. Standard length 24" octagon barrel retains it’s original dovetailed blade front sight and adjustable buckhorn rear. The metal has a mottled dark gray patina overall with some traces of original bluing remaining within protected areas around the sideplates, trigger, and along the dust cover rail. Sharp edges with generally smooth surfaces throughout. Some very light surface oxidation spotting forming toward the muzzle. The stock retains about 40% factory varnish with the balance worn to a pleasing dark untouched patina. Tight wood-to-metal fit with moderate wear overall and a just really honest, unmolested appearance. There is some very minor chipping along the edges of the butt and a super tight old 1" hairline crack at the front left side of the forearm. Original hammer, trigger, lever & locking nut, loading gate, dust cover, buttplate with trapdoor compartment (cleaning rod absent), forend cap, and magazine tube & band. Screws appear to be original. Crystal clear original barrel address, caliber marking, model designation, and serial number "336159" on lower tang. Action is very smooth, crisp, and secure and functions perfectly. Rifling is worn and pitted at the very tip of the muzzle but otherwise the bore shows good rifling overall with moderate/heavy blackpowder frosting and pinprick pitting scattered throughout. A very solid original '73 Winchester with a great Western look..

categories:Sporting GoodsGuns

8530 impressions

226 views

Remington 783 .308 win, 24" medium profile barrel, black cerakote finish barrel and action, flat dark earth color stock, it comes with a Vector Optics Scope, a picatinny rail, and scope rings. The scope is a Vector Optics Atlas 5-30x56 SFP Long Range Riflescope 35mm Tube, 1/8MOA illuminated, Elevation Range: 85MOA,Windage Range:85 MOA German HD Schott glass. Specification Model: Remington 783 Action: Bolt Magazine Type: Detachable Stock Type: Fixed Trigger Type: CrossFire Muzzle Type: Threaded Magazine Capacity: 4 Caliber/Gauge: 308 Winchester Twist Rate: 1:10″ Receiver Material: Steel Stock Material: Synthetic Barrel Finish: Matte Blue Stock Finish: Flat Dark Earth Barrel Length: 24″ Length of Pull: 13-3/8″ Overall Length: 43-5/8″ Weight: 7 lb Drop at Comb: 1″ Drop at Heel: 1-5/8″ Barrel Type: Medium Profile Button-Rifled To purchase this rifle, must comply with the law, I am required by law to see two pieces of ID: possession of firearms license and a piece of ID. I do offer shipping Canada-wide at the buyer's expense.

categories:Sporting GoodsGuns

81437 impressions

3114 views

A Stevens model 58-12 gauge from Savage arms and is bolt action. From the 1960s, 2 3/4 inch and Full choke. Comes with a 2 rds mag that has been repaired (someone stepped on it a long time ago). Has hardly ever fired, been sitting in a safe for 4 decades. Bore and action is exellent. Not sure if it was converted from a Mauser Ger98 or just based on it. This thing will never let you down, however it is very long. Perfect for an antique collection or for going straight to duck hunting. PAL is a must. Best to text me or msg throught the site.

categories:Sporting GoodsGuns

13687 impressions

531 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 . 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 . 4) Cooey Elevator - .075" x 1.21" - $15 . 5) Husqvarna Elevator - $45 . 6) Marble Double Step - Rifle Elevator - $35 . 7) Marble Double Step - Carbine Elevator - $35 . 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 . 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 . 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD . 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 . 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD . 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 . 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD . 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 . 17) Savage Fishhook Elevator - $40 . 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD . 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 . 21) Savage 24 Elevator (Replacement Style) - SOLD . 22) Win Early Elevator - $40 . 23) Winchester 1A Elevator - dated (.207") - $60 . 24) Winchester 1B Elevator - dated (.162") - $60 . 25) Winchester 1C Elevator - no date (.175") - $60 . 28) Win 2C Elevator - .60"W x 1.625"L - $35 . 29) Winchester 3C - 6S Elevator - $50 . - . 31) 6-48 Filler Screws (4) - Blue $20.00 . 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 . 33) 6-48 Filler Screws (4) - Stainless $20.00 . 34) 8-40 Pan Head Filler Screws (2) $20.00 . 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 . 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 . - . 40) Husqvarna Front Sight Hood - $85 . 41) Marlin pre 72 Round Front Sight Hood - $45 . 42) Marlin post 72 Front Sight Hood - $60 . 43) Sako - Finnwolf Hood - $85 . 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD . 45) Parker Hale Front Sight Hood - $85 . 46) Browning (Belgium) Safari Front Sight Hood - $85 . 47) Winchester Model 9422 Front Sight Hood - $40 . 48) Winchester post 64 Model 94 Front Sight Hood - $40 . 49) Winchester pre 64 Model 94 Front Sight Hood - $40 . 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 . 51) Winchester post 64 Model 70 Front Sight Hood - $75 . 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 . 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

229367 impressions

3021 views

Beretta BRX1, 300 Win Mag, Upgraded with a vertical grip & factory muzzle break. Make: Beretta Model: BRX1 Calibre 300 Win Mag Action Type: Bolt Action Straight pull Shooting Type: Hunting Handedness: Right/ Left-Handed Barrel Length: 24" Magazine Capacity: 5 Rounds Looking to trade for a 7 MM or 7 PRC of equal value & MUST BE left-handed bolt I may trade up or down depending on what you have!! $1800.00 Trade value or $1600 cash... If you have ammo we can trade that as well I have 3 or 4 box's or i can sell you the ammo at a discount rate!! https://www.youtube.com/watch?v=0-SUoekPOuc

categories:Sporting GoodsGuns

2171 impressions

97 views

Brand new Manufacturer: Ruger Caliber: 243, 308, 6.5 CREED, 6MM CREED, 7MM-08 Capacity: 4 Rounds Material: Polymer Type : Detachable Model Fit: Ruger American Rifle Made in USA

categories:Sporting GoodsGuns

8519 impressions

446 views

By Hunter model 158 Small 24 to 28 inch waste Good Shape. Brown color More info please e-mail me thanks.

categories:Sporting GoodsGuns

16848 impressions

1942 views

1) Remington No. 701 Rear Sight w/ Elevator $75.00 6) Remington Dovetailed Front Sights $75 - $85 7) 6-48 Filler Screws (4) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 9) 6-48 Filler Screws (4) - Stainless - $20.00 10) 8-40 Pan Head Filler Screws (2) - $20.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

24813 impressions

555 views

1) Remington 600 Rear Sight, Plastic Base, & Screws (w/o Vent Rib)  -  $145.00 . 2) Remington 600 Rear Sight & Screws (w/ Vent Rib - No Plastic Base)  -  $135.00 . 3) Remington 788 Rear Sight, Plastic Base, & Screws   -  $145.00 . 4) Remington 788 Front Sight, & Screw   -  $45.00 . 5) Remington 581 Rear Sight w/ Screws   -  $135.00 . 14) 6-48 Filler Screws (4) - Blue  -  $20.00 . 15) 6-48 Pan Head Filler Screws (4) - Blue  -  $20.00 . 16) 6-48 Filler Screws (4) - Stainless  -  $20.00 . 17) 8-40 Pan Head Filler Screws (2)  -  $20.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com

categories:Sporting GoodsGuns

47836 impressions

1324 views

1) Win 9422 - Rear Sight w/ 3C Elevator - $170.00 2) Win 9422 - Front Sight Insert - $85.00 3) Win 9422 - Front Sight Hood - $40.00 4) Win 9422 - 3C Elevator - $50.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

19679 impressions

362 views

1) Winchester 40A Rear Sight - (M1903) - U Notch - (80%) - $90.00 2) Winchester 40A Rear Sight - (M1903) - U Notch - (95%) - $120.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

16732 impressions

365 views

1) Winchester Post 64 M94 - Rear Sporting Leaf Sight w/ Elevator - $170.00 2) Winchester Post 64 M94 - Elevator for Rear Sight - $50.00 3) Winchester Post 64 M94 - Front Sight Silver Beaded Insert - 80.00 4) Winchester Post 64 M94 - Front Sight Hood - $40.00 5) 6) Winchester Post 64 M94 - Finger Lever Pin Stop Screw - $40.00 7) Winchester Post 64 M94 - Link Pin Stop screw - $35.00 10) Winchester Post 64 M94 SRC Front Band Screw - 40.00 11) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 12) 6-48 Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

78921 impressions

2898 views

1) Winchester M88 + M100 Folding Rear Sight   -  $100.00 . 2) Winchester M88 + M100  - Front Sight Insert  -  $75.00 . 3) Winchester M88 + M100  - Front Sight Hood  -  $40.00 . 8) Winchester Pistol Grip Cap Scroll Insert Only -   $25.00 . 9) 6-48 Filler Screws (4) - Blue   $20 . 10) 3/8" DT Filler - Curved Top - $45 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

87073 impressions

4605 views

Excellent condition older model

categories:Sporting GoodsGuns

2815 impressions

333 views