NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:Sporting GoodsGuns

226998 impressions

18176 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6261 impressions

614 views

Have 2 Winchester 94 Big Bore’s in 375win and 2 Chiappa 92’s one in 357mag and one in 44mag 1 Box of ammo for each gun included

categories:Sporting GoodsGuns

17837 impressions

2273 views

Selling off extras, Earlier in the year I had made a 50Beowulf (12.7x42mm) rifle on the SrV2 Siberian platform, works Spectacular! and in doing so I also had 3 extra barrels made up at the same time to spread the love of the Big bore. these are more or less a "Complete" Calibre change for your AR type rifle, as the barrels include a 5rd Beowulf Mag w/ the proper follower. They are head spaced for a Grendel (Type 2) AR Bolt (7.62x39 AR bolts are "Type 1" and are NOT compatible) $500 for the (x1) 8" model  $525 for the (x2) 12.5" model they are all threaded 3/4x24tpi & .875" Gas block Diameter (Pistol for 8" and Carbine for 12.5") Gas port is NOT DRILLED (for use also in the PAR / SAR / MDI and other Non-Semi AR-type rifles) All it takes to be used in a Semi is to drill the Gas port (best to see a proper gunsmith about it) $75 for the Radial Door breacher As of Sept 1 I believe these will require the eyebawlz to look over a valid Pal, No pal or Unwilling to provide one will result in No Sale, Deposits are NON-Refundable & are valid for 14 days. Shipping is on the buyer. 

categories:Sporting GoodsGuns

8135 impressions

834 views

Cooey 39 (winchester Canada) in great shape and works as it should. Nobel Model 200 is more of parts gun but works as it should. Bolt lever has been welded. See photos closely.  Rifling good on both.  Price is firm.   Please use cell phone text messaging." 403 556 0086 Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:Sporting GoodsGuns

5189 impressions

358 views

HAD A STROKE AND MOVING CLOSE TO KIDS. 1980 BOXFORD MODEL 330 IS 13X40, 1/12 BORE, 3PHASE 220VOLT (PHASE CONVERTER INCLUDED) 2.5/1.75HP 2SP MOTOR,30-3000 RPM, ELECTROMAGNETIC BRAKE, CHANGE GEARS FOR 31/2-128 TPI (.2-7MM),TAPER ATTACHMENT, COOLANT PUMP, 4-JAW PRATT BURNERD CHUCK, 3 JAW PRATT BURNERD,6 TOOL HOLDERS DREHBLITZ 7.5 DEGREES ADJUSTMENT, 10'' FACEPLATE, STEADY REST,MISC TOOL ACCS. $45,000.00 #1 MILLING MACHINE,R8 SPINDLE, USED FOR MOSTLY FLUTEING BARRELS, 220-3400RPM, PULLEYS, 1''X 8"X 36'' ALUMINUM TABLE EXT., 20'' TABLE TRAVEL,SERVO POWER FEED,TILT HEAD 45 DEG., SWIVEL HEAD, $15,000. LARGE TOOL BOX WITH INSERTS, DRILL BITS & MISC.MEASURING INSTRUTMENTS. $3000.00. RIFLE BARREL CART WITH MISC TAKE OFFS, $1000.00 #2 MILL IS A CRAFTEX 601, 33 X 81/2 TABLE, CUSTOM STAND FOR COOLANT,DC VARIABLE SPEED, 50-2300RPM, 110VOLT- 12AMP, 4"HOLME VISE, 6'' DIVIDING HEAD, R8 SPINDLE, $8000.00. GUN RACK FOR STANDING GUNS, 2- 6'' GRINDERS'. WORK BENCH WITH VICE & BBL VICE, $3000.00. MISC. JIGS AND FIXTURES, DRILL PRESS WITH HEAVY STAND MADE WITH VICE AND 2 TON ARBOUR PRESS, $1000.00 BALDOR 10" BUFFER WITH STAND, POLISHING GRIT, WHEELS, $2000.00-4 BLUING TANKS WITH STAND AND SOME RUST BLUE, $1000.00 8"BANDSAW LIKE NEW, $750.00. BLASTING CABINET IS SILICONE SEALED FOR INDOOR USE, ALO GRIT, NEEDS A VACUM, $1000.00 3 MONTHS OF TRAINING WITH MACHINES(I HAVE LOTS OF WORK)$10.000 MONTH IF NEEDED.

categories:Sporting GoodsGuns

7030 impressions

524 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

23714 impressions

840 views

Both are made in Brazil, both are fixed full and mod chokes. Several wood only dings in both but no cracks and very little metal wear showing a very low round count. No issues. Selling both at once. 28" is a Condor 1. by IGA What a nice Christmas Gift .... get your buddy into trap shooting over the winter ...  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

16610 impressions

718 views

For Sale Rare Tikka Over and Under Combination Gun 12 Ga 2 3/4 and 222 Rem Good condition Nice mirror bore in 12 Ga, Great rifling in 222 Rem bore.

categories:Sporting GoodsGuns

13086 impressions

1027 views

Feyachi 12 ga. Bore Sighter Solid Brass

categories:Sporting GoodsGuns

25576 impressions

2112 views

Selling older Winchester Model 88 hunting rifle in very good condition. Made in U.S.A., lever action, caliber 308. Wooden stock, leather sling. Bushnell Scope Chief VI 3-9x40 scope attached on the rifle. Additional items that will be sold with the firearm are: bore snake for 308 caliber, bore snake for 12 gauge shotgun, gun cleaning kit, hard case that holds one rifle, two magazines (capacity 5 rounds), gun safe that holds five rifles, bench rest, shooting rest monopod, trigger lock, cable lock. All for $2,100.00.

categories:Sporting GoodsGuns

25421 impressions

1978 views

Type: Air Rifle / Machine Gun. Distributer: Umarex Model: Legends M1A1. Materials: Mostly Metal build. Weight: 7.75 pounds (3.5 kilograms) Barrel: 12 inches – smooth bore steel. Propulsion: 2×12 gram CO2. Action: Internal BoltBlowback single action. Ammunition Type: 4.5mm Steel BB’s. Ammunition Capacity: 30 round full size drop out magazine. Max FPS: 435.

categories:Guns

17444 impressions

1635 views

Early Stevens 44 1/2. Rare rifle in 22 LR. All original finish. Bore is good with a little pitting. Beefed up proper falling block that was built for target work most common in 32-40 and up to 38-55. 24” barrel. Action works great with impressive ejection of an empty case. CPA makes centerfire blocks that will interchange with this rifle if you wanted to build it. Or enjoy it as is. Marbles rear sight. $2000 or trades: Savage 1920/26 in 300 Single shot in 32-20 Pre war Mauser 7x57 or 7x64

categories:Sporting GoodsGuns

3568 impressions

270 views

Brand New Beretta A400 Extreme+ Semi-Automatic 12 Gauge 28” barrel Never fired Comes with Optima Bore HP Extended chokes ***$2200 plus shipping if needed***

categories:Sporting GoodsGuns

2407 impressions

230 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 6+1 Barrel length: 18.5" Cylinder Bore Heavy-Walled Barrel Sight: Bead Sight LOP Type: Fixed LOP: 13.87" Stock Finish: Synthetic (Black) Full Length: 39.5" Made in USA

categories:Sporting GoodsGuns

10104 impressions

819 views

Brand New Non Restricted Gauge: 12 Gauge Action: Pump Chamber: 2-3/4" or 3" Capacity: 6+1 Sights: Magpul MBUS 3 Adj Sights Barrel Length: 18.5" Choke: Accu-Choke System - Cylinder Bore Choke Installed Barrel Type: Phosphate / Integrated Heat Shield Stock: 5-Pos Adj Stock w/Interchangeable Pad, MOE Pistol Grip, Compact Forend (Black) Overall Length: 36.25" Length of Pull: 12"-15.25" Weight: 7.1 lbs. Part #: 50762 Made in USA

categories:Sporting GoodsGuns

1526 impressions

80 views

made in Bresica Italy custom made high quality SXS 12 GA 23/4 chambers Barrel length 28 -1/4" barrels are demi block construction Right Barrel -Improved Modified Left Barrel - modified Box lock Action, silver scalloped Scroll English - straight grip rear stock Anson and Deely - splinter Forend All Word - extra Fancy select european Extra Fine Line checkering Rear stock hgfyle stght rigbt hans Goregeous custom Linen Leather and Green Case Automatic Ejectors Doube Triggers Rear stock Red Pachmayer Pad Length of Pull - 14/" Weight- 7lbs Push button - tang safety Serial # 80720 Very High End - Superb collector  Perfect Bores Engraved , Boxlock Luchini shutguns are $8700.00 Euros Can ship anywhere in Canada. Please see my other adds for rare and collectable firearms. 

categories:Sporting GoodsGuns

3204 impressions

130 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 2.75" Capacity: 10+1 Barrel Type: Integrated Heat Shield Barrel Length: 18.5″ Barrel Finish: Phosphate Choke: Accu-Choke System – Cylinder Bore Choke Installed Overall Length: 36.9″ Length of Pull (LOP): 12″–15.25″ LOP Type: Adjustable Sights: Magpul MBUS 3 Adjustable Sights Stock: 5-Position Adjustable Stock w/ Interchangeable Pad, MOE Pistol Grip, Compact Forend (Black) Trigger: Flat Profile Safety: Rotary Safety Selector Weight: 8 lbs Made in USA

categories:Sporting GoodsGuns

2806 impressions

153 views

Brand New Color in FDE, OD green Non Restricted Action: Pump Caliber: 12 Gauge Chamber: 3″ Barrel Length: 18.5″ Overall Length: 26.1″ Weight: 5.9 lbs Capacity: 7+1 (2.75″ shells) Stock: Polymer Bullpup Receiver: Top Picatinny Rail Choke: Cylinder Bore Safety: Manual Cross-Bolt Butt Plate: Soft Rubber Butt Pad

categories:Sporting GoodsGuns

3154 impressions

272 views

Brand new Pump action Non restricted Gauge: 12 Gauge Chamber: 2-3/4" or 3" Capacity: 4+1 Barrel Length: 20" Barrel Type: Cylinder Bore Sights: Rifle sights Stock: Synthetic Length of Pull: 14″ Weight: 7.5 lbs. Made in USA

categories:Sporting GoodsGuns

9411 impressions

333 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 5+1 Barrel length: 18.5" Overall length: 28.125" Weight: 5.5 lb Metal Finish : Matte Blued Sights :Bead Front Cylinder Bore Made in USA

categories:Sporting GoodsGuns

9956 impressions

423 views