🔭 Scope Details: Model: Vortex Crossfire II 3-9x40 (V-Plex Reticle) Condition: Installed less than a year ago, purchased from The Shooting Centre on October 28, 2024. Features: Magnification: 3-9x Objective Lens Diameter: 40 mm Tube Size: 1 inch Field of View (at 100 yards): 34.1 - 12.6 ft Parallax Setting: 100 yards Fully multi-coated lenses for excellent light transmission Waterproof, fogproof, and shockproof Fast focus eyepiece Lifetime Vortex VIP Warranty 🔩 Ring Details: Model: Vortex Optics Pro Series Rings (1" Low, 0.75" / 19 mm) Condition: Excellent, installed with the scope, includes original screws and Torx key Material: 7075-T6 aircraft-grade aluminum Mount Type: Compatible with Weaver and Picatinny rails Made in the USA Torque Specs: Base: 30 in/lbs Ring screws: 18 in/lbs 💰 Price: Complete Set: $368 CAD Scope Only: $249 CAD Rings Only: $119 CAD 📍 Location: Calgary, Alberta Local pickup preferred, but shipping within Canada is possible at buyer's expense.

categories:Sporting GoodsGuns

3407 impressions

610 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2951 impressions

493 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

5595 impressions

438 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

8597 impressions

609 views

Brand new The Magpul Barricade Stop is a rugged hand stop that allows the shooter to brace their firearm off barricades or field expedient shooting rests to create a stable platform for more accurate shots. The Barricade Stop is constructed of a polymer body that’s fit with a hardened, QPQ-treated steel plate insert. The steel plate is heavily textured for aggressive contact with your shooting rest. It’s also slightly curved for optimized contact on uneven surfaces, giving you the ability to pivot your firearm while maintaining contact and control. Compatible with octagonal M-LOK Handguards. Made in USA

categories:Sporting GoodsGuns

1597 impressions

371 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

6143 impressions

558 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2742 impressions

406 views

Brand new Matching a wide zoom range with a bright objective lens and a reticle rich in hold points, the Riton Optics 5-25×50 X5 Conquer MRAD Riflescope is a versatile optic for serious hunters and shooters. This one-piece aluminum scope features a first focal plane, Christmas tree-style illuminated PSR reticle and MRAD-based turrets for dialing in precise elevation and windage adjustments. The large objective lens admits enough light for good vision even in low-light conditions, and the sight picture is sharp and clear through HD glass and multiple layers of anti-reflective coating. Riton’s R5 zero stop turrets adjust impact point at 1/10 MRAD, with a 21 MRAD total adjustment range. Zooming is effortless with the removable throw lever, and the fast-focus eyepiece makes it easy to sharpen your view of the reticle. The X5 Conquer is waterproof, nitrogen-purged fogproof, and tested to withstand 1200 Gs of recoil. 5-25x zoom magnification 50mm objective diameter Fully multi-coated HD glass 22.5-4.5′ field of view at 100 yards First focal plane Christmas tree style Red illuminated with six brightness levels and off settings in between 1/10 MRAD per click impact point correction 21 MRAD elevation and windage adjustment ranges Side-focus parallax adjustment, 10 yards to infinity 3.7″ eye relief 34mm maintube One-piece CNC-machined aluminum housing Type III hard anodized matte black finish Exposed zero-stop turrets Fast focus eyepiece with knurled zoom ring and removable zoom ring throw lever Nitrogen purged, fogproof and waterproof

categories:Sporting GoodsGuns

3590 impressions

534 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2774 impressions

489 views

Brand new Scope Weight: 21.3 oz (603 g) Scope Length: 10.63″ (270 mm) Magnification Range: 1-10x Scope Objective Diameter: 28mm Scope Tube Size / Mount: 34mm Reticle Position: First focal plane Field of View:100 Yards – 1X: 116.6 ft (35.5 m) – 10X: 11.7 ft (3.6 m) Eye Relief: 1X: 3.27-3.90″ (83-99 mm) – 10X: 3.35-3.62″ (85-92 mm) Made in USA

categories:Sporting GoodsGuns

3935 impressions

538 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4192 impressions

485 views

Brand new Magnification: 4x Objective Lens Diameter: 32 mm Field of View: 36.8' @ 100 yd / 12.2 m @ 100 m Exit Pupil Diameter: 8 mm Eye Relief: 1.5" / 38 mm Diopter Correction: None Impact Point Correction: 1/3 MOA per Click Windage Adjustment: 40 MOA Elevation Adjustment: 40 MOA Water Resistant Dimensions Length: 5.8" / 14.7 cm Weight: 14.9 oz / 422 g (without Mount) Made in USA

categories:Sporting GoodsGuns

12924 impressions

1500 views

The gun is perfect no marks no scratches like new fired maybe a box of ammo in its lifetime. No trades and the price is firm. Must have a pal

categories:Sporting GoodsGuns

1341 impressions

73 views

This item is new and has already been reduced by 25%. As a result, price is firm. No discounts. No trades. Cash only. Must pick up from northeast edmonton off manning drive and 153ave nw. If you live out of town and need it to be shipped, we can discuss that. You'd be responsible for shipping cost. If you are interested in seeing all that I have for sale please search here in townpost for "mellonRSCA". Thank you

categories:Sporting GoodsGuns

854 impressions

213 views

Bought from Cabela's May 2022, never fired and still have box. Purchased thinking for using it on white-tail and mule deers on fields up north, but always grabbed my 300 wby instead. Weatherby says its sub-moa but I haven't get a chance to verify it of course. Rifle weights 7.5 lbs, 26'' Barrel, hinged floorplate (no detach magazine) holds 5+1. Selling without scope, rings, and bases. Please text 780.710.3905 for more information, located southwest Edmonton.

categories:Sporting GoodsGuns

12115 impressions

1520 views

Lightly used 88. Less than 50 rounds shot. Less than desirable paint job. Will include 25 buckshot, 9 #7.5 shot and 12 #2 shot all in 2.75" Text only please

categories:Sporting GoodsGuns

6875 impressions

839 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 5+1 Barrel Type: Vent Rib Barrel Length: 28″ Sight/Base: Dual Bead Choke Accu-Set LOP: 13.875″ Barrel Finish: Matte Blued Stock Finish: Synthetic (Black) Weight: 7.5 lbs Full Length: 47.5″ Made in USA

categories:Sporting GoodsGuns

8600 impressions

685 views

New in box 300 Win Weatherby Meateater series in a 26" barrel. 3+1 Mag capacity. 7.15 pounds. 1:10" Twist Rate. Lightweight and effective The Vanguard MeatEater Edition is the culmination of in-field experience, trends, and MeatEater’s personal touches rolled into a collaboration between two top brands in the outdoor industry. Full Tungsten Cerakote® finish on barreled action to prevent corrosion while accenting the spiral fluted #2 contour barrel. Lightweight and effective, the Vanguard MeatEater Edition features a unique color pattern that highlights the current trends of gray and brown accents on a black stock base. The black Cerakote® fluted bolt matches the MeatEater logo located on the floorplate. The 1/2x28tpi threaded barrel with included seamless thread protector gives options for future Accubrake ST or suppressor installation.

categories:Sporting GoodsGuns

10032 impressions

671 views