1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 3) Win post 64 Model Front Sight Hood - Short (only) - $75.00 4) Win post 64 Model Front Sight Hood - Long (only) - $75.00 5) Win post 64 Pistol Grip Cap with Red "W" Insert - 0.735" x 1.16" - $100.00 6) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 7) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 22) Win 3C - 6 Step Elevator - $50 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 24) Win pre 64 M70 - Front Sight Insert - $75 25) Win pre 64 M70 - Front Sight Hood - $40 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

52699 impressions

992 views

Just got in 454 Casul Rossi M92 carbines stainless steel .NEW holds nine rounds.will shoot a 300 gr. Bullet at 2000 fps. 20% more power than 44 magnum. you can also use 45 long, colt ammunition. all fire I’m 15% off all ammunition 20% off.

categories:GunsSporting Goods

70387 impressions

5279 views

peep site 65.00 pin for long rail 12.00

categories:GunsSporting Goods

88312 impressions

5345 views

Lightly used Savage BVSS Varmint Hunter in 308 Win. More of a bench shooter than a long distance gopher gun but quite a nail driver. All Stainless Steel with the AccuTrigger & a heavy laminated stock. Some light scuffing to the laminated stock from the previous owner but its basically scuffed varnish. $1250 plus shipping but I would prefer a local (Edmonton Area) sale.

categories:GunsSporting Goods

7671 impressions

449 views

Redding 45 colt (long colt) dies 454 casull dies Pick up nw Calgary Text is best

categories:GunsSporting Goods

25856 impressions

636 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

195455 impressions

2755 views

1) Marble's Rifle Flat Top - High  FTH-4 - $145.00 . 2) Marble's Rifle Flat Top - High  FTH-1 - $145.00 . 3) Marble's Rifle Flat Top - High  FTH-2 - $110.00 . 4) Marble's Rifle Flat Top - Low   FTL-1 - $125.00 . --- . 6) Marble's Rifle Full Buckhorn  FB-1    -    $175.00 . 7) Marble Rifle - SBH - High & Elevator    SBH-4     -    $125.00 . 8) Marble Rifle - SBH - High & Elevator    SBH-5     -    $125.00 . 9) Marble Rifle - SBH - High & Elevator    SBH-6     -    $125.00 . --- . 10) Marble's Carbine Full Buckhorn  CFB-1 - $185.00 . 11) Marble's 95  Carbine Folding  MC95-1    - $175.00 . 12) Marble's Carbine Semi-Buckhorn  CSB-4  - $145.00 . 13) Marble Carbine - Flat Top MCFT - 1 - $135.00 . --- . 16) Marbles 69 Folding Rear Sight - Semi Buckhorn - .505" H . 18) Marbles 69 Folding Rear Sight - Semi Buckhorn - .516" H . --- . 20) Marble Rifle Sight Elevator (Long)  -  $25.00 . 21) Marble Carbine Sight Elevator (short)  -  $25.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

44346 impressions

1635 views

Suzuki samurai/toyota rock crawler 22re motor and 5 speed toyota trans Twin stick t-case 4:74 ratio Toyota truck axles 5:29 ratio, rear spool locker and a limited slip (lunch box) locker in the front Full coil suspension (fox shock/spring packs) Custom Long arm 4 link Diffs are armored Full Skid plates Full PSC hydraulic steering (steer the thing with one finger) Aluminum radiator Electric fans 41.5" pitbull tires on beadlocks Racing seats with 5 point harnesses Under glow Light bar Full roll cage New diff bearings New wheel bearings and seals This rig is unstoppable, quads couldn't dream of following you. Fun rig ready to crawl. Cash $15500 or $20,000 trade value Trades for muscle cars (Mopar or Chev), jet boat, heavy equipment, trucks etc. If you need your wife's, girlfriend, shrink or bosses permission to buy this please get it before contacting me! I'm happy to talk about the rig and answer any questions, but I have no time for time wasters

categories:GunsSporting Goods

1751 impressions

189 views

Clearing out the following mags..... CZ 452 17 HMR 10 round, NEW $45.00 CZ 512 22LR, 25 round, have 2 $35.00 each Ruger 77 22LR $30.00 Ruger 77 22mag/17hmr $30.00 A-Bolt 280 Rem $75.00 X-Bolt 6.5 creedmore $60.00 X-Bolt standard long action $65.00 Marlin 89 22LR $40.00 Savage 99 243/308 $175.00 Tikka LSA 55 308, have 2 $200.00 each XPR standard short action $30.00 Mossberg 14A 22LR $30.00 Tikka T3 6.5 PRC extended $85.00 CIL 830, 222Rem $50.00 A-Bolt 7mm Mag $75.00 Remington 760 308 $75.00 Remington 7600 30-06 $50.00 A-Bolt 260 Rem NIB $100.00 Marlin 17 HMR silver, 2 of them $35.00 each A-Bolt 204 Ruger $85.00 Shipping is on you!

categories:GunsSporting Goods

8465 impressions

462 views

Froglube CLP Lubricant-Protectant 5ml Squeeze Packs $19 for 10x ($1.90) $37 for 20x ($1.85) $85 for 50x ($1.70) $150 for 100x ($1.50) Shipping available at low cost FrogLube CLP is a 100% Bio-Based cleaner, lubricant, and preservative made in the USA from all domestic components. FrogLube was designed to allow treated firearms to achieve and maintain optimal performance under the most demanding conditions. FrogLube is excellent at dissolving carbon fouling and rust, FrogLube acts to season the metal surfaces it is used on and makes future clean-ups quicker and easier. FrogLube is the only firearms care products company that uses exclusively bio-based and food grade ingredients to meet existing firearms operating and care requirements. FrogLube products are engineered to deliver a 'tangible and immediate enhancement' from the initial use of the product and also produce a succession of following benefits resulting from the switch to bio-based care products. Firearm lubrication and cleaning products are MANDATORY to the proper operation and maintenance of a firearm. The use of gun care products is NOT AN OPTION. People have become accustomed to choosing products based on minimal criteria, such as friction reduction and corrosion resistance. The FrogLube bio-based/food grade combination adds non-flammability, non-toxicity, anti-oxidation, non-hazardous, de-carbonizing, all-temperature performance and long lasting durability to this list.

categories:GunsSporting Goods

22203 impressions

802 views

Fabarm chokes EXIS HP, INNER HP & INNER All new most in packaging Exis HP 9/10 extreme 7/10 Long $45 per or both for $80 Inner HP Cylinder - SOLD OUT 2/10 Short IC 5/10 Medium Mod 7/10 Long IM 9/10 Xtreme 12/10 Ultimate $35 per Deals on multiple One choke case free with the first sale of 2 or more chokes Inner- all new in choke holder Cylinder Imp Mod Imp Mod Full $20 per, deals on multiples Choke wrench $40 or $20 if you buy more than $100 worth of tubes Shipping available

categories:GunsSporting Goods

17480 impressions

606 views

I am selling my Savage 12 in 6.5 creedmoor. It has a boyds spike camp stock. Removable cheek rest. Bushnell banner 2 6-18x50 scope. 26" heavy barrel, accu trigger, Oversized bolt handle. The rifle has maybe 200 rounds through it. No rust and looks pretty much brand new. Very accurate out past 500 yards easy. Selling it because I just don't have the time for long range shooting. Must have PAL and will be checking Text or messaging on here is best

categories:GunsSporting Goods

1620 impressions

110 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19892 impressions

731 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

16748 impressions

636 views

Hi, selling a custom made 3 port muzzle brake for large calibre rifles. tread pitch is standard 5/8-24. brake is large enough to fit calibres up to .45cal. made of stainless steel, black nitrided, Up to 80% recoil reduction. two adjustable vertical rise screws included, and 5/8" crush washer also included. 4.5" long, 2 inch wide, and 1.25inch tall (aproxx) aprox 1lb. in weight. I shoot it with my 300PRC and 30-06, its loud as #$%#$ but almost no felt recoil! makes my 300prc feel like a 223. limited production run, 2 left of 10 price is $250-OBO

categories:GunsSporting Goods

24375 impressions

939 views

Savage model 64. Semi auto. New inbox. Comes with one magazine open sites grooved for scope mount. Price is firm. Takes 22 long rifle.

categories:GunsSporting Goods

2007 impressions

186 views

Remington 700 BDL long action stock. In good condition but from the '70s so some normal wear on it. Overall good condition.

categories:GunsSporting Goods

2303 impressions

160 views

Howdy there Townpost! I have another custom 12 Gauge delight for you to take a gander at! This is a custom-made one of a kind Ithaca M37 Featherlite put together by my gunsmith for me. As pictured, the overall length is 30 inches long and has a barrel length of 18.5 inches. It weighs 5 lbs, 7oz unloaded, so Featherlight is definitely even more apt than this when this thing was full length. Some fairly extensive work was done. Most notably the barrel and stock were cut down and reshaped the muzzle crown was nicely dressed with file work and reblued and it's nice, smooth and square to the barrel. The original red Ithaca fibreoptic front bead site was reinstalled at the new muzzle. The stock bolt with shortened and a nice decorative cast pewter medallion was added to the butt of the stock to cover up the bolt hole and add very nice piece of decorative flair. And sling swivels were added so this can carried around on sling. The action is very smooth the action release locks up properly, and the spring on it is in good condition. And it slam fires without a problem. What is slam fire you may ask? It means you can hold down the trigger and work the action and every time you close the action with the trigger held down the gun will fire. The gun will fire as fast as you can work the action. So needless to say it's pretty fun to shoot.  This would make an excellent hiking, camping or backpacking shotgun for predator defense in my opinion. Or if she just want a sawed-off shotgun that you can slam fire this is the gun for you. Ithaca started making short versions of the M37 for law enforcement called the Stakeout I believe those were mostly in 20 gauge and they came out sometime in the 70s or '80s. Inland Manufacturing to this day makes something similar to this called the Stakeout II for the US market with an MSRP of $750US. Short versions of the M37 have appeared in a lot of media, probably most notably is the shotgun in the movie Aliens where it's used for "close encounters". There's a well documented cut down Ithaca Featherweight by a Navy SEAL who put a duckbill spreader on it, put a magazine tube extension so that it held 8 and cut the stock off in much the fashion that this one is. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's very short when broken down, and light so it should be cheap to ship. PAL is a must!

categories:GunsSporting Goods

2339 impressions

225 views

Turn-key, no-expense-spared .300 Remington Ultra Magnum setup built for serious long-range hunting and precision shooting. This package combines a proven Remington 700 platform with top-tier optics, premium ammunition, and rugged protection—ready to go straight to the range or field. Rifle Remington 700 – .300 RUM TriggerTech upgraded trigger (crisp, consistent break) AICS detachable magazine conversion Custom oversized bolt knob for enhanced manipulation Weaver scope base professionally installed A rock-solid, highly configurable platform with thoughtful upgrades already completed. Optics Leupold VX-5HD 2-10x42 CDS-ZL2 FireDot Duplex reticle CDS-ZL2 zero-lock elevation system Custom CDS dial cut for Barnes VOR-TX TTSX 180gr .300 RUM Exceptional glass clarity, lightweight design, and bomb-proof reliability This optic is perfectly matched to the rifle and ammunition for confident, repeatable long-range shots. Leupold Mark 4 30mm Medium Rings (Matte) Premium duty-grade mounting solution ensuring zero retention under recoil. Ammunition Barnes VOR-TX TTSX Boat Tail – .300 RUM 180gr 2.5 boxes included Outstanding terminal performance, deep penetration, and consistent accuracy—ideal for large game. Case Pelican® Vault V770 Single Rifle Case Heavy-duty protection for transport and storage with Pelican’s renowned durability. This is a carefully assembled, high-end rifle package—no guesswork, no missing components, and no compromises. Ideal for a hunter or precision shooter looking to step into a proven .300 RUM system without the wait or setup hassle. Serious inquiries only.

categories:GunsSporting Goods

2304 impressions

189 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - SOLD Bolt, Chinese Type 56, stripped - $35 Dust cover, Chinese unmarked - $40 (1 available) Long Recoil spring, complete - SOLD OUT Short spring - SOLD OUT Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Gas tube handguard, black molded plastic (Tapco perhaps?) - $25 Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $20 Payment by EMT (shipped) or cash (F2F pickup)

categories:GunsSporting Goods

34563 impressions

1180 views

Good, used SKS crate for sale Dimensions: 44.25in x 17.75in x 13.5in (outside). Will fit a 42in long rifle or similar item. Would make a good coffee table. Has two racks inside to hold (5) rifles but more can be made. Missing some paint, some numbers legible on the sides, missing one slat of wood on bottom outside of crate. $50 - cash and carry Pick up only, will not ship

categories:GunsSporting Goods

12606 impressions

475 views