Kodiak 1st gen for sale, comes with attachments and cross mag. Tru glo red dot, flashlight with switch, 45 degree iron sights and magpul bipod.put two boxes of rounds down it and it’s been sitting since.

categories:GunsSporting Goods

3355 impressions

355 views

MacDef Straight Pull Rifle .308 Win 20" (not semi auto) Threaded Shilen Match Barrel .308 Win S/S Full length Tactical** Twist 1-10 Rifling #6 20" Muzzle Diameter .740Gas Block .750 Midwest Industries Forend. Detachable magazine, Magpul pistol grip. Adjustable rear stock, MDT brake. This is a non-restricted firearm. VALID PAL Required Scope BUSHNELL ELITE TACTICAL/TAC OPTICS LRS 5-15X40MM MILDOT Total Worth Over $3600.00+

categories:GunsSporting Goods

43941 impressions

4370 views

GSG 15 in 22LR for sale, works great cycles rounds no problem, has a 22round mag that you can fit 24 into. Has a magpul AFG2 fore grip on it and just a cheap amazon red dot. Pickup in beaumont only call me at 587 598 5606. $500

categories:GunsSporting Goods

3997 impressions

362 views

Magpul M-LOK angled foregrip - $25 Firefield Impact XL reflex sight - $50 TEXT ONLY

categories:GunsSporting Goods

3316 impressions

472 views

Next generation impact- and crush-resistant polymer construction • Paint-pen dot matrix panels allow identification marking • Self-lubricating follower increases reliability • Flared floorplate aids handling • Easy to disassemble for maintenance A larger-capacity version of the proven PMAG 5 7.62 AC. Magpul®’s PMAG 10-Round 7.62 AC Magazine uses next generation impact- and crush-resistant polymer construction to create this durable and extremely reliable polymer magazine for .308 Winchester-based family of cartridges. The self-lubricating follower increases reliability. Paint-pen dot matrix panels on the bottom of the body allow identification marking. Flared floorplate aids magazine handling and is super easy to disassemble for maintenance. Equipped with a long-lasting stainless steel spring. Compatible with short-action AICS-spec bottom metal and cartridges built on a 0.470" case head. Accepts cartridge lengths up to 2.86".

categories:GunsSporting Goods

8252 impressions

507 views

brand new, swapped out off gun when purchased for a different chassis. this one is grey in color. came off ruger american SA. text or email is best

categories:GunsSporting Goods

3708 impressions

316 views

Magpul hunter (grey) stock for short action centerfire ruger americans (.308WIN/6.5CM chamberings). Stock is brand new, I mounted it to to my .308 ruger american and then plans changed with the gun. Zero rounds fired with stock mounted. Stock comes with the 5 round 7.62 AI mag as well. Stock ready as it came (LOP spacers, mounting hardware, bedding blocks, etc. nothing missing).

categories:GunsSporting Goods

12962 impressions

890 views

Magpul CTR milspec stock in excellent condition, came off of Kodiak 181c Gen 2 asking $60

categories:GunsSporting Goods

5249 impressions

628 views

Selling my 308 it has a trigger tech trigger and magpul stock pack as well as magpul detachable 5 round mag , bolt was retimed at e&m precision, rifle has roughly 600 rounds through it now

categories:GunsSporting Goods

22164 impressions

2105 views

Magpul forend $40 black Stock upgrade to use ar based stocks. $80 Ati stock$40 Magpul moe ar grip $20

categories:GunsSporting Goods

6769 impressions

793 views

Almost new savage 110 with 25 power scope

categories:GunsSporting Goods

12489 impressions

1044 views

BACK IN STOCK! MAGPUL PMAG 27 round magazine for firearms that accept double stack 9mm Glock style magazines. PINNED TO 10 ROUNDS. Compatibility: Any firearm that accepts double stack 9mm Glock magazines such as G17, G19, Ruger PC Carbine, Just Right Carbine etc. Made in USA Color: Black Pinned: Yes, 10rd capacity FREE SHIPPING ON ALL ORDERS OVER $250 (before tax) WE SHIP CANADA WIDE. YOU MUST BE 18+ TO PURCHASE. PLEASE EMAIL US TO INQUIRE EMAIL US WITH ANY QUESTIONS!

categories:GunsSporting Goods

13813 impressions

1284 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:GunsSporting Goods

9289 impressions

1007 views

For sale are: Five Magpul AK-47 magazines Individual magazines are $32 These work well in the wk181c and m10x These magazines are pinned by rivet (not crimped or welded) to reduce their capacity to 5 rounds (from the original 30) to comply with Canadian law. Shipping available at actual cost or pick up in SE Edmonton. Please click on my user name to learn more about my business, see my other ads, trades or shipping policies. The section of C-21 that requires a PAL to purchase magazines has come into force. I don't need to run your PAL through the government website (like a firearms purchase) but I need to at least see it. This is the last import of this magazine type WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

13647 impressions

1390 views

Brand new Non-restricted Bolt action Caliber: 6.5 Creedmoor Capacity: 5-Round AICS Stock: Gray Magpul® Hunter American Barrel: 20", Free-Float, Cold Hammer-Forged, Threaded (5/8"-24) w/ Muzzle Brake Twist: 1:8" RH Safety: Manual Thumb Overall Length: 41.25" - 43.25" Length of Pull: 13" - 15" Weight: 9.2 lb. Magpul® Hunter American short-action stock featuring fully adjustable length of pull (spacers included) and comb height (available from Magpul®) and enhanced ergonomics. Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user adjustable between 3 and 5 pounds, allowing shooters to make that perfect shot. The one-piece, three-lug bolt with 70° throw provides ample scope clearance and utilizes a full diameter bolt body and dual cocking cams for smooth, easy cycling from the shoulder. Factory-installed, one-piece Picatinny scope base. Outstanding accuracy helps make every hunt a success. Heavy-contour (.850" at the muzzle) barrel features a Ruger Precision® Rifle Hybrid Muzzle Brake to effectively reduce recoil while minimizing noise and blast to the sides of the shooter. The visible, accessible and easy-to-actuate tang safety provides instant security. Also includes: one Magpul® PMAG® 5 7.62 AC magazine for reliable detachable box magazine compatibility. Made in USA

categories:GunsSporting Goods

10483 impressions

592 views

Maple and black stock , new adjustable magpul bipod, 2 mags (one is new) , and 1 box of same 180 grn used to sight in. Comes with a brand new Swarovski z5i+ 5x25x56 with variable illumination. The Brw-I reticle , and swaro's ballistic turret ( which is very slick) , 1 Flip up , and 1 full neoprene scope cover. A new sling , and 1 new browning recoil hawg muzzle brake which is still in the package. Rifle is in good shape , Scope and all accessories are brand new, and immaculate. Selling because I know I will not use it much.

categories:GunsSporting Goods

2541 impressions

352 views

Bergara B14 HMR RH chambered in .308 (20in barrel, 1:10 twist) with Bergara 5rd AICS mag & 3 spacers. In addition, comes with 2 Magpul 10rd AICS mags in OG packaging (worth $130), Talley one piece picatinny rail (worth $80), and Masterlock trigger lock w/ key (worth $30). Less than 200rd count, gun regularly prints 5rd sub-moa groups, even with some non-match ammo. Package option for $2375 includes a B&T Accushot BT46-LS17 PSR bipod, BT74 Atlas Raider Cleat feet, BT22 Atlas 3" leg extensions, and BT15 4" Atlas Picatinny rail adapter. Comes with a velvet lined bag with drawstring top to carry the cleat feet and leg extensions. Bipod can pivot 0°, 45°, 90°, 135°, and 180°. Attaches to pic rail through QD lever. Altogether, spent $900 on this bipod system. Can be yours for $725. Provides an extremely stable, rock solid shooting position. PAL and email required. Shipping can be arranged on buyer's dime. Open to local sale.

categories:GunsSporting Goods

1763 impressions

170 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2325 impressions

360 views

Brand new Non-restricted Action: Bolt Caliber: 308 WIN Magazine Capacity: 5 Hand: Right Barrel Colour: Cerakote Grey H-237Q Barrel Material: Carbon Steel Barrel Length (in)/(cm): 18 / 45.720 Rate of Twist (in): 1 in 10 Receiver Colour: Cerakote Grey H237Q Receiver Material: Carbon Steel Stock Colour: Matte Black Stock Material: Synthetic Stock Type: Magpul Length of Pull (in)/(cm): 13-15 / 33.020 Overall Length (in)/(cm): 38.5 / 97.790 Weight (lb)/(kg): 8.9 / 4.04 Made in USA

categories:GunsSporting Goods

5204 impressions

443 views

Brand new MIL-SPEC carbine receiver extension compatible Chrome silicon lock spring Sloping cheek weld Shielded release latch Replaceable 0.30″ rubber buttpad Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments 1.25″ sling loops Lanyard hole for custom para-cord rigs Length: 6.9” Length of pull adjustment range: 3.3” Length of pull – Collapsed: ~10.5 Length of pull – Extended: ~13.8” Weight: 8 oz Made in USA

categories:GunsSporting Goods

2156 impressions

467 views

Brand new Heavy-Duty quick-disconnect (QD) sling swivel Push-Button quick-detach function for 1-1/4" webbing Rugged manganese-phosphate finished steel construction Compatible with standard QD sling attachment points The Magpul QD Sling Swivel keeps your rifle sling rock steady when you depend on it most. This heavy duty quick-disconnect tactical rifle sling swivel features a push-button quick-detach function specifically for 1-1/4" webbed strapping. The rugged manganese-phosphate finished stainless steel construction lets you know it's ready to work as hard as you do. The Magpul QD Sling Swivel works perfectly with standard QD tactical sling attachment points.

categories:Guns

2096 impressions

320 views