Wanted To Buy· Classified Ads in Canada

$7500

Laugo Arms Alien Full IPSC Kit

You must have an exemption letter and be qualified to buy this pistol license wise . Alien Pistol Semi Automatic 9mm. Gas operated Pistol not standard blowback. Regarded as a pistol advanced beyond other pistols the Alien has many features not available on standard handguns. Included is the full kit plus 4 magazines for a total of 7 magazines and a spare gas pistol system and parts kit. These kits sell to the USA for $5000 without extra mags or parts. Pistol has lowest bore axis of any pistol. That means the Bore is lower than the hand holding the pistol leading to minimal muzzle flip. The pistol features an standard pistol sight rail "irons" and a Sight rail with A Red dot designed for the Alien. The toolless exchange design requires the shooter only to press out a pin to exchange slides. The process takes less than 15 seconds. This pistol has been fired for a total of 500 rounds. By far the most accurate pistol I have ever fired in over 40 years. From the Laugo Arms website The Laugo Arms Alien Full Kit is the ultimate package for enthusiasts and competitive shooters. Iron Sight Top Rail and Optic Top Rail equipped with a Laugo Arms red dot sight are both included for maximum versatility. A magwell and Elornis Industries holster system complete the setup for optimal performance at the range. FULL KIT INCLUDES: Laugo Arms Alien pistol FINISH: Duotone Black / Green Three (3) 17 Round Magazines (10rnd Limited Capacity Magazines also available) Standard Fiber Optic Iron Sight Top Rail Optic Top Rail with Laugo Red Dot Sight Aluminum Magwell Elornis Holster and Adjustable Mounting System Cleaning Supplies Tool kit Dry-Fire Training Chamber Insert Custom Hard Case – Large Willing to take Gold and Silver Bullion on Trade. I don't have an exemption letter so I cannot accept trades of pistols. I am looking for a Winchester Deluxe 1892 takedown model with a 16" barrel in .357 magnum but that's all for firearms trades. If you have any questions about the pistol please ask as long as you have the exemption status.

Edmonton, AB6 months ago

$10

Drayton Valley Gun Show

Drayton Valley, AB6 months ago

Photo of ANTIQUE (no PAL) Smith & Wesson .44 Russian Double Action New Model No. 3 Revolver

$3750

ANTIQUE (no PAL) Smith & Wesson .44 Russian Double Action New Model No. 3 Revolver

Calgary, AB6 months ago

TBD

WTB Tikka action .473 bolt face

Edmonton, AB7 months ago

$2.25

300 Win Mag 180gr Winchester

Calgary, AB8 months ago

$10

FORT MACLEOD GUN & ANTQUE SHOW

Lethbridge, AB9 months ago

Photo of FORT MACLEOD GUN SPORTSMAN & ANTIQUE SHOW

$10

FORT MACLEOD GUN SPORTSMAN & ANTIQUE SHOW

Fort Macleod, AB9 months ago

$?

Wanted, 300 Win mag neck sizing die

Sherwood Park, AB1 year ago

$1234

In search of : Reloader Preds

Grande Prairie, AB1 year ago

$20

Triangular sks firing pin

High Prairie, AB1 year ago

1-20

Weatherby cartridge collection

Carstairs, AB1 year ago

Photo of Brass Casing Processing and Ammunition Reloading Business

$32000

Brass Casing Processing and Ammunition Reloading Business

For Sale $32,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $32,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area

Stony Plain, AB1 month ago

Photo of Spartan Javelin Pro Hunt Tac Standard Length

$300.00

Spartan Javelin Pro Hunt Tac Standard Length

Lloydminster, AB8 months ago

$200

Brand new Mastermount Rear Biased Optic Mount $200

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

Calgary, AB1 month ago

$1234

Looking to buy Ruger Redhawk or Super Red Hawk

Redwater, AB1 year ago

Tbd

Looking for a savage 308

Beaumont, AB5 days ago

Wanted: Collector looking for Hunting firearms or collectibles..

Edmonton, AB1 month ago

Trade

Trade Reloader 22 for Reloader 26 Powder/Will buy RL 26 if you're selling

Calgary, AB1 month ago

WTB h&r barrels

Heisler, AB1 month ago

$123

Wanted: Steel 12 gauge shotgun shells

Calgary, AB7 months ago

$1234

ISO M1A Carbine

Calgary, AB1 year ago

Wanted To Buy in Alberta

Location

Having a garage, estate, or yard sale?

Item Type

Gun Type

Action

Caliber