This is a machined steel replacement charging handle for the henry homesteader; one of the 2 remaining semi automatic pistol caliber carbines. The handle is large and easy to manipulate when under stress or wearing winter gloves. It also is more comfortable than the factory handle. Shipping available at actual cost or pick up in SE Edmonton. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

23725 impressions

1098 views

For sale are KCI glock magazines They have been pinned by rivet (not crimped) to reduce thier capacity from 33 rounds to a canadian legal 10. They work well in the PC9, K9, Henry Homesteader, Raven9, TNW areo and the JR carbine in addition to glock 17/19 pistols. Multiple units available One magazine is $60 Five magazines are $250 10 magazines are $450 Shipping available at actual cost or pick up in SE Edmonton. A PAL is required to buy these items.

categories:Sporting GoodsGuns

36953 impressions

940 views

Winchester Model 94 SRC Calgary Stampede (1981) - 32 Win Special, 16" Barrel, Trapper Saddle Ring Carbine, Deluxe Wood, Pewter Finished Receiver, Original Sights Rifle is as new with the original Styrofoam shipping cartons & cardboard Sleeves, The Stampede also has its oak display case. $4,750.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

49808 impressions

1422 views

Selling off extras, Earlier in the year I had made a 50Beowulf (12.7x42mm) rifle on the SrV2 Siberian platform, works Spectacular! and in doing so I also had 3 extra barrels made up at the same time to spread the love of the Big bore. these are more or less a "Complete" Calibre change for your AR type rifle, as the barrels include a 5rd Beowulf Mag w/ the proper follower. They are head spaced for a Grendel (Type 2) AR Bolt (7.62x39 AR bolts are "Type 1" and are NOT compatible) $500 for the (x1) 8" model  $525 for the (x2) 12.5" model they are all threaded 3/4x24tpi & .875" Gas block Diameter (Pistol for 8" and Carbine for 12.5") Gas port is NOT DRILLED (for use also in the PAR / SAR / MDI and other Non-Semi AR-type rifles) All it takes to be used in a Semi is to drill the Gas port (best to see a proper gunsmith about it) $75 for the Radial Door breacher As of Sept 1 I believe these will require the eyebawlz to look over a valid Pal, No pal or Unwilling to provide one will result in No Sale, Deposits are NON-Refundable & are valid for 14 days. Shipping is on the buyer. 

categories:Sporting GoodsGuns

8135 impressions

834 views

Brand new Sling Mount Kit – TYPE 1 can be added to either side of the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks for use with push-button QD Sling Swivels or our own Magpul® QDM. Heavy-duty black phosphatized steel construction easily installs with provided hardware. Swivels not included. Made in the USA.

categories:Sporting GoodsGuns

3620 impressions

564 views

Hi All, I also have some various 9mm Reloads for sale. Approx. 1000 lead round nose 124g? .20 cents/round. ***SOLD*** Appox. 1000 FMJ 115g .25 cents/round ***SOLD*** A few hundred 'Very Hot and Fast' (as told to me by the guy I bought them from) 90g HP .20 cents/round So I would suggest these last ones listed to only fired in a carbine only, not a pistol. I'd also give you 5 rounds to try for free if your local. So Local to Lethbridge please. If you want to commit to buying a larger quantity I'd be willing to travel a bit ;) Text, email or reply here please. Thanks for viewing my Ad :)

categories:Sporting GoodsGuns

49920 impressions

1543 views

Mossberg .22 cal with a the scope and 1 clip. $1000.00 JR carbines .45 asp with the scope and 2 10 round clips. $2000.00 Together for $2500.00

categories:Sporting GoodsGuns

10781 impressions

657 views

4 level lll Armourcore ballistic panels. 4'x8'x5/8" thick. Made by WACO INDUSTRIES Perfect for safe/vault room, panic room, firearms room or any protective space requirements at home or workplace. Valued at $900-1100 USD/Sheet. Will sell or trade equal value of $500 CAD/sheet. Interested in Bennelli M4 or 9mm carbine for competition.

categories:Sporting GoodsGuns

6747 impressions

608 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 . 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 . 4) Cooey Elevator - .075" x 1.21" - $15 . 5) Husqvarna Elevator - $45 . 6) Marble Double Step - Rifle Elevator - $35 . 7) Marble Double Step - Carbine Elevator - $35 . 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 . 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 . 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD . 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 . 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD . 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 . 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD . 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 . 17) Savage Fishhook Elevator - $40 . 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD . 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 . 21) Savage 24 Elevator (Replacement Style) - SOLD . 22) Win Early Elevator - $40 . 23) Winchester 1A Elevator - dated (.207") - $60 . 24) Winchester 1B Elevator - dated (.162") - $60 . 25) Winchester 1C Elevator - no date (.175") - $60 . 28) Win 2C Elevator - .60"W x 1.625"L - $35 . 29) Winchester 3C - 6S Elevator - $50 . - . 31) 6-48 Filler Screws (4) - Blue $20.00 . 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 . 33) 6-48 Filler Screws (4) - Stainless $20.00 . 34) 8-40 Pan Head Filler Screws (2) $20.00 . 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 . 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 . - . 40) Husqvarna Front Sight Hood - $85 . 41) Marlin pre 72 Round Front Sight Hood - $45 . 42) Marlin post 72 Front Sight Hood - $60 . 43) Sako - Finnwolf Hood - $85 . 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD . 45) Parker Hale Front Sight Hood - $85 . 46) Browning (Belgium) Safari Front Sight Hood - $85 . 47) Winchester Model 9422 Front Sight Hood - $40 . 48) Winchester post 64 Model 94 Front Sight Hood - $40 . 49) Winchester pre 64 Model 94 Front Sight Hood - $40 . 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 . 51) Winchester post 64 Model 70 Front Sight Hood - $75 . 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 . 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

229206 impressions

3020 views

4) Winchester 22B -  $350 - $375 . 5) Winchester 22G   -  $250 - $300 . 6) Winchester 22H -   $400 - $500 . 20) Winchester 42A Sporting Leaf  0-8 Stamped 1873  (50%)   73SL-1   $425.00 . 21) Winchester 42A Sporting Leaf  0-8 Stamped 1873  (95%)  73SL-2    $750.00 . 22) Winchester 42A Sporting Leaf  0-10 Stamped 1876  (80%)   76SL-1   $700.00 . 25) Winchester 42A Sporting Leaf  0-30 not Stamped   (30%)   95SL-1   $450.00 . 26) Winchester 42A Sporting Leaf  0-30 not Stamped   (90%)   95SL-2   $750.00 . 31) Win 44A Carbine Ladder Sight - $285.00 -  $485.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

113568 impressions

5010 views

Rifle is in excellent condition, only 40 rounds shot. Comes with Bushnell trophy xtl 4x12x40 scope and Talley rings. Ammo also available. Only trade intrested in is 30 M1 Carbine non restricted. Email or text only. Valid PAL required.

categories:Sporting GoodsGuns

36755 impressions

2501 views

looking for buttstock and lower forestock for a #5 m1 lee enfield jungle carbine

categories:Sporting GoodsGuns

17831 impressions

1121 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 . 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 . 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 . 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 . 6) Older Original 1A - 1B - 1C Elevators - $60.00 . 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 . 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 . 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 . 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 . Screws . 14) 6-48 Filler Screws (4) - Blue   $20.00 . 15) Win 1890-06-62 Tang Screw  - 40.00 . 16) Win 1894-1892-1873 PG Tang Screw - 60.00 . 17) Win 1876-1886 Tang Screw  -  40.00 . 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 . 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 . 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 . 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 . 24) Win 1894 (pre 64) Loading gate screw - 40.00 . 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 . 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 . 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 . 29) Win 1885 Low Wall Tang Screw - 40.00 . 30) Win 1885 High Wall Tang Screw - 40.00 . --- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

134574 impressions

7932 views

Just got in 454 Casul Rossi M92 carbines stainless steel .NEW holds nine rounds.will shoot a 300 gr. Bullet at 2000 fps. 20% more power than 44 magnum. you can also use 45 long, colt ammunition. all fire I’m 15% off all ammunition 20% off.

categories:Sporting GoodsGuns

75072 impressions

5476 views

Rifle Specs (6.5 Creedmoor): • Barrel: 26” stainless fluted heavy barrel • OAL: 46-1/8" • Capacity: 4+1 (detachable rotary mag) • Twist Rate: 1 in 7” • Weight: Approx. 8.3 lbs 🔧 Features: • Black & gray Max synthetic stock • Fully adjustable comb + LOP spacers • Recoil Hawg muzzle brake (5/8”-24 TPI) • Inflex 2 recoil pad • Extended bolt handle Built for long-range precision & serious performance. Vortex Tactical 4x16x44 • EBR-2C FFP reticle – accurate holdovers & windage at any magnification • 4x optical system – edge-to-edge clarity • Exposed, low-profile elevation & windage turrets • Side parallax adjustment (10 yards to infinity) • Rugged one-piece aluminum tube Affordable, field-ready FFP optic for precision shooting. Pelican® V770 Vault Rifle Case: • Fits scoped rifles – from carbines to full-length magnums • Crushproof, dustproof, & weather-resistant • High-impact polymer shell • 4 layers of customizable protective foam • 4 push-button latches for secure + easy access • Heavy-duty ergonomic handles • Interior: 50" x 10" x 6" (127 x 25.4 x 15.2 cm) Perfect for safe storage or air travel. DM for more info, pics, or to arrange a viewing.

categories:Sporting GoodsGuns

12449 impressions

1183 views

Mint Condition, Built Savage 110BA 338 Lapua Magnum, Military Sniper,Anti-Material Rifle with Blue Diamond Huskama Scope with Custom Laser cut turrets to match the Ammo for 285 grain and 250 grain. Over-sized Jumbo Bolt with Custom Blue powder-coating. Complete with mounted telescoping 13" to 36" Bi Pod. It is a .416 necked down to .338 caliber. Comes with 4 1/2 box's of ammo and also a new carbine fiber cleaning rod. Also comes with a Custom made double locking aluminum case. This is a 1 Mile and beyond rifle. Serious inquiries Only

categories:Sporting GoodsGuns

11316 impressions

991 views

Brand new While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit– TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in USA

categories:Sporting GoodsGuns

2377 impressions

397 views

Brand new Manufacturer: Hi-Point Fits: Hi-Point 995 Carbine Caliber: 9 mm Capacity: 5 Rounds Material: Steel and Polymer  Made in USA

categories:Sporting GoodsGuns

4025 impressions

421 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 6 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:Sporting GoodsGuns

6247 impressions

488 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5373 impressions

437 views

Brand new This Magazine Well Insert Assembly is designed to work exclusively with the Ruger PC Carbine. It accepts all Glock 9mm magazines. The flush-fit design is made from rugged, glass-filled polymer material for strength and durability. Quick and easy installation; instructions included with product. The 5/32″ hex wrench included with PC Carbine is required for installation.

categories:Guns

6888 impressions

433 views