Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:GunsSporting Goods

6789 impressions

453 views

For sale is a made in Alberta solution for those looking to add optics, lights and lasers to thier Henry Homesteader. A full 6061 anodized aluminum rail stretches out to the end of the forend while a phenolic cover protects the hands from heat. Rifle not included. Optics are not included but as an introductory offer, you can get a 20% discount on all, in-stock optics with the purchase of the rail system. Pick up available in SE Edmonton. Shipping available at actual cost. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

1542 impressions

406 views

Brand new Model Number: EXPS2-0GRN Night Vision-Compatibility: None Water Resistant: Submersible to 10ft. (3m) Mount: Quick-detach lever fits both 1 Weaver and MIL-STD-1913 rail Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EXPS2 offers true 2-eyes-open shooting and provides an unparalleled targeting experience. The all-purpose EXPS2 features easy-to-adjust side buttons and a quick-detach lever. It has a transversely-mounted lithium 123 battery. The increased height of the EXPS provides iron sight co-witness access in the lower third of the viewing window. Whether you’re using the sight for law enforcement or hunting, the EXPS series sights are the premier optics in the line.

categories:GunsSporting Goods

3259 impressions

395 views

EP8 1-8x28 FFP LPVO - 34mm Tube The LPVO has long since earned its place, bridging the gap from holographic/ red-dot types to high magnification optics not traditionally well suited in CQC situations. With ever increasing capability, the LPVO has become a staple allowing tactical teams and competitive shooters to get the most out of any particular member, instantly. The EP8 1-8’s thin edges and wide FOV make this true 1X perfect for close quarters, with a quick throw of the lever to 8X increasing effective range at a moments notice. Magnification: 1-8 Objective Diameter: 28mm Eye Relief: 3.74" FOV @ 1x: 121.15', 22 deg FOV @ 8x: 14.56', 2.78 deg Tube Size: 34mm Turret Adjustment: 1/4 MOA Reticle Position: FFP Reticle Details: BDC style: 'KL Box' Elevation Adj. Range:: 110 MOA Windage Adj. Range:: 110 MOA Illuminated Reticle: Red Turret Rotation: Counter Clockwise (CCW) Color: Matte Black Weight: 21 oz Sunshade: No Battery Included: CR2032 Throw Lever: Integrated/removable

categories:Guns

8132 impressions

721 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:GunsSporting Goods

5073 impressions

513 views

Brand new The Bushnell® AR Optics Chase ™ is two sights in one. Push one button for a bright, continuous laser beam in red. Push another to engage the flip-up Front sight. The Chase™ mounts over the bore, with the laser allowing for a seamless, accurate transition between multiple targets. The Back-up sight is ideal for longer shots, and integrating both saves valuable space on the accessory rail. Features: Laser sight with integrated flip-up front sight Red laser One-button operation with constant on Green laser: 525nm; <5mw Class IIIa Red laser: 635nm; <5mw Class IIIa Over bore laser location Waterproof

categories:Guns

4514 impressions

556 views

Remington tactical shotguns are rugged, ultra-dependable and continually evolve as they’re called to serve in new, increasingly demanding environments. Built on our legendary pump action that’s become the gold standard for high-risk applications, the Model 870™ Express Tactical with a quick pointing 18 1/2" barrel and includes our extended ported Tactical Rem Choke. It packs a full 7 rounds of 2 3/4" or 3" 12-gauge firepower with the factory installed 2-shot extension. The Model 870™ Express® Tactical with XS® Ghost Ring Sights is optimized for rapid target acquisition and precise shot placement with the XS blade sight and XS Ghost Ring sight rail (fully adjustable for windage and elevation), which accepts optics and sight systems as well. Both models have black synthetic stocks and fore-ends with sling swivel studs. Receivers are drilled and tapped. Receiver milled from a solid billet of steel for maximum strength and reliability Silk-smooth twin action bars prevent inding and twisting for maximum strength and reliability 18 1/2" tactical barrel with XS® front blade sight RC Tactical (ext/ported tube) XS Ghost Ring sight Rail (mounts to receiver) Sight is fully adjustable for windage and elevation Front blade sight works in conjunction with Ghost Ring to quickly and accurately acquire target Tactical style fore-end 2-shot magazine extension Receiver drilled and tapped for scope mounts (XS Picatinney rail with ghost ring included)

categories:GunsSporting Goods

3683 impressions

302 views

Bergara HMR Pro (Premier Series) in .308 Winchester with a 20" barrel. Lightly used with approximately 207 rounds through it. Functions perfectly — smooth bolt, clean barrel, and well-maintained. Picatinny rail is included for mounting optics. Scope and rings are not included. Bought in fall 2024

categories:GunsSporting Goods

3014 impressions

336 views

🔭 Scope Details: Model: Vortex Crossfire II 3-9x40 (V-Plex Reticle) Condition: Installed less than a year ago, purchased from The Shooting Centre on October 28, 2024. Features: Magnification: 3-9x Objective Lens Diameter: 40 mm Tube Size: 1 inch Field of View (at 100 yards): 34.1 - 12.6 ft Parallax Setting: 100 yards Fully multi-coated lenses for excellent light transmission Waterproof, fogproof, and shockproof Fast focus eyepiece Lifetime Vortex VIP Warranty 🔩 Ring Details: Model: Vortex Optics Pro Series Rings (1" Low, 0.75" / 19 mm) Condition: Excellent, installed with the scope, includes original screws and Torx key Material: 7075-T6 aircraft-grade aluminum Mount Type: Compatible with Weaver and Picatinny rails Made in the USA Torque Specs: Base: 30 in/lbs Ring screws: 18 in/lbs 💰 Price: Complete Set: $368 CAD Scope Only: $249 CAD Rings Only: $119 CAD 📍 Location: Calgary, Alberta Local pickup preferred, but shipping within Canada is possible at buyer's expense.

categories:GunsSporting Goods

2797 impressions

510 views

Brand new Scope includes Eagle vision mounting Bracket with hardware. The scope is brand new and never been mounted. $900 obo

categories:GunsSporting Goods

1224 impressions

355 views

Gold'n Loan Pawnshop is excited to announce that along with our growing selection of new and used non-restricted firearms and ammunition we are now an authorized Leupold dealer with access to their full catalog. We are open 7 days a week in the town of Stony Plain. Let us help gear you up for your next hunting or range adventure.

categories:Guns

16428 impressions

1811 views

Brand new, never fired https://weatherby.com/store/model-307-alpine-mdt-carbon/ With a brand new Burris Veracity PH 3-15x44 https://www.burrisoptics.com/riflescopes/veracity-ph-3-15x44 rifle new is over $5k and optic was $1500 No trades wanted Willing to separate for right price

categories:GunsSporting Goods

4247 impressions

734 views

Hunting Clothing All prices 40% off Sitka and Kuiu retail price, No taxes and no import duty and fees. Prices are firm If you are near Airdrie feel free to stop by and see the items in person. Kuiu XL Guide Jacket Valo pattern Kuiu size 38 waist Guide pants Valo pattern Kuiu XL Pro quarter zip hoody Valo Pattern Kuiu XL light weight gloves Valo Pattern Kuiu balaclava Valo pattern kuiu Large Yukon Boot Gators Valo Pattern Sitka XL Gradient jacket Marsh Pattern Sitka XL Fahrenheit down Vest Marsh Pattern Sitka XL Hudson Bibs Marsh Pattern Sitka XL Hudson Jacket Marsh Pattern Sitka XLT Jetstream jacket Optifade open country pattern Sitka XLT core light hoody Optifade open country pattern Sitka size 38 waist timberline pant Optifade open country pattern Sitka XL Kelvin Aerolite Jacket Optifade Subalpine pattern Sitka XLT core light hoody Optifade Subalpine pattern Sitka size 38 waist timberline pant Optifade Subalpine pattern Rain Gear (used 50% off retail) Kuiu Large Yukon rain jacket VIAS Pattern Kuiu XL Yukon rain pants Vias Pattern Tripods Sirui T-024SK with the VA-5 video head Vortex optics Pro GT with binocular attachment

categories:GunsSporting Goods

2870 impressions

814 views

This is a sub moa rifle with trigger tec,Harris bipod, cadex chassis, ai clip 12 round,us optic angle finder,us optics level,night force attacker 5x25 x56 34mm tube,atc rings spent almost ten grand building and pelican case

categories:GunsSporting Goods

6876 impressions

592 views

Brand new The Bushnell AR Optics Rush is a hi-rise mount with built-in laser sight for close quarter environments. The integrated, offset laser saves space on the rifle, and projects a continuous, powerful red beam with one push of a button. It replaces your existing mount, and is compatible with any optic that can be mounted on a picatinny rail. Offset laser Easy battery replacement One-button operation Waterproof Color: Black Battery Type: CR2 Batteries Included: Yes Laser Color: Red Output: <5mW

categories:GunsSporting Goods

1277 impressions

285 views

Brand new Lifetime Warranty The X3 Tactix MPRD (Micro Pistol Red Dot) is an extremely compact and versatile pistol red dot with a 3 MOA dot that will ensure ultimate precision and rapid target acquisition. Designed with a Shield-type footprint, the optic features a 12 hour auto shut off and 10 levels of brightness with night vision compatibility on levels 1-2.. Magnification: 1X Parallax Adjustment: Parallax Free Lens Coating: Fully Multi-Coated, Low Light Enhancement Dot Size: 3 MOA Material: 6061 Eye Relief: Unlimited 1 MOA Windage and Elevation Adjustment Shield RMSc Type Footprint 10 levels of Red Illumination Night Vision Compatible on Levels 1-2 Accepts One CR2032 Battery 50,000 Hours Battery Life

categories:GunsSporting Goods

13157 impressions

1324 views

Brand new No-drill, Picatinny Side Mount for Type 81, manufactured by AK MasterMount USA. The mount was custom engineered and manufactured specifically for the Type 81 rifle and was extensively tested to ensure reliability, durability and zero-holding properties. The side mount installation is completely reversible and does not involve any drilling or permanent alterations to the rifle. Fits all Type 81 versions. This “NO-MOD” steel optic mounting side rail is the perfect accessory for the Type 81 in order to mount optics and accessories. It attaches to the hammer and trigger axis pin holes by the use of threaded axis pins, standard on Type 81 SR and optional as an Optics Ready "OR" model Type 81 SE. Threaded pins are optionally available for rifles without built-in receiver pins. No drilling, tapping, riveting, or gunsmithing needed. This steel side rail is low profile, rock-solid, and parallel to the barrel. The side rail dimensionally is the standard AK pattern, however was specifically designed for the AK MasterMount Optics Mounts for ideal positioning, cheek weld and ergonomics. Made from 1018 steel. The pins are custom manufactured in the USA of Grade 8.8 strength steel.

categories:GunsSporting Goods

10257 impressions

1044 views

Brand new The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm. Made in USA

categories:GunsSporting Goods

4990 impressions

408 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 3 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:GunsSporting Goods

4728 impressions

412 views

Brand new Description: This optic goes on the 320 M17 – 320 LDC – 320 LDC PRO – 320X5 and 320X5 Legion Designed for fast, responsive target acquisition and accuracy, the ROMEO1PRO miniature open-reflex red dot sight was engineered to withstand the punishment of harsh environments. With an upgraded emitter for superior brightness and outstanding battery life, the ROMEO1PRO is capable of mounting to any SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO reflex sight interface and mounting hole spacing using the included M4 mounting screws. – Molded glass aspheric lens with high performance coatings for superior light transmittance and zero distortion – 3 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions – TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot – New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime – MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not – Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service – Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof performance – Ruggedized protective steel shroud included for extreme durability – SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Features: Color: Black Weather Resistance: Yes Objective Lens Diameter: 30mm Magnification: 1x Lens Material: Glass Fabric/Material: Aircraft Grade Aluminum Attachment/Mount Type: Picatinny Reticle: 3 MOA Dot Gun Model: Sig Sauer Length: 1.8″ Height: 1.1″ Adjustment Type: MOA Battery Type: CR1632 Weight: 0.06 lb Included Accessories: Mounting Screws Brightness Settings: 12 Water Resistance Level: IPX-7 Illumination Color: Red Width: 1.2″ Battery Life: 20000 hours Objective Window Size: 28x18mm

categories:Guns

8627 impressions

856 views

Brand new The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm.

categories:GunsSporting Goods

7068 impressions

600 views