Brand new Tikka T1x, Right hand, 20" rifle has been modified to further increase the accuracy. Right hand, 19.5" barrel. Fully Ceracoted (barrel and action) Graphite Black, recessed target crown, match chamber (barrel removed and set back slightly, in order to re-chamber). Comes with 15 min Picatinny rail. Unfired before or after modifications!

categories:Sporting GoodsGuns

60094 impressions

4056 views

Bergara HMR Pro (Premier Series) in .308 Winchester with a 20" barrel. Lightly used with approximately 207 rounds through it. Functions perfectly — smooth bolt, clean barrel, and well-maintained. Picatinny rail is included for mounting optics. Scope and rings are not included. Bought in fall 2024

categories:Sporting GoodsGuns

4764 impressions

495 views

Selling a brand-new, unfired Benelli Lupo Bolt-Action Rifle chambered in 6.5 PRC. It features a 24-inch Crio-treated, free-floating barrel. The Lupo's ergonomic design includes a black synthetic stock with Benelli's Progressive Comfort recoil reduction system. It has adjustable trigger pull weight between 2.2 to 4.4 pounds. Additional features include a detachable 5-round box magazine, a sculpted bolt with a 60-degree throw for smooth cycling, a two-piece Picatinny rail for easy optics mounting. Not interested in trades, and the price is firm. A valid PAL is required and must be validated to complete the transfer.

categories:Sporting GoodsGuns

5426 impressions

713 views

338 Norma Magnum XXL High Country Hunter Rifle. Built By Blue Mountain Precision. Action: BMP ELRX by Defiance Machine, RH Barrel: Benchmark Cut-Rifled Carbon Fiber Sendero 9.5 Twist 27” Stock: Manners Composite Stocks EH1 Stock Hardware: Front Picatinny Rail Stock Color: Elite Tactical Moss Camo Trigger: TriggerTech Set @ 2.0 Lbs Muzzle Brake: BMP 4 Port Seamless Bottom Metals: Hawkins Precision Hunter DBM With 3 RD Magazine Finish: Cerakote Black Price Is For Rifle Only, Rifle Is Brand New, Has 30 Rounds Through It. Scope Is Zeiss Conquest V6 5-30X50 And Can Be Included For Additional Cost. Comes With 70 Loaded Rounds Of 300 Grain Berger Elite Hunters With Lapua Brass. Comes With 29 Pieces Of Once Fired Lapua Brass. Ph: (780) 404-9776

categories:Sporting GoodsGuns

5955 impressions

764 views

Remington 700 LTR (Light Tactical Rifle), chambered for .308 Win, it features a slimmed down HS Precision stock to improve portability and reduce weight. The stock incorporates a with full length aircraft aluminum bedding block stock that is Kevlar and fiberglass reinforced so it stays dimensionally stable under the worst of adverse conditions, hex-head Allen screws to secure the barreled action, and make the barrel free floating. It also has an extra sling stud at the front to mount a bipod like the Harris Bipod. The flutes in the 20″ LTR barrel not only assist in weight reduction and heat dissipation, but are engineered to enhance barrel rigidity for pinpoint accuracy and is finished with a crowned muzzle. It comes with Timney trigger make this rifle extremely accurate and also comes with Leupold Mark IV 20 MOA Picatinny Rail. The LTR was designed as a lighter weight, compact tactical rifle for urban situations but I find it perfect hunting rifle for its precision, compact and lightweight. I only fired it to break in the barrel and sight-in in the range and have it ready for hunting, around 150 rounds give or take. It’s .5 MOA groups guaranteed at 100 yards with 168 gr. match grade rounds. Will ship anywhere in Canada at buyers expense, also available for pick up and delivery in Edmonton, Alberta

categories:Sporting GoodsGuns

12153 impressions

1487 views

Gunwerks Elevate 2.0 Bipod "The Widest Range Of Height Adjustment In Any Hunting Weight Bipod" -super light at 12oz -5-19" of usable height -120 degrees of cant along with 3 leg splay positions -mounts to picatinny rail -was $550 new -spiked feet were $60 new

categories:Sporting GoodsGuns

1284 impressions

413 views

🔭 Scope Details: Model: Vortex Crossfire II 3-9x40 (V-Plex Reticle) Condition: Installed less than a year ago, purchased from The Shooting Centre on October 28, 2024. Features: Magnification: 3-9x Objective Lens Diameter: 40 mm Tube Size: 1 inch Field of View (at 100 yards): 34.1 - 12.6 ft Parallax Setting: 100 yards Fully multi-coated lenses for excellent light transmission Waterproof, fogproof, and shockproof Fast focus eyepiece Lifetime Vortex VIP Warranty 🔩 Ring Details: Model: Vortex Optics Pro Series Rings (1" Low, 0.75" / 19 mm) Condition: Excellent, installed with the scope, includes original screws and Torx key Material: 7075-T6 aircraft-grade aluminum Mount Type: Compatible with Weaver and Picatinny rails Made in the USA Torque Specs: Base: 30 in/lbs Ring screws: 18 in/lbs 💰 Price: Complete Set: $368 CAD Scope Only: $249 CAD Rings Only: $119 CAD 📍 Location: Calgary, Alberta Local pickup preferred, but shipping within Canada is possible at buyer's expense.

categories:Sporting GoodsGuns

3412 impressions

612 views

Brand new Non-restricted  Caliber: .308 WIN Capacity: 10 Action: Bolt Action Barrel Length: 24"  LOP: 330-355 mm Twist Rate | Number of Grooves: 1 : 10 / 4 Trigger Pull Weight: 6–13,5 Stock: Synthetic Weight: 5.3kg A sport special that combines the cutting-edge CZ 600 platform with a sophisticated chassis from the world-renowned MDT brand. This Light Grey cerakote-finished model features an MDT Elite Pistol Grip, adjustable cheekpiece on an AR-15-style buffer tube, and MDT CCS stock with adjustable LOP via butt pad spacers. It also comes with a Picatinny rail, M-LOK mounting points and an Arca Swiss rail. A specially designed MDT AICS 10-round magazine, equipped with a proprietary CZ follower, ensures fully reliable feeding from the ejection port. With advanced ergonomics, a heavy profile cold hammer forged barrel, and an innovative single-stage, easy-to-adjust trigger mechanism, CZ guarantees sub-0,75 MOA accuracy (five-shot groups at 100 meters using match-grade factory ammunition). Made in CZ

categories:Sporting GoodsGuns

14603 impressions

1538 views

Brand new Non-restricted Gauge: .410 Gauge Action: Lever-Action Chamber: 2-1/2" Capacity: 4+1 Front Sight: Blade (Fixed) Rear Sight: Picatinny Rail Barrel Length: 20" Threaded Stock: Fixed Synthetic Handguard: M-LOK Rail Overall Length: 41" Weight: 7.1 lbs. External Hammer/Striker Blade Front Sight Blued Barrel/Black Finish Picatinny Rail Coming with: 3 Chokes Made in Brazil

categories:Sporting GoodsGuns

13149 impressions

1068 views

**Price reduced** There's less than 20 rounds through this! 12" threaded barrel, side loading gate, picatinny rail, ghost ring, fiber optic front sight. Excellent used condition! Pick-up preferred. May consider delivery around Edmonton

categories:Sporting GoodsGuns

9526 impressions

986 views

Brand new Non-restricted Caliber: .44 Mag Capacity: 8 Rounds Action: Lever Action Safety: Thumb Safety Front Sight: Drift Adjustable Rear Sight: Peep Hole Sight on picatinny rail Barrel Length: 16.5" Threaded Barrel / Frame Finish: Black Cerakote Barrel / Frame Material: Alloy Steel Twist Rate: 1:30" RH Stock: Walnut (Black Cerakote) Overall Length: 33.7" Overall Height: 7.8" Overall Width: 1.5" Weight: 6.0 lbs. Made in Brazil

categories:Sporting GoodsGuns

6807 impressions

637 views

Brand new Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits LMG and M models. Does not fit SA, SE and SR. Includes installation instructions, hex keys and spare set of hardware.

categories:Sporting GoodsGuns

3233 impressions

524 views

Brand new Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits SA and SE models. Does not fit LMG and SR. Includes installation instructions, hex keys and spare set of hardware.

categories:Sporting GoodsGuns

3893 impressions

566 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11821 impressions

474 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11206 impressions

394 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10268 impressions

393 views

Brand new The Bushnell AR Optics Rush is a hi-rise mount with built-in laser sight for close quarter environments. The integrated, offset laser saves space on the rifle, and projects a continuous, powerful red beam with one push of a button. It replaces your existing mount, and is compatible with any optic that can be mounted on a picatinny rail. Offset laser Easy battery replacement One-button operation Waterproof Color: Black Battery Type: CR2 Batteries Included: Yes Laser Color: Red Output: <5mW

categories:Sporting GoodsGuns

1498 impressions

336 views

Brand new The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts feature two separate side clamps and allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount. 10-degree wedge included 0 MIL/0 MOA Height: 38 mm/1.5” Clearance: 7 mm/.27" (from the bottom of the tube to front of bridge of the mount body) Length: 141 mm/5.55” Weight: 154 g/5.4 oz Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

7169 impressions

423 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10948 impressions

466 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6264 impressions

614 views

Brand new Five-Position Forend Pistol Grip Ergonomic Design Textured Grip Gives You Extra Support & Stability When Shooting Installs Onto a Standard Picatinny Rail (Not Included) DuPont Extreme Temperature Glass Reinforced Polymer Matte Black Fits: Standard Picatinny rails Limited Lifetime Warranty Made in USA

categories:Sporting GoodsGuns

2445 impressions

452 views