Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:Sporting GoodsGuns

29246 impressions

1135 views

The word Paragon means, “a model of excellence”. And this is true of this optic series. I see the Paragon as being the technological descendant of the old Bellorussian PK-AS sight, a one power prism sight that through innovative use of lenses, seems to have a nearly non existent edge when you look through it. Thick opaque edges serve only to limit situational awareness. Competing brands and their prism sights are a miss due to large knobs… they are “good enough”. But the nearly invisible edge of the PK-AS and later on the Paragon discarded the idea that “good enough” was actually “good enough” in regards to situational awareness. Unlike the PK-AS, the Paragon is designed to be small and light. All Paragon models also boast the best eye relief when ranked against competing micro prism sights. -------------------------------------------- Vector Optics Paragon x1 The design of he Paragon x1 is as low profile as possible. No opaque protrusions to reduce situational awareness. Controls, windage and elevation adjustments are close to the body of the optic. It is ideal for someone wanting a close quarters optic but not wanting to be at the mercy of batteries. In the cold Canadian climate there is some wisdom in avoiding something battery dependent in the outdoors. The one power paragon has a circle dot reticle which, according to gestalt psychology, draws the eye quickly to the center. It is a reticle type which is faster to acquire than a dot or a crosshair. The Paragon x1 comes with a low mount and a high mount to be optimized for a large variety of firearm types, from the traditional Mossberg shotgun to the 180C. Caliber Range (max): 12ga, 338. Ideal For: Shotguns, PC9, SKS, FX9, Scorpion, Raven 9, Templar, wk180, ws-mcr, tavor -------------------------------------------- Vector Optics Paragon x3 The design of he Paragon x3 is as low profile as possible. No opaque protrusions to reduce situational awareness. Controls, windage and elevation adjustments are close to the body of the optic. The 3 power prism sight is ideal as a battlesight for modern sporting rifles as the 3 power gives a flexibility at close, medium and occasionally longer ranges quite comfortably. 3 power, in my opinion, is the maximum magnification your brain can resolve with 2 eyes open style shooting. 3 power is ideal for people expecting to engage targets at 300 meters or closer. The x3 Paragon is lightweight and small measuring 3" in length weighing only 225g. The reticle has a drop compensator for 223 balistics. Caliber Range (max): 12ga, 338. Ideal For: FX9, Scorpion, Raven 9, Templar, wk180, ws-mcr, tavor, crypto -------------------------------------------- Specter Arms is a dealer for Vector Optics and the x1 Paragon is not the only thing in stock. Red dots, scopes and micro reflex sights are all available on the website. Send a text to 7809079585 for more info. Do you need to outfit your family or survival group? Ask about bulk discounts on multiple quantities of the same product. Maybe you need something a bit more for competition? Check out my ad for red dot and reflex optics. Please click on my user name for other ads and shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

136694 impressions

3858 views

BARSKA Scope 3-9 x 40. New Condition. Never mounted also, no mounting hardware. Asking $65.00 OBO

categories:Sporting GoodsGuns

4569 impressions

617 views

2x7 scope. 11" long. In good condition. Yes it works, my husband just decided that he didn't want a scope on one of his guns anymore. No mounting hardware for it though. Asking $50. Located in Killam Alberta. Just east of Camrose.

categories:Sporting GoodsGuns

59084 impressions

4731 views

New , wheeler scope base rings for savage 110 long action rifle Description Rugged 1 Piece Bolt Action Scope Mount with Integrated Anti-Cant Indicator Features & details SPECS: This Wheeler 1-piece bolt action scope mount with 34mm rings in extra high height is compatible with Savage 110 long action rifles. Base features 6-40 threads ACCURATE: Finding the right height can help make your rifle more accurate. With 20 MOA, Wheeler 1-piece bolt action scope bases help zero in sights for shooting long distances. CONVENIENT: Installation is easy with a 1-piece scope base. The flip-down anti-cant device can be posted on the front or rear ring to ensure a level mount. DURABLE: A 6061 aluminum matte black base makes for a solid, yet lightweight design. Clamping force is increased with a 6-hole ring design. EXPLORE: Caldwell offers a variety of 1-piece scope bases, including: Remington 700 short action, Remington 700 long action, Savage 10, and Savage 110 models. Get the perfect mount with Wheeler 1 Piece Bolt Action Scope Mounts. Made of 6061 aluminum, the 6 hole ring design features a swing out anti-cant level for a level scope mount every time. Designed to work with the Remington Model 700 LA/SA and Savage 10/110, these 1 piece scope mounts are available in 1”, 30mm, and 34mm ring sizes. Measures at 20 MOA elevation in base.

categories:Sporting GoodsGuns

32072 impressions

1513 views

A Sako Heavy Barrel Target Rifle, all Factory Action. Nikon Rimfire .22 4 to 12 by 40 Brand New Mounted On Rifle Ready To Shoot. info on scope by manufacter Specifications Product Information Finish Matte Black Waterproof Yes Weight 14.3 Ounce Tube Diameter 1" Power Variability Variable Minimum Power 4 Maximum Power 12 Adjustment Click Value 1/4 MOA Adjustment Type Click Exposed Turrets No Finger Adjustable Turrets Yes Turrets Resettable to Zero Yes Zero Stop No Turret Height Low Fast Focus Eye Piece Yes Lens Coating Fully Multi-Coated Warranty Limited Lifetime Rings Included No Sun Shade Included No Lens Covers Included No Reticle Reticle Construction Wire Illuminated Reticle No Reticle Focal Plane Location 2nd Parallax Adjustment Fixed Fog Proof Yes Shock Proof Yes Overall Length (A) 14.1 Inches Objective Diameter (G) 1.98 Inches Eyepiece Diameter (H) 1.73 Inches Objective Lens Diameter 40 Millimeter Eye Relief 3.7 Inches Exit Pupil Diameter 10.3 - 3.3 Millimeter Field of View @ 100 Yards Minimum Power 23.6 Feet Field of View @ 100 Yards Maximum Power 7.3 Feet Maximum Windage Adjustment 60 MOA Maximum Elevation Adjustment 60 MOA Custom Fiberglass Stock Also with Pad. Shoots Awesome!!!. Price Is FIRM!!! With The Brand New Nikon Scope Included. And DO NOT ASK TO JUST BUY THE SCOPE!!! The Scope And Rifle Will Only BE Sold As ONE. Emails Are The Best Way To Contact Me For Any Information. Beautiful Gun To Shoot. Thanks Gene

categories:Sporting GoodsGuns

135904 impressions

11306 views

Bushnell XRS II rifle scope 4.5-30 x50 mm ED Glass EXO Barrier glass G3-I reticle 34 mm tube illuminated reticle SPURH 34 mm scope mount 1 piece Tenbrex scope caps 34mm scope tube level

categories:Sporting GoodsGuns

2610 impressions

421 views

Brand new Scope includes Eagle vision mounting Bracket with hardware. The scope is brand new and never been mounted. $900 obo

categories:Sporting GoodsGuns

1411 impressions

421 views

X bolt browning riffle and 4.5x14x40mm bushnell scope. Mounted and sighted. Riffle is 7mm short mag Great condition. Used once a year for hunting season. Upgraded the riffle and scope so no longer need. Will sell separately. Located red deer Must see pal for purchase.

categories:Sporting GoodsGuns

6176 impressions

569 views

Brand new The JULIET4 4x Magnifier is designed to work as a stand-alone magnification solution or in conjunction with reflex optics. This family of magnifiers is an excellent choice for transitioning from close quarters to intermediate ranged targets. In conjunction with a reflex optic, the JULIET4 can be adjusted for height through the use of spacers. It has a PowerCam 90° Mount so it can be quickly flipped to the side for more immediate, close quarters scenarios or deployed rapidly to bring targets four times closer. Its quick release mount comes with built-in recoil lugs for repeatable zero. The JULIET4 has a front and rear thread-in lens protector to keep it secure from the elements. ROMEO4H FEATURES: Designed for modern pistols, MSR platforms and shotguns Comes standard with solid and see-through lens covers and quick release mount Ballistic Circle-Dot and Ballistic Circle QuadPlex options Users can select from 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds) 50,000+ hour battery life and the readily available CR2032 battery is side loading for quick battery replacement. Unlimited to acquire aiming point and target, regardless of eye position behind sight. MOTAC (Motion Activated Illumination) powers up or down when sensing motion Uses an ultra-efficient red LED illumination for daylight visibility and extended runtime True QR mount and low mount included Strong, lightweight aircraft-grade CNC aluminum housing Waterproof, IPX-7 rated, and fog-proof. JULIET4 Features: Aircraft grade CNC aluminum housing ensures a lifetime of reliable service. IPX-8 rated for waterproofing — up to 20 meters for 1 hour Dialectic coated prism size and weight Objective thread-in lens cover and ocular slip-on, flip-back lens cover included Backed by an Infinite Guarantee™

categories:Sporting GoodsGuns

5532 impressions

418 views

Custom 7mm comes with vortex HST 6-24x50 scope Standard rem 700 action with a aftermarket extractor, benchmarks m5 barrel 1:8 twist 24” long. Has two detachable magazines, magazines hold 3. Has 20moa rail Has long mount scope rings Gun shoots amazing, and has been kept in great shape

categories:Sporting GoodsGuns

6002 impressions

578 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

8597 impressions

609 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11810 impressions

472 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11197 impressions

393 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10259 impressions

392 views

Brand new The Bushnell AR Optics Rush is a hi-rise mount with built-in laser sight for close quarter environments. The integrated, offset laser saves space on the rifle, and projects a continuous, powerful red beam with one push of a button. It replaces your existing mount, and is compatible with any optic that can be mounted on a picatinny rail. Offset laser Easy battery replacement One-button operation Waterproof Color: Black Battery Type: CR2 Batteries Included: Yes Laser Color: Red Output: <5mW

categories:Sporting GoodsGuns

1498 impressions

336 views

Brand new The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts feature two separate side clamps and allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount. 10-degree wedge included 0 MIL/0 MOA Height: 38 mm/1.5” Clearance: 7 mm/.27" (from the bottom of the tube to front of bridge of the mount body) Length: 141 mm/5.55” Weight: 154 g/5.4 oz Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

7166 impressions

422 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10938 impressions

465 views

Brand new The M-LOK Extended Cantilever Scout Mount provides forward light positioning to minimize shadowing effects The extended cantilever design is low profile and optimized for Magpul MOE SL, Zhukov and MOE M-LOK Shotgun forends as well as compatible aluminum M-LOK handguards It fits Surefire, Scout Light and Streamlight and ProTac rail lights It directly mounts to M-LOK compatible systems and includes cammed t-nuts, recoil/impact mitigation lugs and has backwards MOE compatibility with optional adapters *Note: NOT compatible with SureFire DS00 Dual Activation Switch or M600DF Scout Light The Scout Mount will not properly fit Bushmaster ACR Hand Guards *The MOE Scout Mount is optimized for rifles with a factory A2 front sight base Rifles with a railed gas block and folding front sight may have clearance issues depending on the size/shape of the gas block, sight, and installed light Made in USA

categories:Sporting GoodsGuns

3654 impressions

429 views

Scope Weight:20.4 oz Scope Length:10.5 inches Magnification Range:1x – 10x Scope Objective Diameter:28mm Scope Tube Size / Mount:34mm Turret Adjustment (Click Value):0.5 MOA Elevation Turret Details: Capped 0.5 MOA per click Windage Turret Details: Capped 0.5 MOA per click Reticle Position: Second focal plane Reticle Details:MSR-BDC10 reticle Eye Relief:3.22-3.54 inches Illuminated Reticle:Yes – 11 levels Package Includes: Battery Allen wrench Manual Lens cloth Alpha-MSR cantilevered scope mount Scope Finish: Black Scope Turret Rotation: Counter Clockwise (CCW) Designed by Sig Sauer Assembled in China

categories:Sporting GoodsGuns

7639 impressions

583 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6261 impressions

614 views