Browning BAR rifle, 270 Win caliber. Made in Belgium, has 22 inch barrel, traditional stock, polished blued steel barrel. This rifle is in a good condition overall, was recently cleaned and serviced at Sights and Arms Gun Shop in St. Albert. Additional clip/ magazine is included. Comes with 3.5x10x40mm Leopold Vari X III scope, which is in very good condition. Valid PAL is required. Local pick up is prefered. Asking $1,900. Please call or text 780-243-6475 if interested.

categories:Sporting GoodsGuns

5236 impressions

414 views

Winchester 1892 16" big loop .357 Magnum Lever, Some light finish scratches on receiver, Some wear from Saddle Ring on opposite side on finish. Overall Amazing Condition not mint as it has been fired although minimally. Hoping for $1900 OBO Rossi 16" 92 series .357 Magnum Lever in Amazing Shape on one press mark on fore stock on wood. Finish is as from Factory. Hoping for sold Willing to take a Winchester 1892 16" Deluxe in .357 magnum, Breakdown rifle in Trade. I will add cash to that deal. Willing to take Cash, Gold coins or bars on trade against Rifles.

categories:Sporting GoodsGuns

8250 impressions

1362 views

Excellent condition, blueing is like brand new. Shoots tight 1/2 MOA. Custom fit limb saver recoil pad. Comes with a Sightron STAC 3-16x42 scope, tracks very well. Have approximately 103 rounds of ammunition to go with it. Need to see it to appreciate the condition of this rifle. It is a BBR not a BAR.  Proof of PAL required 

categories:Sporting GoodsGuns

1612 impressions

85 views

Browning BAR Mark II Safari semi-automatic with BOSS muzzle brake system, 30-06 sprg caliber, 22 inches barrel, traditional stock, polished blued steel barrel and engraved receiver, select gloss walnut stock, rounded forearm. This rifle is in a mint condition, no scratches, no dents, no dings, no discoloration, zero issues. ***Scope is not included*** Action Length: Long Action Caliber: 30-06 SPRG Barrel Length: 22" Overall Length: 43" Length of Pull: 13 3/4" Drop at Comb: 3/4" Drop at Heel: 1 1/8" Weight: 7 lbs. 14 oz Magazine Capacity: 4 Twist Rate: 1:10" Barrel Finish: Polished Blued Stock Finish: Gloss Wood Grade: Grade I Receiver Finish: Polished Blued Chamber Finish: Chrome Plated Chamber Barrel Material: Steel Barrel Contour: Sporter Stock Material: Turkish Walnut Recoil Pad: Polymer Checkering: Cut 18 LPI Sling Swivel Studs: Steel Integral Receiver Material: Steel Trigger Finish: Gold Plated Magazine Type: Hinged Floorplate with Detachable Box Trigger Material: Alloy Trigger Guard Material: Alloy Trigger Guard Engraving: Buck Mark in Gold Floor Plate Material: Alloy Drilled and Tapped for Scope: Yes In order to purchase this rifle, must comply with the law, I am required by law to see possession of firearms license, validation of firearms license with RCMP date of birth and Email is required. I am willing to ship Canada wide at buyers expense.

categories:Sporting GoodsGuns

45572 impressions

2113 views

Selling my beautiful Browning B.A.R Mk3 Stalker chambered in .308 win. I've developed a thing for setting up rifles and then selling them to try something new. This one has a Primary arms SLx 1-6x24 SFP LPVO sitting in Vortex pro series rings on a Browning picatinny rail base. It's has a UTG recon  360 7"- 9" bipod that is rock solid and all aluminum construction. This rifle only has 6 rounds through it and shows as new. 

categories:Sporting GoodsGuns

19373 impressions

1540 views

Henry Big Boy Mare’s 45 Colt 12.9″ Octagon Lever Action Rifle Basically new, no scratches or dents, was only fired around 10 rounds to try and almost no recoil. Feel free to ask and watch the video from youtube for reviews. Comes with a box of .45 LC 250 GR (50 rounds) Link: https://youtu.be/q40Q3pT5Jng?si=4lqfsjBY6sWBeCC3 SPECIFICATIONS: ·         Barrel Length: 12.9″ ·         Barrel Type: Octagon Blued Steel ·         Rate of Twist 1:16 ·         Overall Length: 25″ ·         Weight: 5.79 lbs. ·         Receiver Finish: Polished Hardened Brass ·         Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert ·         Front Sight: Brass Bead ·         Scopeability: Drilled and Tapped ·         Scope Mount Type: BB-RSM ·         Stock Material: American Walnut ·         Buttplate/Pad: Brass ·         Length of Pull: N/A ·         Safety: Transfer Bar ·         Best Uses: Target/Collector . Embellishments/Extras: Large Loop Lever, Saddle Ring, Side Loading G

categories:Sporting GoodsGuns

4291 impressions

365 views

**SOLD** Detailed ad, please read before messaging.  Cross posted on GunPost with a Five Star rating and reviews.  Deal with confidence. Please include phone # and/or your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a new Savage Mark II FVT bolt action 22LR, the 21” heavy carbon steel barrel is button rifled and weighs 6lbs. It has a Peep Sight with changeable front sight inserts (see pic), user adjustable accutrigger, and a 5rd detachable magazine. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** First Paid, First Served.
 Holds only with deposit. Delivery Negotiable. 
 Buyer pays for shipping costs and makes arrangements for payment. MANUFACTURER DESCRIPTION Raising the bar in 22 LR performance, the Savage Arms Mark II FVT offers user-adjustable AccuTrigger technology for crisp, customized trigger pulls. The 21-inch, heavy carbon steel barrel is button rifled and paired with a rugged, matte black synthetic stock. Weighing 6 pounds, the rifle has a 5-round detachable box magazine and peep sights. FEATURES * Button-rifled, 21-inch heavy carbon steel barrel * Rugged, black matte synthetic stock; peep sights * 22 LR chambering; 5-round detachable box magazine SPECIFICATIONS SKU - 28800 Purpose - Small Game, Target Shooting Barrel Contour - Varmint Barrel Finish - Matte Barrel Length - 21" (53.34 cm) Barrel Material - Carbon Steel Rate of Twist - 1:16" Barrel Threaded - No Pistol Grip - No Interchangeable Grip Panel - No Magazine Capacity - 5 Magazine Release - Ambidextrous Receiver Material - Carbon Steel Feed Type - Detachable Box Magazine Sights - Front Metal Sights - Rear Metal AccuStock - No Stock Pull Length - Min. 13.9" (35.31 cm) Stock Pull Length - Max. 13.9" (35.31 cm) Stock Material - Synthetic Stock Type - Varmint AccuTrigger - Yes Trigger Adjustable - Yes Trigger Pull Force - Min. 2.5 lbs (40 ounces) Trigger Pull Force - Max. 6 lbs (96 ounces) Length - 39.75" (100.97 cm) Weight - 6.12 lbs (2.78 kg)

categories:Sporting GoodsGuns

21802 impressions

562 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 . 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 . 4) Cooey Elevator - .075" x 1.21" - $15 . 5) Husqvarna Elevator - $45 . 6) Marble Double Step - Rifle Elevator - $35 . 7) Marble Double Step - Carbine Elevator - $35 . 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 . 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 . 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD . 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 . 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD . 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 . 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD . 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 . 17) Savage Fishhook Elevator - $40 . 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD . 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 . 21) Savage 24 Elevator (Replacement Style) - SOLD . 22) Win Early Elevator - $40 . 23) Winchester 1A Elevator - dated (.207") - $60 . 24) Winchester 1B Elevator - dated (.162") - $60 . 25) Winchester 1C Elevator - no date (.175") - $60 . 28) Win 2C Elevator - .60"W x 1.625"L - $35 . 29) Winchester 3C - 6S Elevator - $50 . - . 31) 6-48 Filler Screws (4) - Blue $20.00 . 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 . 33) 6-48 Filler Screws (4) - Stainless $20.00 . 34) 8-40 Pan Head Filler Screws (2) $20.00 . 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 . 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 . - . 40) Husqvarna Front Sight Hood - $85 . 41) Marlin pre 72 Round Front Sight Hood - $45 . 42) Marlin post 72 Front Sight Hood - $60 . 43) Sako - Finnwolf Hood - $85 . 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD . 45) Parker Hale Front Sight Hood - $85 . 46) Browning (Belgium) Safari Front Sight Hood - $85 . 47) Winchester Model 9422 Front Sight Hood - $40 . 48) Winchester post 64 Model 94 Front Sight Hood - $40 . 49) Winchester pre 64 Model 94 Front Sight Hood - $40 . 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 . 51) Winchester post 64 Model 70 Front Sight Hood - $75 . 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 . 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

229323 impressions

3021 views

11-87 12 gauge camo 3 inch. Please read the full ad before contacting me. This is a bit of a project gun. I bought it new in 2008 and shot it casually over the years with almost nothing but lead trap loads. Recently it developed a problem cycling the action after the shot. It will always fire. However, sometimes it will cycle the action, other times the action cycles half way and stops, and still other times it will not cycle at all. Sometimes it picks up a new shell and sometimes it won't. Sometimes is locks up and can only be freed by popping the barrel and the action bars out and re assembling it. I don't have the time or interest to look into it . It might be a simple fix who knows. I already bought a gun to replace it. This isI a package deal only. This includes the gun as it came from the factory, with 1 modified choke tube, a wrench, 27(?) Inch barrel. It will also come with a Remington 20 inch fully rifled 12 gauge barrel that has open sights. This barrel has 11 slugs through it and was used on 1 trip to shoot a moose. I will ship this gun on the buyers dime but I would much prefer a local sale so that the buyer can actually see the problems themselves. Text Jeff at 403 390 2570 for the fastest response. Located in Airdrie

categories:Sporting GoodsGuns

7547 impressions

935 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8416 impressions

574 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6265 impressions

614 views

Brand new Non-restricted Caliber:  .30-30 Win. Capacity: 4+1 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 16.5" Round Blued Steel, 5/8×24 Threaded Front Sight: Brass Bead Rear Sight: Fully Adjustable Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Ventilated Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:12 Overall Length: 35.5" Weight: 6.75 lbs. Made in USA

categories:Sporting GoodsGuns

1958 impressions

106 views

Brand new Non-restricted Caliber:  .30-30 Win. Capacity: 5 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 20" Round Blued Steel Front Sight: Brass Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:12 Overall Length: 39" Weight: 7.00 lbs. Made in USA

categories:Sporting GoodsGuns

1820 impressions

90 views

Brand new Non-restricted Caliber: .223 Remington / 5.56 NATO Capacity: 5 Action: Lever Action Safety: Transfer Bar Receiver Finish: Hard Anodized Black Barrel: 16.5" Round Blued steel Front Sight: None Rear Sight: None Scopeability: Picatinny Rail Included Scope Mount Type: Rings/Mount for Standard Picatinny Rail Stock Material: Birch Laminate Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:9 Overall Length: 37" Weight: 7.0 lbs. Made in USA

categories:Sporting GoodsGuns

7670 impressions

478 views

Brand new Non-restricted Caliber: 45-70 Government Capacity: 4 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Industrial Hard Chrome Satin Barrel: 18.5" Round Hard Chrome Plated Steel Front Sight: Brass Bead Rear Sight: Full Length Picatinny Rail with Rear Peep Sight Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: Stained Hardwood Buttplate: Black Ventilated Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:20 Overall Length: 37.5" Weight: 7.08 lbs. Made in USA

categories:Sporting GoodsGuns

3818 impressions

227 views

Brand new Non Restricted Caliber: .44 Mag. Capacity: 5 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Polished Hardened Brass Barrel: 12.9" Octagon Blued Steel Front Sight: Brass Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: American Walnut Buttplate: Brass Length of Pull: N/A Rate of Twist: 1:20 Overall Length: 25" Weight: 5.79 lbs. Made in USA

categories:Sporting GoodsGuns

6065 impressions

466 views

Brand new Non-restricted Caliber: 30-30 Winchester Capacity: 5+1 Action: Lever Action Safety: Transfer Bar Finish: Blued w/ hardened brass receiver Barrel: 20" Round Blued Steel Front Sight: Ramp w/ .062" Ivory Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scope ability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Brass Length of Pull: 14" Rate of Twist: 1:12 Overall Length: 38.3" Weight: 7.5 lbs. Made in USA

categories:Sporting GoodsGuns

8101 impressions

430 views

Brand new Non-restricted Caliber:  .44 Magnum Capacity: 7 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 17.4" Round Blued Steel Front Sight: Fiber Optic Rear Sight: Fully Adj. Fiber Optic Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: Black Synthetic Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 36.3" Weight: 7.3 lbs Made in USA

categories:Sporting GoodsGuns

5938 impressions

327 views

Brand new Non-restricted Caliber: 357 MAG/.38 Special Capacity: 7 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 17.4" Round Blued Steel Front Sight: Fiber Optic Rear Sight: Fully Adj. Fiber Optic Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: Black Synthetic Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 36.3" Weight: 7.3 lbs Made in USA

categories:Sporting GoodsGuns

13723 impressions

659 views

Brand new Non-restricted Caliber: .357 Mag. Capacity: 10 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Industrial Hard Chrome Satin Barrel: 20" Round Hard Chrome Plated Steel Front Sight: Brass Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: Stained Hardwood Buttplate: Black Ventilated Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 37.5" Weight: 7.00 lbs. Made in USA

categories:Sporting GoodsGuns

15162 impressions

910 views

Left handed Browning semi automatic 300wsm 8/10 condition. Beautiful rifle. Mounts and rings with an older Leopold scope. No trades Can and will ship on buyers dime. No cod Must have valid Pal

categories:Sporting GoodsGuns

15950 impressions

1632 views