Accurate in Alberta

Browse ammo, gun accessories, parts, as well as new and used non-restricted and restricted firearms for sale in Alberta.

Popular search terms:

Photo of Great Deal! Savage 10 Law Enforcement Edition for sale
$1600
Great Deal! Savage 10 Law Enforcement Edition for sale
Hello everyone. I have for sale a Savage 10 Law Enforcement Edition in .308 that has been my go-to hunting rifle for the last 3 years. It has a cheek riser, directional muzzle break, 24 in heavy fluted barrel, 20 MOA rail, long range scope with heavy duty hand lapped rings, 2 proprietary Savage magazines,an extra rubber butt pad to reduce recoil even more, 3 position safety and tactical bolt knob. The stock is with the bedded aluminum chassis for rigidity and precision. The AccuTrigger is adjusted at 2 lb. This is a very very accurate rifle. Here are some bullets tested with a 3 shot group at 100 yards: Sako powerhead blade 162 gr - 0.4 in Herters soft point 150 gr -0.45 in Federal berger hybrid hunter 168 gr - 0.48 in Sellier & Bellot soft point 180 gr - 0.48 in Norma soft point 150 gr - 0.74 in Sako superhammerhead 180 gr - 0.8 in Did load development for it with Barnes TTSX 130 gr and obtained 0.35 in at 100 yards . The scope is a SKW Optics 5x30x56 FFP in 0.5 MIL/click. The scope is high quality and tracks well. It s a 34 mm tube with lots of internal adjustment. It comes with everything already done and researched. You don t have to do anything.The rifle was $900 ,scope was $700 muzzle break $100 ,butt stock pad $40, scope rings $100,scope rings handlapping $50, extra magazine $100,trigger adjustment $50. The rifle is ready to shoot. Doesn't need anything. About 300 rounds through it. Currently sighted at 300 yards. Sold as a package since the scope rings are hand lapped for this rifle. No lowballers. Gun case not sold with the rifle. Willing to ship at owner's expense about $70. Thanks 
categories:GunsSporting Goods
35247 impressions
1478 views
Calgary, AB2 years ago
Photo of Brass Casing Processing and Ammunition Reloading Business
$38000
Brass Casing Processing and Ammunition Reloading Business
For Sale $38,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $38,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area
categories:GunsSporting Goods
5292 impressions
861 views
Stony Plain, AB2 days ago
Photo of Brand new EOTECH EXPS3-1 1MOA Dot with QD Mount-TAN $920
$920
Brand new EOTECH EXPS3-1 1MOA Dot with QD Mount-TAN $920
Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.
categories:GunsSporting Goods
5171 impressions
493 views
Calgary, AB1 week ago
Photo of Brand new Sig Sauer SOR31002 Romeo 3 Miniature Reflex Sight With Riser 1x25mm 3 MOA Red Dot Reticle Graphite Finish $620
$620
Brand new Sig Sauer SOR31002 Romeo 3 Miniature Reflex Sight With Riser 1x25mm 3 MOA Red Dot Reticle Graphite Finish $620
Brand new When you need fast and accurate target acquisition, choose the Sig Sauer Romeo3 Mini Waterproof 1x25mm Reflex Sight to maintain a consistent zero shot after shot. The compact size of these Red Dot Sights from Sig Sauer allows low or co-witness mounting. Each unit is CNC-machined from aircraft grade aluminum for lightweight strength. The Sig Sauer Romeo3 Mini Fogproof 1x25mm Reflex Sight is equipped with MOTAC (Motion Activated Illumination) to power off when the unit isn’t moving to save battery power, yet still remember your last brightness setting next time you turn it on. Spectracoat lens coatings and 11 illumination settings combine to give you ultra clear daylight and night vision images from the Sig Sauer Romeo3 Lightweight 1x25mm Mini Reflex Sight. Specifications: Magnification:1x Objective clear aperture:25mm Objective diameter:25mm Material:Aircraft grade CNC Aluminum Reticle:3 MOA DotAdjustment increments:1 MOA Elevation/windage adjustment range:100 MOA Color:Graphite Battery:CR2032 Weight:1.4 oz. Length:2.4 in. MOTAC motion sensing technology immediately powers up illumination when it senses motion and powers down when it does not, to extend battery life. Spectracoat ultra wide broadband anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum, providing superior light transmission. Stealth ID deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering. Proprietary red-notch coating ensures a bright red dot Maintains confident zero 9 daytime illumination settings 2 night vision illumination settings Unlimited eye relief Side-loading battery so batteries can be replaced without removing unit from firearm IPX-7 waterproof rating for complete water immersion up to 1 meter Fogproof
categories:GunsSporting Goods
4777 impressions
438 views
Calgary, AB1 week ago
Photo of Brand new EOTECH EXPS3-1 1MOA Dot with QD Mount-Black $930
$930
Brand new EOTECH EXPS3-1 1MOA Dot with QD Mount-Black $930
Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.
categories:GunsSporting Goods
4668 impressions
374 views
Calgary, AB2 weeks ago
Photo of Brand new TRIJICON ACCUPOINT TR23-1G 5-20X50 STD Crosshair W/ Green Dot Scope $1500
$1500
Brand new TRIJICON ACCUPOINT TR23-1G 5-20X50 STD Crosshair W/ Green Dot Scope $1500
Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)
categories:GunsSporting Goods
7050 impressions
465 views
Calgary, AB2 weeks ago
Photo of Steambow AR-6 Stinger II Tactical Repeating Crossbow Pistol $430
$430
Steambow AR-6 Stinger II Tactical Repeating Crossbow Pistol $430
Introducing the AR-6 Compact Tactical Magazine Fed Crossbow. Developed by Steambow Austria, the AR-6 Stinger II uses a top-fed 6-shot magazine. The crossbow splits at the rear with the stock acting as a lever to draw the string, making actuation quick and easy. The fiber optic sight allows fast and intuitive aiming, while a red dot sight or scope can be attached to the front Picatinny rail for even more accurate shots. The AR-6 also features an internal accessory slot for use of an optional laser device. Made of high-quality reinforced polymer, the AR-6 Stinger II is extremely lightweight, rugged, reliable, and accurate to target at distances up to 80 feet. The AR-6 is easily disassembled and can compactly fit into a survival or bug-out bag. Weighing in at just 2.6lbs the AR-6 is easy and convenient to use and transport. The compact dimensions and light weight also make the AR-6 ideal for beginner and smaller statured shooters. Coming with: Vertical foregrip Telescoping AR-15 style buttstock (commercial-spec buffer tube) 6 training arrows 2 strings Stringing aid and manual. Note: Because these crossbows are over 500mm in length and are not designed or altered to be aimed and fired by the action of one hand (handgun style) they are not prohibited class and therefore non-regulated items. No PAL required. Features: •Open sights (rear sight & front sight) on top of the magazine •Top Picatinny rail for red dot sights •Full-length Picatinny rail on the bottom for foregrip or tactical light •Integrated accessory compartment for integral laser sight •2 external ports for attaching side picatinny rails
categories:Guns
11542 impressions
1016 views
Calgary, AB1 month ago
Location
Find places in Alberta within
of
auction, garage sale, or moving sale

Having a garage, estate, or yard sale?

Create an ad event to promote an auction, garage sale, or moving sale.

Item Type
Firearms112Optics7Parts6Ammunition4
Gun Type
Rifle31Other7Handgun5Shotgun2Replica-or-Deactivated1
Action
Bolt79Semi-automatic16Single-shot9Lever6Revolver3Pump2Automatic1Triple-barreled1
Caliber