Brand new Lifetime Warranty Color: Black Finish: Type III Hard Coat Anodized Fabric/Material:6061-T6 Aluminum Magnification:1 x Objective Lens Diameter:23 mm Reticle:2 MOA Dot Illumination Type: LED Illumination Color: Red Brightness Settings:6 Eye Relief: Unlimited Adjustment Type: MOA Adjustment Click Value:1 MOA Parallax:50 yds Lens Material: HD Glass Optical Coating: Fully Multi-Coated Light Transmission:99.5 % Attachment/Mount Type: Picatinny Battery Type:CR2032 Battery Quantity:1 Battery Life:40000 hours Water Resistance Level: Waterproof Shockproof: Yes Fogproof: Yes Length:2.48 in Width:4.6 in Height:3.5 in Weight:3.5 oz Included Accessories: Flush mount Magnification Type: Fixed Adjustment Range:120 MOA Assembled in EP-Level Clean Room 100% Waterproof, Fog proof and Shockproof (tested up to 1200 Gs) Aircraft Grade Aluminum with Rugged Design Ready for the Toughest Environments Full Wide Band Low Light Enhancement Six Levels of Red Illumination, Featuring On/Off Between Each Level

categories:Sporting GoodsGuns

2755 impressions

496 views

Brand new The KRISS Vector Ambidextrous Folding Stock Adapter for GEN II 2017 is constructed of hard coat anodized aluminum and steel and allows for the attachment of AR-15 type buffer or pistol arm brace tubes. The adaptor can be configured to fold to either the left or right side with only a few tools in a matter of moments. This part is only compatible with the Gen 2.1 (Gen 2-2017) Vector which does not have the original hinge mount. This part is incompatible with the Gen 1 and Gen 2 (hinged) Vector. One end of the adapter attaches directly into the Gen 2.1 Vector's upper housing. The other end features threading that will accept an AR buffer tube or pistol tube. SKU: KVA-FSABL00

categories:Sporting GoodsGuns

3111 impressions

421 views

Brand new The M-LOK Extended Cantilever Scout Mount provides forward light positioning to minimize shadowing effects The extended cantilever design is low profile and optimized for Magpul MOE SL, Zhukov and MOE M-LOK Shotgun forends as well as compatible aluminum M-LOK handguards It fits Surefire, Scout Light and Streamlight and ProTac rail lights It directly mounts to M-LOK compatible systems and includes cammed t-nuts, recoil/impact mitigation lugs and has backwards MOE compatibility with optional adapters *Note: NOT compatible with SureFire DS00 Dual Activation Switch or M600DF Scout Light The Scout Mount will not properly fit Bushmaster ACR Hand Guards *The MOE Scout Mount is optimized for rifles with a factory A2 front sight base Rifles with a railed gas block and folding front sight may have clearance issues depending on the size/shape of the gas block, sight, and installed light Made in USA

categories:Sporting GoodsGuns

3656 impressions

430 views

Brand new Shell carrier for the 12 gauge Remington 870 shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:Sporting GoodsGuns

7986 impressions

452 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2744 impressions

407 views

Brand new Matching a wide zoom range with a bright objective lens and a reticle rich in hold points, the Riton Optics 5-25×50 X5 Conquer MRAD Riflescope is a versatile optic for serious hunters and shooters. This one-piece aluminum scope features a first focal plane, Christmas tree-style illuminated PSR reticle and MRAD-based turrets for dialing in precise elevation and windage adjustments. The large objective lens admits enough light for good vision even in low-light conditions, and the sight picture is sharp and clear through HD glass and multiple layers of anti-reflective coating. Riton’s R5 zero stop turrets adjust impact point at 1/10 MRAD, with a 21 MRAD total adjustment range. Zooming is effortless with the removable throw lever, and the fast-focus eyepiece makes it easy to sharpen your view of the reticle. The X5 Conquer is waterproof, nitrogen-purged fogproof, and tested to withstand 1200 Gs of recoil. 5-25x zoom magnification 50mm objective diameter Fully multi-coated HD glass 22.5-4.5′ field of view at 100 yards First focal plane Christmas tree style Red illuminated with six brightness levels and off settings in between 1/10 MRAD per click impact point correction 21 MRAD elevation and windage adjustment ranges Side-focus parallax adjustment, 10 yards to infinity 3.7″ eye relief 34mm maintube One-piece CNC-machined aluminum housing Type III hard anodized matte black finish Exposed zero-stop turrets Fast focus eyepiece with knurled zoom ring and removable zoom ring throw lever Nitrogen purged, fogproof and waterproof

categories:Sporting GoodsGuns

3591 impressions

537 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2776 impressions

492 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 6 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:Sporting GoodsGuns

6250 impressions

489 views

Brand new The KRISS Vector Ambidextrous Folding Stock is the dedicated folding stock solution for the Vector Gen 2.1 (Gen II 2017). The stock is constructed of aluminum and advanced polymer composites. The KRISS Vector Ambidextrous Folding Stock secures to the upper assembly with a push button hinge that can be configured to fold to the right or the left. The stock features two QD sling swivel mounts on the left and right side, as well as a sling loop towards the rear. In addition to folding, this stock is also adjustable for length of pull, adjusting to three positions. One end of the stock is installed directly into the Gen 2.1 Vector's upper housing. The other end is the stock itself. It is not an adapter.

categories:Sporting GoodsGuns

3314 impressions

506 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6266 impressions

614 views

Holosun AEMS Multi-Reticle Green Dot Sight The AEMS 211301-Green (Advanced Enclosed Micro Sight) is a compact optical sight with 2x larger lens surface area than standard 20mm micro style sights for increased FOV. AEMS-Green is made from 7075 aluminum and includes a 1.63” dot height (lower 1/3 co-witness) Picatinny mount. FEATURES Large FOV in a Compact, Lightweight package Motion On with Last Setting Recall Up to a 50,000 Hour battery life Solar Failsafe™ Multi-Reticle System™ (MRS): 2 MOA Dot, 65 MOA Circle, Circle-Dot Shake Awake Technology™ Super Green LED In the Box : Lower 1/3 Co-witness Mount Multi Tool Clear Flip-down Len Covers User Manual CR2032 Battery Lens Cloth SPECIFICATIONS OPTICAL DATA Reticle 2 MOA Dot & 65 MOA Circle Light Wavelength 590nm Reticle Color Green Parallax Free Yes Unlimited Eye Relief Yes Magnification 1x Multi-Coatings Yes ELECTRONIC DATA Power Source Solar & Battery Battery Type CR2032 Battery Life (Hours) 50,000 Brightness Settings 8 DL& 4 NV PHYSICAL DATA Window Size 1.1 x 0.87 Dimension (in) 2,2 x 1.54 x 1.7 Weight (oz) 3.9 MECHANICAL DATA Housing Material 7075 T6 Aluminum Surface Finish Anodized Adjustment per Click 0.5 MOA W&E Travel Range ±50 MOA ENVIRONMENT DATA Storage Temperature -40℃~70℃ Working Temperature -30℃~60℃ Submersion IPX8 Vibration 1000G

categories:Sporting GoodsGuns

3621 impressions

607 views

Brand new When you need fast and accurate target acquisition, choose the Sig Sauer Romeo3 Mini Waterproof 1x25mm Reflex Sight to maintain a consistent zero shot after shot. The compact size of these Red Dot Sights from Sig Sauer allows low or co-witness mounting. Each unit is CNC-machined from aircraft grade aluminum for lightweight strength. The Sig Sauer Romeo3 Mini Fogproof 1x25mm Reflex Sight is equipped with MOTAC (Motion Activated Illumination) to power off when the unit isn’t moving to save battery power, yet still remember your last brightness setting next time you turn it on. Spectracoat lens coatings and 11 illumination settings combine to give you ultra clear daylight and night vision images from the Sig Sauer Romeo3 Lightweight 1x25mm Mini Reflex Sight. Specifications: Magnification:1x Objective clear aperture:25mm Objective diameter:25mm Material:Aircraft grade CNC Aluminum Reticle:3 MOA DotAdjustment increments:1 MOA Elevation/windage adjustment range:100 MOA Color:Graphite Battery:CR2032 Weight:1.4 oz. Length:2.4 in. MOTAC motion sensing technology immediately powers up illumination when it senses motion and powers down when it does not, to extend battery life. Spectracoat ultra wide broadband anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum, providing superior light transmission. Stealth ID deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering. Proprietary red-notch coating ensures a bright red dot Maintains confident zero 9 daytime illumination settings 2 night vision illumination settings Unlimited eye relief Side-loading battery so batteries can be replaced without removing unit from firearm IPX-7 waterproof rating for complete water immersion up to 1 meter Fogproof

categories:Sporting GoodsGuns

5713 impressions

501 views

Brand new The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Sporting GoodsGuns

2276 impressions

395 views

Brand new New SureFire Turbo Series handgun WeaponLight generates a tightly focused, 66,000-candela beam pattern Highly visible, integrated 5-milliwatt laser—available in red or green—helps you get on target quickly and accurately without requiring the use of your gun's iron sights Mounts securely to Universal rail-equipped or Picatinny rail-equipped handguns or long guns The Turbo Series version of our X400 handgun WeaponLight delivers a stunning 66,000 candela of intense, tightly focused, far-reaching white light with a hot spot that is tremendously effective, plus a highly visible laser—available in red or green—to help the user get on target quickly and accurately. You can count on the X400T-A to help you positively identify threats at extreme distances while also providing ample spill light to help you maintain situational awareness, and you can trust its laser to provide crucial visual guidance without acquiring your sights if you’re forced to respond from a non-standard shooting position. Ambidextrous switching provides one-finger control of momentary-on or constant-on activation. Its rugged, aerospace aluminum body is Mil-Spec hard anodized for scratch and corrosion resistance and seal Precision-engineered Turbo reflector delivers 66,000 candela of tightly-focused white light; the farthest-reaching beam of any SureFire X-Series handgun WeaponLight Choose the <5 mW / 635-nanometer red laser or <5 mW / 515-nanometer green laser. Both are visible to the human eye for rapid target acquisition from nonstandard shooting positions Integral ambidextrous momentary- and constant-on switching provides easy activation Attaches securely to both Universal and Picatinny accessory rails Weatherproof O-ring and gasket sealing ensure durability in rainy conditions High-strength aerospace aluminum body is Mil-Spec hard anodized for extreme durability Accepts optional pressure-activated DG and XT remote switches for precision control without altering grip on weaponke it weatherproof. The X400T-A delivers a standard of excellence you can trust with your life.

categories:Guns

3984 impressions

403 views

Brand new The MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Guns

2599 impressions

382 views

Brand new Mount Base Part Number: 1301 Recon (0 MOA) 1.5" The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages: Does not require proprietary tools for adjustment. Can be adjusted with your finger or a flat blade screwdriver. Lever can be configured to lock to the front or the rear. Superior clamping surface to insure maximum rail engagement. The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish. Precision machined from 6061 T6 Aluminum. Hard coat anodized for a lifetime of performance. Fully adjustable to fit both in spec and out of spec rail systems. American Defense MFG, LLC. products feature a lifetime warranty. Features the Patented QD Auto Lock Lever system. Made in USA

categories:Sporting GoodsGuns

3752 impressions

535 views

Brand new The M-LOK QD Sling Mount provides an alternate attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. Mounts to all M-LOK compatible hand guards and forends Accepts any push-button QD swivel as well as the Magpul QDM Machined from Mil-Spec annodized aluminum for durability and light weight Beveled edges reduce snagging Anti-rotation design prevents swivels from spinning

categories:Guns

2629 impressions

455 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2692 impressions

367 views

Brand new Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) Type 2 is designed to be as durable as the legendary ACOG. The RM01 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR Type 2 is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. The new Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications. Magnification:1x Bullet Drop Compensator: No Length: (in)45mm Weight: (oz)1.2 oz w/Battery Illumination Source: LED Reticle Pattern: 3.25 MOA Dot Day Reticle Color: Red Night Reticle Color: Red Bindon Aiming Concept: No Adjustment @ 100 yards (clicks/in): 1 Housing Material: Forged Aluminum Batteries: 1 CR2032 Lithium Battery Battery LifeUp to 2 years of typical use*, up to 5 years in dark storage. *When used at 70ºF (21ºC). Extreme temperatures (high or low) will affect lithium battery performance.

categories:Guns

5154 impressions

518 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

15431 impressions

1333 views

Brand new Compatible with 34mm Maintube 2″ Forward Cantilever Offset Height: 1.46″/37mm Quick Release Mechanism Mount on Picatinny/Weaver Rails Aluminum Construction Type III Anodized Finish Give your riflescope solid support using the EOtech 34mm PRS QD Cantilever Ring Mount. This cantilever adapter is compatible with 34mm maintubes and mounts on Picatinny or Weaver rails. It provides a 2″ forward offset for tailoring eye relief and head placement, and has a quick release mechanism for fast and easy attachment. The mount is made of aluminum with a Type III hard anodized finish and provides precision, stability, and strength when you attach your riflescope to your firearm.

categories:Sporting GoodsGuns

3570 impressions

595 views