The G2 literally flips conventional Chronograph technology upside down. By inverting the system, the G2 is capable of measuring in adverse light conditions making the measurements more accurate than conventional chronographs, even indoors. The light sensors were spaced 18” apart for more accuracy and the sunscreens have self-contained LED lights when a little extra light is needed. Collapsible and compact, the system is quick and easily deployed from its heavy duty storage case. Higher accuracy was achieved by using a high speed 48 MHz processor and by designing a circuit with an advanced data interface that allows each unit to be computer calibrated at the factory after assembly. The end result is the ability to provide much better accuracy than other chronographs on the market (+/- .25%) and measures from 5 to 9,999 FPS. Features 18” sensor spacing for maximum accuracy Each unit factory calibrated to within +/- 0.25% accuracy Built in LED Light Kit Heavy Duty Height Adjustable from 15-42 Tripod and Carry Bag Bluetooth to interface with Smartphone iOS and Android Compatible Rechargeable Lithium Ion Battery Ideal for Firearms, Archery, Airgun or Paintball Meters Per Second (MPS) or Feet Per Second (FPS) readings App displays velocity, logs data, notes, weather conditions and easily exports via SMS or Email

categories:GunsSporting Goods

3152 impressions

218 views

I have 2 OEM, SIG P226 mags never been used still in box. Price is each, shipping on buyer.

categories:GunsSporting Goods

2517 impressions

187 views

 Just found some shell holders,  in the back of the bottom drawer of my loading bench, for a Lee Hand Primer ( which I haven't had for over 30 years ), and which are no longer useful to me for reloading. There are only these six shell holders remaining ..... #s 1,3,4,12,14 & 18 complete with plastic case which has room for 6 more.   I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

5578 impressions

171 views

For Sale - Lee Precision 444 Marlin full length sizing 3 die - no crimp die included! Crimp die available in separate sale but can be added to purchase of die set for $40 more. If this ad is up then item is still available!  $90 – firm!  1 set available Brand new in box - Contains:  -full length sizing die  -expanding die  -bullet seating die  -powder scoop  -shell holder  -data, load chart, and instructions  -handy red box & Lee lubricant  EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada.  Small package/tracked, all provinces - $22 (small box) via Canada Post Text or email only.  No trades or offers

categories:GunsSporting Goods

3935 impressions

166 views

Mdt training shot timer. Used works great no issues.

categories:GunsSporting Goods

5129 impressions

257 views

The S8 wraps backwards over the barrel and makes the barrel look like a shorter barreled, suppressed firearm without doing either of those things. It is made out of a corrosion resistant stainless steel, nitrided black, for years of hard professional use. Although the linear compensator does not decrease the sound the firearm makes, it does direct that sound away from the shooter making the shooting experience a bit easier on the ears. The S8 compensator comes in 3 threading patterns: 1/2x28TPI (the .223 standard). 5/8x24TPI 1/2x36TPI The compensator requires a barrel diameter less than 1” with an unobstructed 2” of barrel behind the threads (before thing like gas blocks, front sight towers or bayonet lugs). If you have things like front sight posts that prevent a wrap around comp, consider the S9. The S9 was developed when customers running the ruger PC or the RDB couldn't use the S8 due to its wrap back design. The S9 is threaded in 1/2x28tpi Also shown is the S8 with a few barrel lengths combined with our HG handguards. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

74858 impressions

3366 views

Regular price: $140 Going out of business sale $100 4 or more units $80 The creativity named HG Handguards offer a universal solution for those looking for a replacement handguard for their WK180s, WK181, Raven builder kits, Crypto or AR15s. They are compatible with both piston systems and gas tubes. The handguards are Mlock compatible to allow for customization while keeping the weight down. The HG handguards work well with the Specter Arms S8 linear compensator and the assortment of after market barrels that we offer. (Please see the S8/S9 ad pictures for some examples). The handguards are free floated for accuracy and clamp on to the receiver using a sturdy steel barrel nut. Be careful of cheap imitations that use an aluminum nut. Lengths of 11" and 12" available. Only available in black. Shipping available at actual cost or pick up in SE Edmonton. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

40229 impressions

2096 views

For sale are KCI glock magazines They have been pinned by rivet (not crimped) to reduce thier capacity from 33 rounds to a canadian legal 10. They work well in the PC9, K9, Henry Homesteader, Raven9, TNW areo and the JR carbine in addition to glock 17/19 pistols. Multiple units available One magazine is $60 Five magazines are $250 10 magazines are $450 Shipping available at actual cost or pick up in SE Edmonton. A PAL is required to buy these items.

categories:GunsSporting Goods

30117 impressions

755 views

Steel gas block, non-adjustable, .750" gas journal $20 * Luth Steel ar15 adjustable gas block .750" gas journal $50 Mid length gas tube $20 Rifle length gas tube $5 (silver) Rifle length gas tube $8 (melonite/black) Anderson Charging Handle $20 H carbine weight buffer $30 H2 carbine weight buffer $40 H3 carbine weight buffer $50 LBE 223/556 Bolt, firing pin, cam pin kit $125 Hammer/trigger pins $5 (for a set of 2) Magazine catch and spring $5 Bolt catch (includes spring, roll pin and detent) $5 Buffer detent $1 (no I do not have detent springs) Takdown/pivot pin spring $2 Trigger guard $2 Faxon 18.6" barrel w/ adj gas block and gas tube (installed but not used) $300 Crush washer for 1/2" diameter threaded muzzle devices $2 1/4x28 3/4" length bolt $2 Anti-walk pin kit $20 15" mlock handguard $120 Vism mid length triangular aluminum handguard $40 _____________________________ With the exception of the barrel, all parts will be shipped in a canada post pre paid box for $19. Unless noted, all parts are new. Pick up available in SE Edmonton; minimum value for pick up order is $20 *can be installed sideways to block the gas port for renegade builds

categories:GunsSporting Goods

6404 impressions

290 views

Brand new This replacement part is a factory original from CZ UB. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantee excellent fit and reliable operation. All Full Size Pistols with 0.55" Bushings. CZ 75 SP01. CZ 75 SP01 Tactical. CZ 75 Shadow. CZ 75 SP01 Shadow. Barrel Diameter 0.550"  This is the bigger diameter barrel for SP01 and SP01 Shadow, it will not fit in standard CZ75. The Standard bushing is smaller (0.502").

categories:GunsSporting Goods

9023 impressions

458 views

Brand new Zev stainless steel compact guide rod with screw for Glock 19/23 Gen 3/4 (but can be used in Gen 5 in some cases). Also, a set of Eemann 12lb and 13lb springs. Sold as a set.

categories:GunsSporting Goods

7114 impressions

309 views

The M61 is a combat weapon used in US jet aircraft

categories:GunsSporting Goods

1178 impressions

92 views

Was used a fair bit but remains in as new condition. No rust or scratches or such. Replaced the expander ball with the carbide version. Original expander plug is still in the case. Still has the original case holder. Includes spare decapping pin. I don't shoot 243win anymore so this is excess to my needs and I'd just as soon clear it out. Note that I am selling alot of other dies and other 243 winchester reloading equipment and cases,bullets, etc. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

4014 impressions

206 views

Using the same principle as electroplating, this system uses a low voltage and chemicals to remove the lead or copper from your barrel and plate it on the sacrificial anode (stainless steel rod) that you insert in the barrel. It did work in my 243 win 1885 but I just don't shoot enough to make it worthwhile. I think if you had some heavily fouled barrels, maybe a cache of military surplus for example this would be alot less work that scrubbing forever. Comes with the controller, the chemicals, the stainless steel rod and the electrochemical isolation doo-dads. Not sure about shipping as the rods are 30" long and there are two chemicals. One for Copper and one for Lead. Cheers, Cody

categories:GunsSporting Goods

2625 impressions

163 views

0.515"   used once                 $50 Turns out I needed a 0.508" which I had to special order from BuffaloArms. So these are extra to my needs. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2368 impressions

177 views

I don't think I ever even used them.  Just stuck with the Redding dies I already had. Bought them because Lee Precision claims they have more consistent neck tension and therefore better accuracy.  300WinMag.                 $40 243win.                         $40 or both for $70 Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2639 impressions

190 views

This is the easiest and cheapest way to size and lube the bullets as there is no nose punch needed and no special separate press.  You can use your standard single stage press.  Note that Lee no longer includes the ALOX lube in their kits.  Mine have the ALOX lube included.  From the Lee Precision website I stole the following quote: Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter. Ebay has these for $60 + $40 shipping.   Amazon: w/o lube for $40 - $90  and lube is $25 extra.  Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

3530 impressions

308 views

Clymer 45 ACP.     No Go.            $65 Forster 223 rem.  Field                  $65 I bought these to simply make sure the headspace had not grown too big. I did not get the 'go' gauges as that defines the minimum headspace and I was looking out for headspace growing with usage of the gun. Primarily for when I was searching for guns to purchase.  The field gauges indicate maximum safe headspace in used guns, i.e. slightly larger than the SAAMI as manufactured. If a 'Field' gauge will chamber, don't shoot the gun.  I'm not sure if I ever actually used these. They are in as new condition. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

4892 impressions

224 views

All were bought new. Some are unused; some used just to see the bullet. Only the 58 cal. R.E.A.L. bullets ended up in a gun. C430-310-RF.   Double Cavity.   Never used.                                                                       $35 C501-440-RF.   Double Cavity. Used once. Crisp but a bit of lead on it.                  $25 575-500-M.   Single Cavity Minie. Not actually a Minie as the bottom is flat. I thought this would be my 58 calibre Black Powder bullet. But I ended up going with the REAL Bullet.                                                                                                                                SOLD 58-440. Double Cavity R.E.A.L. Only selling one. You pick the one you want I keep the other. Don't remember why I ended up with two but both used for about 60 bullets total.  I think the one on the left is the newer style but used more.                        SOLD If you buy two I'll take off $5, buy 3 takes off $10, buy 4 take off $15. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Fill them up as much as possible up to 5kg. Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

4698 impressions

299 views

Instead of Calibre specific micrometers I use a different system. So this is simply not used anymore and available to you. Check out what RCBS says on their website about using these: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

3520 impressions

198 views

Fits CZ 75/85/97/SP01 Specifications: Unequaled Low Light Performance Brightest Night Sights Available Today Used by Military & Law Enforcement Green Dot/Green Dot ML17777

categories:GunsSporting Goods

1974 impressions

154 views