Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16+1 Barrel Length:  20″ Barrel Type:  Octagon Blued Steel Rate of Twist:  1:16 Overall Length:  38.5″ Weight:  6.75 lbs. Receiver Finish:  Nickel Plated Rear Sight:  Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight:  Brass Bead Scopeability:  Drilled and Tapped Scope Mount Type:  GB-CSM Stock Material:  American Walnut Buttplate/Pad:  Nickel Plated Length of Pull:  14″ Safety:  1/4 Cock Best Uses:  Target/Hunting/Collector Embellishments/Extras:  Receiver Engraving with 24K Gold Plating. Made in USA

categories:GunsSporting Goods

11866 impressions

768 views

Up for sale is a Tikka M65 (Tikkakoski) in 30–06. Made in Sweden. Overall this gun is in very good condition. The blewing is nice and the stock is in good shape with a few slight rubs and one small fill (see pictures) Bore is excellent, Drilled and tapped for scope. Comes with front and rear sitghts, front siight hood, large bolt knob, and a detachable magazine. Asking $850 gun only. Shipping and insurance paid by buyer.

categories:GunsSporting Goods

1334 impressions

210 views

Dillion Precision Reloading Machine Like New, Never Used $5250 obo Dillion Precision RL1100 ammunition reloading machine Dillion Precision variable speed automated case feeder, comes with mounting pole, small pistol plate, small rifle plate, large pistol plate, large rifle plate and case feeder mirror with flexible arm Numerous die plates for mounting individual calibres, without needing to remove to change calibres, including case trimmers and sizing/shaping dies being mounted, tool head conversion kits, , brings casing sizing back into SAMMI spec LED light mounted to provide better viewing of process Work bench mounting plate FW Arms auto center decappers/poppers and swagers included, with replacement pins Discharge tube for primers Discharge chute for finished ammo and receiving container Dillion Precision automated primer sorter, multiple tubes in small primer and large primer sizes, with spare tips Mr. Bullet automated bullet feeder, bullet feeder mirror with flexible arm, multiple bullet size feeder trays, dies and feeder tubes to tool heads Manuals, spare parts, spare sensors, tools, machine dust cover, case gauges, no go gauges All high quality equipment and replacement parts, no expense spared Dies for Lyman 9 mm, Lyman .223 cal 1 x 118 ml bottles of sheep Lanolin oil used for casing lube during processing Ammunition trays 9mm, 40 S & W, .45 ACP Contact Mike Logan cell 587-984-5851, mikelogan33833@yahoo.ca

categories:GunsSporting Goods

9505 impressions

539 views

I have 2 presses for sale $5250 each Dillion Precision Brass Processing Press Like New, Only Used to Test Setup $5250 obo each Dillion Precision CP2000 brass casing processing machine Dillion Precision variable speed automated case feeder, comes with mounting pole, small pistol plate, small rifle plate and case feeder mirror with flexible arm Numerous die plates for mounting individual calibres, without needing to remove to change calibres, including case trimmers and sizing/shaping dies being mounted, tool head conversion kits, brings casing sizing back into SAMMI spec Mark 7 Auto 1050 Pro motorization kit to fully automate CP2000 operation, touch screen operation LED light mounted to provide better viewing of process Work bench mounting plate FW Arms auto center decappers/poppers and swagers included, with replacement pins Discharge tube for primers Discharge chute for brass and receiving container Manuals, spare parts, spare sensors, tools, machine dust cover All high quality equipment and replacement parts, no expense spared Press #1 Dies for Lyman 9 mm, Lyman .223 cal, Redding .300 cal AAC Blackout Press #2 Dies for Lyman 9 mm, Lyman .223 cal, Redding .308 cal Win 1 x 118 ml bottles of sheep Lanolin oil used for casing lube during processing Contact Mike Logan cell 587-984-5851, mikelogan33833@yahoo.ca

categories:GunsSporting Goods

8672 impressions

443 views

For Sale $38,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $33,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area

categories:GunsSporting Goods

5888 impressions

932 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:GunsSporting Goods

9826 impressions

1054 views

Brand new Shell carrier for the 12 gauge Remington 870 shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:GunsSporting Goods

6858 impressions

401 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:GunsSporting Goods

8516 impressions

518 views

For Sale - one Lee Precision 25-06 Rem full length steel sizing 3 die set $75 - firm No trades or offers Brand new in box - new manufacture -full length sizing die -bullet seating die -crimp die (included) -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense via CP within Canada only. Small package/tracked to all provinces - $22 (small box) Text, email or leave message / unable to answer calls in remote areas. If this ad is up then item is still available.

categories:GunsSporting Goods

14685 impressions

1319 views

have a mint shape Husqavarna 7mm mag barrel ready to go for any 7000 8000 9000 Carl Gustuf rifles. $700.00 for the nitro barrel, mint. Email me for anymore info. Thanks info@genehuntfish.com

categories:GunsSporting Goods

52194 impressions

5338 views

2 boxes (20 in Box) 25-06 Brass for sale Thanks Gene Email for anymore info

categories:GunsSporting Goods

17233 impressions

1768 views

Remington Triggers 700 model Only. 100.00 and up. Some weaver bases and odd rings and bases from Leopold. Triggers For Remington 700 Models ONLY. No Bolts........ Email me for anything you need or want. Thanks

categories:GunsSporting Goods

57416 impressions

5791 views

I have 3 Remington 700 Action Triggers for sale ONLY!!! All New Have 2 One New Left only now. $175.00 firm shipping extra Mounting and trigger setup 250.00 installed . Email Me for more info. Never by a phone much. And I don't call after 9 pm or before 9 am, PLEASE.

categories:GunsSporting Goods

36708 impressions

3703 views

I have a River's Edge Tree Stand With Climber Bar,A High Dollar Safety Harness, and all paddings for this excellent Tree Stand. Will Hold 300 pounds. Use it for a week out Bear Hunting and now it is For Sale. Email me at info@genehuntfish.com

categories:GunsSporting Goods

29783 impressions

3246 views

Assorted gun parts and rings and bases for sale. Remington Triggers for 700 action, even one for a left handed rifles action. All are from factory guns. Three NEW!!! Are Brand new. One Left and 2 Right complete triggers with bolt stop and trigger lock for the bolt. 175.00 FIRM One used 50.00 no bolt or trigger lock up or any other parts.!!!! Rings and bases from Leopold and Weaver. You Have To Buy The Complete Package to Get This Deal!!!! No Exceptions.......... And I do not have any other gun parts for sale. Thanks Also have Husky Gun Info if your needing any help with the info on a Carl Gustaf Rifle Husky 8000 jeweled and trigger adjustment also. Mint!!!! 3000.00 plus with scope and 2 rifles barrels and some. Some parts are already sold,Thanks Gene

categories:GunsSporting Goods

57012 impressions

5074 views

Brand new Magnification: 3x Fixed Eye Relief: 2.2" Field of View: 7.3° Water Resistant: Submersible to 33 ft (10 m) depth Sealing: Fog resistant internal optics Length: 3.9" Weight: 11.9 oz 1x to 3x Magnification - The ability to transition between the two distances almost instantly and still maintain weapon accuracy. Battle Tested - EOTECH is dedicated to providing rugged, reliable and innovative products that offer a true advantage to all who use them. Adaptable - The EOTECH magnifiers are designed to work for both left and right-handed shooters and all come equipped with a locking, adjustable quick detach lever system allowing for immediate attachment or removal.

categories:GunsSporting Goods

4808 impressions

444 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:GunsSporting Goods

5569 impressions

512 views

Brand new Caliber: .223 (5.56mm) SureFire Suppressor Trainers are intended for use with marking cartridges (e.g. Simunition® FX®, and UTM), training ammunition (e.g. SRTA), frangible and live ammunition in a training environment. The SureFire Trainers mimic the length, weight and attachment of SureFire SOCOM Fast-Attach® suppressors, allowing warfighters to train as they would fight when participating in force on force training scenarios. Patented Fast-Attach® design attaches and removes in seconds Provides multiple live and simulated round training options Durable construction for long service life Proudly designed and manufactured in the U.S.A.

categories:GunsSporting Goods

9970 impressions

973 views

Brand new Caliber: 7.62x39 SureFire Suppressor Trainers are intended for use with marking cartridges (e.g. Simunition® FX®, and UTM), training ammunition (e.g. SRTA), frangible and live ammunition in a training environment. The SureFire Trainers mimic the length, weight and attachment of SureFire SOCOM Fast-Attach® suppressors, allowing warfighters to train as they would fight when participating in force on force training scenarios. Patented Fast-Attach® design attaches and removes in seconds Provides multiple live and simulated round training options Durable construction for long service life Proudly designed and manufactured in the U.S.A.

categories:GunsSporting Goods

4229 impressions

677 views

Brand new The JULIET4 4x Magnifier is designed to work as a stand-alone magnification solution or in conjunction with reflex optics. This family of magnifiers is an excellent choice for transitioning from close quarters to intermediate ranged targets. In conjunction with a reflex optic, the JULIET4 can be adjusted for height through the use of spacers. It has a PowerCam 90° Mount so it can be quickly flipped to the side for more immediate, close quarters scenarios or deployed rapidly to bring targets four times closer. Its quick release mount comes with built-in recoil lugs for repeatable zero. The JULIET4 has a front and rear thread-in lens protector to keep it secure from the elements. ROMEO4H FEATURES: Designed for modern pistols, MSR platforms and shotguns Comes standard with solid and see-through lens covers and quick release mount Ballistic Circle-Dot and Ballistic Circle QuadPlex options Users can select from 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds) 50,000+ hour battery life and the readily available CR2032 battery is side loading for quick battery replacement. Unlimited to acquire aiming point and target, regardless of eye position behind sight. MOTAC (Motion Activated Illumination) powers up or down when sensing motion Uses an ultra-efficient red LED illumination for daylight visibility and extended runtime True QR mount and low mount included Strong, lightweight aircraft-grade CNC aluminum housing Waterproof, IPX-7 rated, and fog-proof. JULIET4 Features: Aircraft grade CNC aluminum housing ensures a lifetime of reliable service. IPX-8 rated for waterproofing — up to 20 meters for 1 hour Dialectic coated prism size and weight Objective thread-in lens cover and ocular slip-on, flip-back lens cover included Backed by an Infinite Guarantee™

categories:GunsSporting Goods

4848 impressions

366 views

Brand new Non-restricted  Caliber: .308 WIN Capacity: 10 Action: Bolt Action Barrel Length: 24"  LOP: 330-355 mm Twist Rate | Number of Grooves: 1 : 10 / 4 Trigger Pull Weight: 6–13,5 Stock: Synthetic Weight: 5.3kg A sport special that combines the cutting-edge CZ 600 platform with a sophisticated chassis from the world-renowned MDT brand. This Light Grey cerakote-finished model features an MDT Elite Pistol Grip, adjustable cheekpiece on an AR-15-style buffer tube, and MDT CCS stock with adjustable LOP via butt pad spacers. It also comes with a Picatinny rail, M-LOK mounting points and an Arca Swiss rail. A specially designed MDT AICS 10-round magazine, equipped with a proprietary CZ follower, ensures fully reliable feeding from the ejection port. With advanced ergonomics, a heavy profile cold hammer forged barrel, and an innovative single-stage, easy-to-adjust trigger mechanism, CZ guarantees sub-0,75 MOA accuracy (five-shot groups at 100 meters using match-grade factory ammunition). Made in CZ

categories:GunsSporting Goods

12801 impressions

1357 views