Brand new The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm. Made in USA

categories:GunsSporting Goods

5372 impressions

439 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:GunsSporting Goods

5166 impressions

421 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2532 impressions

367 views

063912 I have for sale at Mossberg MVPLC 7.62 MM NATO ( 308 ) very low round, count, carbon fibre by pod . thread on muzzle, bake , ready for other attachments. mag pole but stock adjustable .and mag pole grips, metal clip, and spiralled bolt super heavy fluted barrel Very accurate bench shooter. Rail included.. scope And rings included. . package when purchased was $2500 with the vortex 4 to 16 x 44 viper I would include that scope if interested or the first focal plane West Hunter 4 x 16 x 44 First focal plane which ever you would prefer.

categories:GunsSporting Goods

16631 impressions

1705 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:GunsSporting Goods

7646 impressions

517 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:GunsSporting Goods

5740 impressions

566 views

Brand new Steel Weight: 136g/4.8oz 74 Style Muzzle Brake with M16x1 RH thread for use with Type 81M, Type 81SR and Type 81 LMG’s with the M16 thread pattern. Features a single chamber design with two top ports to reduce muzzle flip and four forward facing ports to reduce felt recoil. Made in Canada by Kodiak Defence.

categories:GunsSporting Goods

3436 impressions

398 views

Brand new New SureFire Turbo Series handgun WeaponLight generates a tightly focused, 66,000-candela beam pattern Highly visible, integrated 5-milliwatt laser—available in red or green—helps you get on target quickly and accurately without requiring the use of your gun's iron sights Mounts securely to Universal rail-equipped or Picatinny rail-equipped handguns or long guns The Turbo Series version of our X400 handgun WeaponLight delivers a stunning 66,000 candela of intense, tightly focused, far-reaching white light with a hot spot that is tremendously effective, plus a highly visible laser—available in red or green—to help the user get on target quickly and accurately. You can count on the X400T-A to help you positively identify threats at extreme distances while also providing ample spill light to help you maintain situational awareness, and you can trust its laser to provide crucial visual guidance without acquiring your sights if you’re forced to respond from a non-standard shooting position. Ambidextrous switching provides one-finger control of momentary-on or constant-on activation. Its rugged, aerospace aluminum body is Mil-Spec hard anodized for scratch and corrosion resistance and seal Precision-engineered Turbo reflector delivers 66,000 candela of tightly-focused white light; the farthest-reaching beam of any SureFire X-Series handgun WeaponLight Choose the <5 mW / 635-nanometer red laser or <5 mW / 515-nanometer green laser. Both are visible to the human eye for rapid target acquisition from nonstandard shooting positions Integral ambidextrous momentary- and constant-on switching provides easy activation Attaches securely to both Universal and Picatinny accessory rails Weatherproof O-ring and gasket sealing ensure durability in rainy conditions High-strength aerospace aluminum body is Mil-Spec hard anodized for extreme durability Accepts optional pressure-activated DG and XT remote switches for precision control without altering grip on weaponke it weatherproof. The X400T-A delivers a standard of excellence you can trust with your life.

categories:Guns

3680 impressions

366 views

Brand new The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. For use with M-LOK compatible hand guards and forends Accepts clip-style sling attachments such as our own Paraclip Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Length, Max: 1.8" Height, Max: 0.5" Weight, w/ Hardware: 1.0 oz.

categories:Guns

2211 impressions

371 views

Brand new The RSA QD provides a customized attachment point for all push-button QD slings. Made from corrosion resistant steel, it mounts on 1913 Picatinny rails and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.

categories:Guns

2344 impressions

360 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4008 impressions

452 views

Brand new The MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Guns

2447 impressions

356 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 9 Slots Max overall length of 4.1″.

categories:Guns

1968 impressions

319 views

Brand new The MBUS Rear Sight is a folding, spring-loaded flip-up sight. Constructed from impact resistant polymer, the MBUS sight is both lightweight and durable. It is compatible with all Picatinny rails, and, having been specifically tailored with the AR platform in mind, has the same height-over-bore as standard A2 iron sights. Two apertures are available for use, one large and one small, and both allow the sight to be folded in position. Can be adjusted for windage with a detent knob.

categories:Guns

2386 impressions

339 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2548 impressions

341 views

Brand new The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm.

categories:GunsSporting Goods

7449 impressions

622 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:GunsSporting Goods

5819 impressions

513 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 Slots Max overall length of 1.6″.

categories:GunsSporting Goods

1903 impressions

363 views

Brand new The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included. Made in USA

categories:GunsSporting Goods

2085 impressions

336 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2565 impressions

438 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots Max overall length of 3.3″.

categories:GunsSporting Goods

1394 impressions

286 views