Antique status Swiss 1882 manufacturered by Waffen Bern. One of the most sought after antiques, this revolver is chambered in 7.5 Swiss ordnance which is still available from Fiocchi. This revolver is commonly used with .32 sw longs, although the cases may bulge. S&B .32 longs is not recommended as the case rims are smaller than normal and may cause light strikes, all other brands are functional. The revolver itself is in very good condition, lockup and timing are tight. The bore is shiny as most of these revolvers are. Bluing is in good shape. The gun comes with a custom western quick draw holster that is formed to the gun, with the standard right hand attachment point or the holster can be swapped to the left side for a reverse draw set up. Pick up available, shipping included with insurance on buyer. Good pistol for bushwhacking and ranch carry. The gun will also come with a copy of the frt and a hard case. Please inquire if you need more pictures. Cash or etrasfer only. No pal required, just proof of over 18 Please check with a gunsmith before firing any antique firearm for the first time

categories:Sporting GoodsGuns

6047 impressions

232 views

Hello, I have a Winchester Commemorative Model 94. Little Big Horn 44-40 Centennial Model 1876-1976. Rifle has never been fired or left the case. I am the owner. I am selling several firearms from my fathers estate.

categories:Sporting GoodsGuns

8817 impressions

383 views

Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Savage and Lyman Montreal Sword This company name was used by the Montreal silversmiths Savage and Lyman between 1868-1878. The left side of the blade immediately in front of the guard Is marked Savage & Lyman Montreal Within the engraving on the left side is a Crown.  Believed to be indicative of Queen Victoria. The right side of the blade has a small brass insert which says PROOF.  Wilkinson Sword introduced these Proof Discs in 1844. In the engraving on the right side of the blade is the word ARTILLERY The guard is steel and has fish skin wire bound grips with most of the fish skin having been worn away.   Length of Sword – 40 1/2” Length of Grip including the Guard – 5 1/2” Blade Length – 34 1/2”   Savage & Lyman Montreal (or Savage & Lyman and Company) were manufacturers and suppliers of swords, known for military pattern swords like those for Canadian militia units (e.g., 1st Battalion Chasseurs Canadiens), marking them as producers/sellers, though like many firms, they likely had blades forged elsewhere (perhaps by specialists like J. Martin in Montreal) and then finished, hilted, proofed, and sold by Savage & Lyman in Montreal, a common practice for armsmakers then.  Key Points: Evidence of Manufacturing: Swords clearly marked "SAVAGE & LYMAN MONTREAL" exist in museum collections, showing they were a recognized name in arms. Role: They functioned as an arms dealer and supplier, customizing and selling weapons for Canadian military and militia. Production vs. Supply: While they might not have forged every single blade from raw steel in-house, they were responsible for the final product, including proofing and adding their own markings, as seen on a 1885 Chasseurs Canadiens sword. In short, they were a key player in the Montreal arms trade, making/selling quality military swords, even if blade forging was sometimes outsourced to other specialized smiths.    $350.00 Or Best Offer   Thanks,  Phil

categories:Sporting GoodsGuns

10269 impressions

327 views

16 Gauge Collector/Shooter Paper Shells---Reduced ! last chance one week left . - Winchester # 4 & Cil & Dominion # 6 long shot , Field Game loads. -Was 35$ Reduced to 25.00 $ for all ! Thats about a buck -1.30 each , or Trade ! -1 box .410 shells . -2 box's Remington 12 g # 6 shot . -3 box's of federal 12 g target & field . -1 box CCI .22 magnum . -1 box .22 hornet . - 1 box 30-30 win . -1 bag lead shot #4-#5#6#7 or Winchester Shotgun 209 Primers 3 box's . local exchange in person only Contact by Text or call evenings 780-908-8424 thanks.

categories:Sporting GoodsGuns

24216 impressions

494 views

If you were looking for a high condition Rock Island look no further. The pictures definitely speak for themselves. This is an extra clean inside and out battle rifle. No resting or pitting anywhere lots of finish left on the metal. As close to 10 out of 10, as you will find. Bore has very good lands and grooves. It comes with a Springfield armory new produced sling.   Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories. 

categories:Sporting GoodsGuns

9939 impressions

505 views

If this ad is still up, then item is available! For Sale - 1894 Winchester rifle in 38-55 cal. with round 26” barrel. Started out at $1200 Now $950 (as of Dec 15th) SOLD to Sam According to the serial number 161XXX, it puts the date of manufacturing to 1902, crescent butt plate, semi-buckhorn rear sight, all original except rear sight elevator is a replacement. Round 26" barrel, dark bore, good rifling, approx. 20% plum finish remains with lacquering on some of the metal. Dark walnut forend & stock (original) with the stock having a small piece missing from the left side and about a 1.25" old crack on the wood right side both near the bottom of the tang/guard (pictures are attached) but stock is still mounted solid to the tang. Action is still quite tight for it's age and old sling swivels had been added to the rifle at some point in it's younger years. Must have valid PAL to purchase and will be verified. EMT (shipped) or cash(pickup) - Shipping and/or insurance available at buyers expense thru Canada Post or a courier. Rear stock can be removed for transport. No trades or offers

categories:Sporting GoodsGuns

13504 impressions

939 views

This well balanced lightweight made by BSA in England has not been in use for 30 years or more, it is in very good condition with some ware to the blueing and scuffs on the stock. These rifles were manufactured with an integral muzzle brake to reduce recoil and the system works very well. Rifle is chambered in 30-06, hinged floor plate and left hand twist rifling and an adjustable trigger. Asking price is $850 would be happy to supply more pictures. Located west of Bentley. David

categories:Sporting GoodsGuns

4879 impressions

543 views

33 rounds of 243 win roommate left when he moved Also have 15 rounds of 260 rem neither of use to me Make me an offer ?

categories:Sporting GoodsGuns

4843 impressions

296 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

5875 impressions

455 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

12308 impressions

489 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11602 impressions

408 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10655 impressions

408 views

Brand new The KRISS Vector Ambidextrous Folding Stock Adapter for GEN II 2017 is constructed of hard coat anodized aluminum and steel and allows for the attachment of AR-15 type buffer or pistol arm brace tubes. The adaptor can be configured to fold to either the left or right side with only a few tools in a matter of moments. This part is only compatible with the Gen 2.1 (Gen 2-2017) Vector which does not have the original hinge mount. This part is incompatible with the Gen 1 and Gen 2 (hinged) Vector. One end of the adapter attaches directly into the Gen 2.1 Vector's upper housing. The other end features threading that will accept an AR buffer tube or pistol tube. SKU: KVA-FSABL00

categories:Sporting GoodsGuns

3358 impressions

441 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11402 impressions

480 views

Brand new While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit– TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in USA

categories:Sporting GoodsGuns

2548 impressions

410 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

6416 impressions

572 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:Sporting GoodsGuns

6585 impressions

627 views

Brand new Magnification: 3x Fixed Eye Relief: 2.2" Field of View: 7.3° Water Resistant: Submersible to 33 ft (10 m) depth Sealing: Fog resistant internal optics Length: 3.9" Weight: 11.9 oz 1x to 3x Magnification - The ability to transition between the two distances almost instantly and still maintain weapon accuracy. Battle Tested - EOTECH is dedicated to providing rugged, reliable and innovative products that offer a true advantage to all who use them. Adaptable - The EOTECH magnifiers are designed to work for both left and right-handed shooters and all come equipped with a locking, adjustable quick detach lever system allowing for immediate attachment or removal.

categories:Sporting GoodsGuns

5292 impressions

487 views

Brand new The KRISS Vector Ambidextrous Folding Stock is the dedicated folding stock solution for the Vector Gen 2.1 (Gen II 2017). The stock is constructed of aluminum and advanced polymer composites. The KRISS Vector Ambidextrous Folding Stock secures to the upper assembly with a push button hinge that can be configured to fold to the right or the left. The stock features two QD sling swivel mounts on the left and right side, as well as a sling loop towards the rear. In addition to folding, this stock is also adjustable for length of pull, adjusting to three positions. One end of the stock is installed directly into the Gen 2.1 Vector's upper housing. The other end is the stock itself. It is not an adapter.

categories:Sporting GoodsGuns

3369 impressions

519 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5615 impressions

451 views

Brand new Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. This compensator features 3 positions; off-hand right hand shooting, bench/bi-pod shooting and off-hand left hand shooting. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. M16 Thread for T81 SR and LMG, serial numbers <20202001 & all 2021 prefix

categories:Sporting GoodsGuns

8356 impressions

662 views