Brand new The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts feature two separate side clamps and allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount. 10-degree wedge included 0 MIL/0 MOA Height: 38 mm/1.5” Clearance: 7 mm/.27" (from the bottom of the tube to front of bridge of the mount body) Length: 141 mm/5.55” Weight: 154 g/5.4 oz Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

6114 impressions

364 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

8640 impressions

339 views

Brand new While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit– TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in USA

categories:GunsSporting Goods

2072 impressions

348 views

Brand new Pair of pins that replace receiver pins in order to attach side mounts on Type 81. Grade 8.8 strength steel. Made in USA

categories:GunsSporting Goods

2592 impressions

352 views

Brand new No-drill, Picatinny Side Mount for Type 81, manufactured by AK MasterMount USA. The mount was custom engineered and manufactured specifically for the Type 81 rifle and was extensively tested to ensure reliability, durability and zero-holding properties. The side mount installation is completely reversible and does not involve any drilling or permanent alterations to the rifle. Fits all Type 81 versions. This “NO-MOD” steel optic mounting side rail is the perfect accessory for the Type 81 in order to mount optics and accessories. It attaches to the hammer and trigger axis pin holes by the use of threaded axis pins, standard on Type 81 SR and optional as an Optics Ready "OR" model Type 81 SE. Threaded pins are optionally available for rifles without built-in receiver pins. No drilling, tapping, riveting, or gunsmithing needed. This steel side rail is low profile, rock-solid, and parallel to the barrel. The side rail dimensionally is the standard AK pattern, however was specifically designed for the AK MasterMount Optics Mounts for ideal positioning, cheek weld and ergonomics. Made from 1018 steel. The pins are custom manufactured in the USA of Grade 8.8 strength steel.

categories:GunsSporting Goods

10369 impressions

1051 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Remington 870 series shotguns, adding modularity, comfort, and customizability to the 870 platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. The MOE M-LOK Forend is not compatible with the Remington 870 Super Mag.

categories:GunsSporting Goods

4518 impressions

374 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:GunsSporting Goods

4984 impressions

406 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:GunsSporting Goods

7298 impressions

491 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 3 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:GunsSporting Goods

4875 impressions

422 views

Brand new The KRISS Vector Ambidextrous Folding Stock is the dedicated folding stock solution for the Vector Gen 2.1 (Gen II 2017). The stock is constructed of aluminum and advanced polymer composites. The KRISS Vector Ambidextrous Folding Stock secures to the upper assembly with a push button hinge that can be configured to fold to the right or the left. The stock features two QD sling swivel mounts on the left and right side, as well as a sling loop towards the rear. In addition to folding, this stock is also adjustable for length of pull, adjusting to three positions. One end of the stock is installed directly into the Gen 2.1 Vector's upper housing. The other end is the stock itself. It is not an adapter.

categories:GunsSporting Goods

3111 impressions

455 views

Brand new All steel construction Steel, rectangular sight post selectable between Match and Standard widths   —.040” Match width for increased precision   —.060” Standard width for maximum visibility Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks Elevation adjustment knob – no tools required Positive detents in both the up and down positions as well as on the elevation knob Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE:  All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights. Only compatible with MBUS Pro OFFSET Rear sight MAG526.

categories:Guns

2567 impressions

364 views

Brand new All steel construction Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail Windage adjustable with low-profile knob – no tools required Positive detents in both the up and down positions Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE: Only compatible with MBUS Pro OFFSET Front sight MAG525.

categories:Guns

2419 impressions

332 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Remington 870 series shotguns, adding modularity, comfort, and customizability to the 870 platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. The MOE M-LOK Forend is not compatible with the Remington 870 Super Mag.

categories:GunsSporting Goods

5071 impressions

479 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:GunsSporting Goods

5636 impressions

501 views

Brand new XT™ Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail.  One panel per package.

categories:GunsSporting Goods

1583 impressions

327 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:GunsSporting Goods

4585 impressions

380 views

Brand new TACTICAL LIGHT WITH RED LASER DESIGNED FOR USE WITH GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X RAIL AND GLOCK® 48 RAIL SUBCOMPACT HANDGUNS An industry first, the ultra-compact TLR-6® weapon light with high power LED and integrated red aiming laser features tool-less battery replacement without removing the weapon or the need to re-sight the laser. The light provides 1 hour of regulated runtime when in dual light/laser mode. Designed to securely attach to the trigger guard and rail of the GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X Rail and GLOCK® 48 Rail subcompact handguns. Features C4® LED illuminator and a 640-660nm red laser 100 lumens; 2,000 candela; 89m beam distance Runs 1 hour (LED only or LED/laser combo); 11 hours (laser only) Designed to securely attach to the rail and trigger guard of the following standard and compact railed handguns: Springfield Armory® XD®, XD(M)®, and XD® MOD.2® Smith & Wesson® M&P® GLOCK® Parabolic reflector produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity; red laser provides long-range targeting Ambidextrous switching (push-button on both sides) to access three modes: Laser only; Laser/LED combo; LED illumination only All modes feature a 10 minute auto shut-off to conserve batteries Batteries can be replaced while light remains mounted on gun; no need to re-sight laser after battery change Uses two CR1/3N lithium batteries (included) Removable cover for easy attachment/removal Windage and elevation adjustment screw mounted in brass bushing for dependable zero retention of laser Durable, impact-resistant polymer construction; IPX4 water-resistant; 1m impact resistance tested Operating temperatures of -20°F to +120°F Serialized for positive identification Size varies by model Limited lifetime warranty Assembled in USA

categories:Guns

6671 impressions

675 views