Brand new Match-grade precision drop-in barrel 1:10 Twist / 6 groove rifling CNC-machined from 416R stainless steel billet results in superior corrosion resistance and durability Low-temperature vacuum PVD coating creates a durable barrier against wear and tear even in the harshest environments BORSLICK™ Boron Nitride DCD (Dynamic Compound Deposition) inner bore treatment resists heat and carbon buildup Target crowned muzzle Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty Made in USA

categories:Sporting GoodsGuns

3293 impressions

508 views

Rifle Specs (6.5 Creedmoor): • Barrel: 26” stainless fluted heavy barrel • OAL: 46-1/8" • Capacity: 4+1 (detachable rotary mag) • Twist Rate: 1 in 7” • Weight: Approx. 8.3 lbs 🔧 Features: • Black & gray Max synthetic stock • Fully adjustable comb + LOP spacers • Recoil Hawg muzzle brake (5/8”-24 TPI) • Inflex 2 recoil pad • Extended bolt handle Built for long-range precision & serious performance. Vortex Tactical 4x16x44 • EBR-2C FFP reticle – accurate holdovers & windage at any magnification • 4x optical system – edge-to-edge clarity • Exposed, low-profile elevation & windage turrets • Side parallax adjustment (10 yards to infinity) • Rugged one-piece aluminum tube Affordable, field-ready FFP optic for precision shooting. Pelican® V770 Vault Rifle Case: • Fits scoped rifles – from carbines to full-length magnums • Crushproof, dustproof, & weather-resistant • High-impact polymer shell • 4 layers of customizable protective foam • 4 push-button latches for secure + easy access • Heavy-duty ergonomic handles • Interior: 50" x 10" x 6" (127 x 25.4 x 15.2 cm) Perfect for safe storage or air travel. DM for more info, pics, or to arrange a viewing.

categories:Sporting GoodsGuns

12449 impressions

1183 views

Savage short action, carbon fibre match grade ibi barrel, mdt xrs chassis, timney trigger, nigjt force shv 4x14x56 illuminated optic, precision match grade rings, low round count,

categories:Sporting GoodsGuns

3588 impressions

507 views

Selling my Novritsch SSG24 bolt-action sniper rifle – the most reliable out-of-the-box sniper in airsoft. No upgrades needed – this thing is laser-accurate, durable, and field-ready. Key Features: • 6.01mm precision inner barrel – Deadly accurate at long range • Pre-upgraded internals – Shoots up to 650 FPS with the right spring (interchangeable) • Adjustable hop-up – Easy to dial in for perfect BB flight • Polymer stock & metal barrel – Built tough for any terrain • 28-round magazine – Smooth feeding, even with heavy BBs Condition: Excellent – barely used, well-maintained, and shoots perfectly. No cracks, no issues. Included: SSG24 rifle 1 Magazine (Optional: Scope, bipod, case — if you’re including extras) Bought for 1k selling for 900 – Fair offers considered. DM me if you want a sniper that hits hard and straight every time. First come, first served!

categories:Sporting GoodsGuns

6401 impressions

931 views

Cheddite 209 primers are a dependable choice for shooters who need consistent and reliable ignition in their shotgun shells. These primers are crafted with precision to provide a stable and predictable firing response, making them a top pick for reloading enthusiasts. Cheddite 209 primers are primarily used for reloading shotgun shells. Their reliable ignition makes them suitable for a variety of shooting disciplines, including hunting, clay shooting, and defensive training.

categories:Sporting GoodsGuns

2801 impressions

222 views

Savage 110 270win in great condition. Have put 40 rounds through it. Comes with vortex Viper 4-12 scope, vortex pro rings (rings have been lapped for perfect fit), extended bolt handle, vortex flip caps and 5 boxes of Hornady Precision Hunter. All in I paid just over 2100. PAL required, local pick up preferred. Text preferred. Price is firm

categories:Sporting GoodsGuns

4852 impressions

415 views

Brand-new, unfired Browning X-Bolt Hell's Canyon Max Long Range rifle, chambered in 6.8 Western. This precision rifle features a 26" fluted heavy sporter contour barrel with a Cerakote finish. It comes equipped with a factory-installed Recoil Hawg muzzle brake, effectively reducing recoil by up to 76%. The composite Max stock includes an adjustable comb for personalized eye-to-scope alignment and spacers to customize the length of pull. I am not interested in trades, and the price is firm. A valid PAL is required and must be confirmed to proceed with the transfer.

categories:Sporting GoodsGuns

15073 impressions

1997 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2951 impressions

493 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

5595 impressions

438 views

Everything is basically new and works perfectly. About 40 rounds through the gun and extremely accurate. Includes everything in photos Precision armament hypertap muzzle brake MDT carbon bipod MDT rings Vortex strike eagle 5-25x56 moa Accushot monopod Pelicans vault v800 Photo of 100 yard group

categories:Sporting GoodsGuns

16251 impressions

1881 views

Brand new Shell carrier for the 12 gauge Remington 870 shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:Sporting GoodsGuns

7976 impressions

450 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

6143 impressions

558 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2742 impressions

406 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8410 impressions

573 views

Brand new Matching a wide zoom range with a bright objective lens and a reticle rich in hold points, the Riton Optics 5-25×50 X5 Conquer MRAD Riflescope is a versatile optic for serious hunters and shooters. This one-piece aluminum scope features a first focal plane, Christmas tree-style illuminated PSR reticle and MRAD-based turrets for dialing in precise elevation and windage adjustments. The large objective lens admits enough light for good vision even in low-light conditions, and the sight picture is sharp and clear through HD glass and multiple layers of anti-reflective coating. Riton’s R5 zero stop turrets adjust impact point at 1/10 MRAD, with a 21 MRAD total adjustment range. Zooming is effortless with the removable throw lever, and the fast-focus eyepiece makes it easy to sharpen your view of the reticle. The X5 Conquer is waterproof, nitrogen-purged fogproof, and tested to withstand 1200 Gs of recoil. 5-25x zoom magnification 50mm objective diameter Fully multi-coated HD glass 22.5-4.5′ field of view at 100 yards First focal plane Christmas tree style Red illuminated with six brightness levels and off settings in between 1/10 MRAD per click impact point correction 21 MRAD elevation and windage adjustment ranges Side-focus parallax adjustment, 10 yards to infinity 3.7″ eye relief 34mm maintube One-piece CNC-machined aluminum housing Type III hard anodized matte black finish Exposed zero-stop turrets Fast focus eyepiece with knurled zoom ring and removable zoom ring throw lever Nitrogen purged, fogproof and waterproof

categories:Sporting GoodsGuns

3590 impressions

534 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:Sporting GoodsGuns

6333 impressions

616 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2774 impressions

489 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5373 impressions

437 views

Brand new The Magpul forward sling mount is a sling attachment point for the Mossberg 590A1 series of shotguns designed to clamp directly onto the barrel and magazine tube. The sling Mount can be configured to accept either a push-button QD sling swivel or a one point clip in style attachment sling. It is constructed from precision cast steel that is melonite coated for enhanced wear and corrosion resistance. Made in USA

categories:Sporting GoodsGuns

6818 impressions

626 views

Cheddite 209 primers are a dependable choice for shooters who need consistent and reliable ignition in their shotgun shells. These primers are crafted with precision to provide a stable and predictable firing response, making them a top pick for reloading enthusiasts. Cheddite 209 primers are primarily used for reloading shotgun shells. Their reliable ignition makes them suitable for a variety of shooting disciplines, including hunting, clay shooting, and defensive training.

categories:Sporting GoodsGuns

4531 impressions

561 views

Brand new The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Sporting GoodsGuns

2275 impressions

392 views