1500.00 - Browning Medallion 7mm Rem. Mag; 26'' barrel with Boss. With Boss you can adjust to shoot any bullet accurately and reduces recoil. Some minor scoff marks on stock. Shoots the HSM 168gr. at 3140 f/s and about 2'' group at 300 yds. Also have drop chart to 800 yds. Second magazine and reloading RCBS dies. 1200.00 - Bushnell tactical 4.5 x 30 x 50mm with side focus. Scope set for 250 yds. and tactical dial up to 800yds. 810.00 - 119 rds. - HSM 168gr. Berger bullets. 50.00 - 20 rds. - Federal Premium 150gr. boat tail soft point. 40.00 - 19 rds. - Federal Power Shok 145gr. Speer Grand Slam No message. Emails only!

categories:GunsSporting Goods

73931 impressions

2169 views

120.00 - 60 rds. Remington 243 win. 100gr. soft point. 60.00 - 20 rds. Federal Premium 85 gr. Sierra Game King BTHP. 100.00 - 40 rds. Federal Premium 70 gr. Nosler Ballistic Tip. 120.00 - 60 rds. reloaded 100 gr. Also have reloading RCBS dies. NO message. Emails only!

categories:GunsSporting Goods

60205 impressions

2892 views

Was used a fair bit but remains in as new condition. No rust or scratches or such. Replaced the expander ball with the carbide version. Original expander plug is still in the case. Still has the original case holder. Includes spare decapping pin. I don't shoot 243win anymore so this is excess to my needs and I'd just as soon clear it out. Note that I am selling alot of other dies and other 243 winchester reloading equipment and cases,bullets, etc. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2938 impressions

136 views

I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2405 impressions

128 views

This is the easiest and cheapest way to size and lube the bullets as there is no nose punch needed and no special separate press.  You can use your standard single stage press.  Note that Lee no longer includes the ALOX lube in their kits.  Mine have the ALOX lube included.  From the Lee Precision website I stole the following quote: Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter. Ebay has these for $60 + $40 shipping.   Amazon: w/o lube for $40 - $90  and lube is $25 extra.  Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2509 impressions

238 views

Instead of Calibre specific micrometers I use a different system. So this is simply not used anymore and available to you. Check out what RCBS says on their website about using these: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2752 impressions

144 views

I have about 10 pounds of various gun powder’s suitable for reloading .410 shotshells or small cased varmint ammo (eg. 22 Hornet, 221 Fireball) . 3 pounds of Winchester 296, 2 pounds of H110 (same load data as Winchester 296), 1 pound of Hogdon Lil’ Gun, 1 pound of Winchester 680, 4 pounds of Bulk 116S that uses Winchester 680 load data. Data load example: With both the Winchester 296 and the H110 the load for .410 would be 15.5 grains of one of these 2 powders to 1/2 an ounce of shot. I’m asking for $40.00 a pound “or” trade the equivalent weight of suitable shotgun powder for 20 gauge shotgun reloading (eg. Universal Clays, SR4756, Green Dot, Unique, SR7625, PB, 700X, 473AA, Herco, 800X, HS-7, 540, 571.

categories:GunsSporting Goods

3339 impressions

85 views

I understand some in that list may be on the prohibited list, just ignore it, they will not be transferable. Therefore not for sale. This is a generic list, if you want info or pictures of a specific item let me know. No low baller No PayPal deal from Nigeria is.... Serious buyer only -akkar Churchill 12ga o/u gold plate - am arms co Boston 1898 10ga Damascus steel brakes sideways ***SOLD!!!*** -remington 870 express 12ga -kral arms o/y 12ga new -1929 Grand prix Milano 16ga side by side -carcano 1940 (exact same gun that shot jfk) -suomi with mag and drum mag -16 ga side by side -sks laminated stoke with thumb hole -winchester alberta diamond jubilee 30-30 -el Faisal 410 side by side -norinco jw2000 12ga -Japanese police parade sword ww2 -carcano carabiner -us model 1917 eddystone 30-06 -lee enfield no4mk1 -spec 180 mcr 223 with bushnell 3200 elite -mosin nagant -sks -20ga single shot turkish -tm22 with red dot -410 o/u turkish -300 rum model 700 with vortex viper 6.5-20/50 scope -ruger 22 mag bolt action with scorpion 4-16/44 scope -iwi x95 223/556 with red dot and scorpion series 3 scope -deyra mk12 bronze 12 semi -marlin 1895 sbl 45-70 -uts 15 with red dot pump 12ga -super black eagle 3 semi 12ga -cadex 338 full set up with nightforce nx8 scope ,laser level for extreme long range.... the whole nine yard ***SOLD!!!!!*** -lee enfield cavalry carabine 1898 ( extremely rare, serious collector only) - full reloading kit and ton on components.... -Huge lot of ammo as well Annealing machine, wet tumbler, digital auto feeding scale.... - level 4 plate carrier with pouch and first aid kit.... -cross bow bear x intense with scope (brand new) -pse bow with case and accessories

categories:GunsSporting Goods

18836 impressions

1599 views

Ever think about trying a wildcat cartridge? I have 20 Extreme dies available as well as the reamer. Wth is a 20 Extreme? It is a fast, accurate, fun shooting little 20 caliber cartridge based off the 222 Remington case that is easy on the shoulder and barrel, cheap to load for too. It was designed by my late friend and fellow gun enthusiast. No fire forming required, run the case thru the dies, trim, load and shoot. These days when components are so expensive it's nice to be able to go to the range and shoot more than a couple rounds and actually have some fun. One load I have uses only 18.6 grains of powder, that's somewhere around 375 loads to a pound of powder! Great for gopher, coyotes, fox and other small game or just target shooting for fun. These are brand new still sealed from factory

categories:GunsSporting Goods

13032 impressions

779 views

Marlin 1895 in 45-70 Can meet in edmonton, grande prairie, calgary and the surrounding areas. Really good gun, shoots great and works awesome, down sizing but maybe interested in a partial trade for a 20 gauge Comes with the shell holder, xs lever scout rail, reloading dies and vortex crossfire II Hunting gun so has some little scratches and a chip out of the butt stock pictured Price is OBO but asking 2000 for the rifle and attachments and 2600 with ammo

categories:GunsSporting Goods

10629 impressions

663 views

Ammo for antique guns (1872/ 1878 Swiss Revolver; Milbank-Amsler Series; 1867 Peabody and Vetterli series) $200/ Box 3 boxes available I bought it from CSC and most likely they did the reloading Buy at your own risk and do your own research before buying Local sale only, unless the buyer arranges for the shipping Will accept non-corrosive ammo (12 gauge, 357, 45-70, 308, 7.62x39) in trade/ partial trade PAL required

categories:GunsSporting Goods

20226 impressions

891 views

RCBS 375 Ruger Dies -$50 SOLD Nosler Accubond 300 grain 89 total-$160 Barnes 350 grain TSX 77 total-$125 Speer 270 grain 200 total-$180 Speer 235 grain 50 total- $40 Hornady 250 grain CX 73 total-$100 Hornady Outfitter 40 rounds, Hornady Dangerous Game 7 rounds- $200 for all 60 pieces of Hornady brass, fired once from factory and once more- $150 Shipping is on buyer, low ballers will be ignored or blocked…. Let’s not waste each others time. If you buy entire package we can talk about a bundle price.

categories:GunsSporting Goods

2337 impressions

272 views