Crossman .22 pistol 5 full C02 cartridges Full tin of X magnum pellets 

categories:Sporting GoodsGuns

12174 impressions

959 views

Brand new Caliber: 22lr Capacity: 10 rds Fits: Ruger SR22 Pistol Made in USA

categories:Guns

12974 impressions

1184 views

This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling. This is filled by bulk C02 not the disposable canisters.. comes with home made leather holster ser# 320546

categories:Sporting GoodsGuns

15232 impressions

892 views

This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling.. Co2

categories:Sporting GoodsGuns

21800 impressions

987 views

Marstar pistol case 13.5"x8"x3.5" Easily fits 2 full size hand guns. Local pick up only. Text or call only.

categories:Sporting GoodsGuns

48842 impressions

1959 views

Winchester Pistol Grip Cap Scroll Insert Only - No PG Cap - (0.86" x 1.29") . 2 Available . $25.00 Each . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

39583 impressions

892 views

For Sale - one bag of 100 pieces of new, unopened Remington 45 Long Colt unprimed brass. Perfect for that special pistol or rifle... $75 - firm! No offers or trades 100 pieces per bag / 1 bag available Brand new unprimed - unfired 100 pieces I also have lead 200gr FN projectiles for available for sale, just ask about them. EMT (shipped) or cash (at pickup) - pick up available by appointment only, house drop box or shipped at buyers expense by Canada Post within Canada only. Small package/tracked - $22 to all provinces

categories:Sporting GoodsGuns

3696 impressions

143 views

For Sale - Lee Precision 7.62 Nagant pistol full length 3 die set - no crimp die included $90 - firm! Brand new in box - Contains: -full length sizing die -expending die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box EMT(shipped) or cash (pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only via Canada Post Small package/tracked to all provinces - $22 (small box) Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is still up then item is available.

categories:Sporting GoodsGuns

16670 impressions

675 views

I can print you any of the included items in the provided photos, HOWEVER, I can print any other grips/covers you prefer that are available on various 3D printing sites. (Thingiverse, Printables, Yeggi, etc.) If you find something you like on any of those sites, send me the link and I can print them for you.  PLA+ is an extremely durable material that I have been using on my own firearms for years. Available colours include Matte Black PLA+ and Wood filament (Looks and feels like wood, not as strong as PLA+). All items are $15 for the first one (rail covers come in sets of 2), $10 for the second item, and all subsequent items will be $5 per item. You can equip yourself with a foregrip, pistol grip, and rail cover, of your choosing, for $30. If you require M-Lok hardware please let me know. There will be an additional $12 charge for the screws. (Authentic Magpul M-Lok T-Nut screws) Picatinny grips will come with their own hardware at no additional charge. Shipping is $19 flat rate

categories:Sporting GoodsGuns

1633 impressions

84 views

Upgraded furniture and flash hider ordered in from US. Incredibly light fun and comfortable gun to shoot for all sized shooters. Pistol grip is thoughtfully designed doesn’t really reduce the takedown angle at all but makes it very nice to shoot and manipulate. Barrel shroud can also be easily wrapped in paracord if it’s a back country/survival companion. Weighs almost nothing, great for small game or lots of cheap fun for young or new shooters at the range - or both. Would make a great backpack/survival companion where legal as well.  Comes with everything in the photos including the Bushnell TRS-25 red dot and 645rds of CCI maxi mag .22 WMR 40gr HP.  I’m not splitting up please don’t ask. PAL will be validated with the RCMP CFP prior to meetup and I will check PAL or DL in person as well to verify identity. 

categories:Sporting GoodsGuns

3493 impressions

245 views

For Sale - one original Tara TM9 9mm pistol 10rd cap. magazine $55 - firm! 1 available Condition: Brand new - loose (no packaging) / not used or loaded / 17rd cap. mag crimped to 10rd (view picture attached). EMT or cash - Remote pick up available by appointment only (cash) or house drop box or shipped (emt) at buyers expense within Canada only. Small package/tracked, all provinces - $22 Text, email, or leave message No trades, offers or deals at this time! All sales are final. If this ad is still up then item is available

categories:Sporting GoodsGuns

28986 impressions

1474 views

(White base color) customized with professional paint. Well maintained and only lightly used since end of summer 2025. Comes with a folding vertical foregrip with multiple positions, Tandem Kross hivegrip (rubber pistol grip) & original grip, 9” folding bipod, red dot sight (1x28x40mm) with 5 different reticles, 2.5-10x illuminated (red/green) scope with laser sight, one 110 round gsg-16 .22lr drum magazine with drum adapter from Tommy enterprises, two 25 polymer round magazines, two 10 round polymer magazines and some ammo, approx 200-300 rounds.

categories:Sporting GoodsGuns

3455 impressions

349 views

Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:Sporting GoodsGuns

29991 impressions

1149 views

Small pistol primers (1000), powder (2) 357/38 cal. Wad cutters (270) 357/38 cal slugs (650) Priced out all is approx $500 my price $250 will consider selling separately

categories:Sporting GoodsGuns

10783 impressions

730 views

Brand new Non Restricted Caliber: 12 Gauge Overall Length: 29.5" Weight (unloaded): 9 pounds 12 ounces Barrels: 2 x 18 7/8”, chambered for 2 ¾” or 3" shells Chokes: Both barrels include spreader choke tubes with Tru-Choke thread pattern Capacity: 14 rounds in magazine tubes + 2 in chambers = 16 total  with indicator windows Action: pump action with two shots from single trigger, inline shell feeding Material: Patented polymer and aluminum frame Controls: Ambidextrous safety, ambidextrous pump slide release Grip: Co-Molded non-slip rubber pistol grip, composite front vertical grip Stock: Synthetic stock  Forend: Composite material with slots for MOE Rails Recoil Pad: Rubber with dual spring shock absorbing recoil mechanism Sling Points: Front sling attachment, sling swivel attachment on stock Part #: DP12GENIIBLK

categories:Sporting GoodsGuns

4613 impressions

201 views

Brand new The KRISS Vector Ambidextrous Folding Stock Adapter for GEN II 2017 is constructed of hard coat anodized aluminum and steel and allows for the attachment of AR-15 type buffer or pistol arm brace tubes. The adaptor can be configured to fold to either the left or right side with only a few tools in a matter of moments. This part is only compatible with the Gen 2.1 (Gen 2-2017) Vector which does not have the original hinge mount. This part is incompatible with the Gen 1 and Gen 2 (hinged) Vector. One end of the adapter attaches directly into the Gen 2.1 Vector's upper housing. The other end features threading that will accept an AR buffer tube or pistol tube. SKU: KVA-FSABL00

categories:Sporting GoodsGuns

3358 impressions

441 views

Brand new OEM CZ Optic Ready Plate With this you can add a MRDS to your Shadow 2 optic ready pistol. Fits MRDS: Trijicon RMR/SRO Parts No.: 1091-1420-01

categories:Sporting GoodsGuns

4040 impressions

408 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

16423 impressions

1400 views

New .22 Cal. Pistol Cleaning rod By pro shot products. Shipping at purchasers expense

categories:Sporting GoodsGuns

6344 impressions

467 views

Brand new Caliber: 22lr Capacity: 10 rds Material: Polymer Fits: Chiappa 1911-22 Pistols Made in Italy

categories:Guns

8439 impressions

755 views

Brand new Caliber: 22lr Capacity: 10 rds Fits: .22 LR Conversion Kit for 1911 Pistols Made in USA

categories:Sporting GoodsGuns

11280 impressions

739 views