Calibre 350 Remington Mag. Scope and two boxes of ammunition included. Phone only. No texts please.

categories:GunsSporting Goods

27069 impressions

1816 views

I have over 30,000 once fired brass cases of many different calibers and head stamps for sale. Prices are as follows, followed by approximate amounts available. I can ship up to 5kg or 11 lbs anywhere in Canada for $20 flat rate. That would be (300 +-) 300 Win Mag cases and more of smaller cases. Check this ad periodically as brass will be added when available or deleted when sold out. 300 Win Mag $1.00 each (3,000 +- available) 7mm Rem Mag $1.00 each (2,200 +- available) 300 Win Short Mag $1.00 each (350 +- available) 7mm Win Short Mag $1.00 each (174 +- available) 270 Win Short Mag $1.00 each (SOLD OUT) 30-06 Springfield $.50 each (2,600 +- available) 308 Win $.50 each (1850 +- available) 270-Win $.50 each (1,650 +- available) 7mm-08 $.50 each (SOLD OUT) 243 Win $.50 each (800 +- available) 303 British $.75 each (350 +- available) 22-250 $.75 each (300 +- available) 30-30 Win $.75 each (500 +- available) 6.5 Creedmoor $.75 each (SOLD OUT) 350 Legend $.50 each (75 +- available) 223/556 $.25 each (5,000 +- available) 9mm Luger $.06 each (1,000 +- available) Some other smaller lots available. Text or email is best. Text: 780-876-5050 or email: jdwill1951@gmail.com

categories:GunsSporting Goods

134751 impressions

3661 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11644 impressions

520 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

70793 impressions

2177 views

Winchester model 70 push feed It’s been rebarreled to 350 rem mag Shoots good just don’t use it I have special dies to convert any belted magnum to 350 rem mag. If interested call or text 780-689-6842 $1000 obo May consider trades for other bolt action rifles

categories:GunsSporting Goods

4861 impressions

481 views

200 grain

categories:GunsSporting Goods

1104 impressions

109 views

I have a stock, magazine, barrel (22-250 varmint contour 1:14 twist) and rail for a Tikka T3. Spuhr 0 moa rail- $ 50 Stock (Left Hand)- $50 Magazine (308, 243, 6.5CM, etc)- $75 Barrel- $250 Barrel has had a few hundred rounds down it, only factory loads. It was shooting extremely well prior to swapping for a different calibre. The rail has the last flat rounded off at the back because it interfered with my scope magnification ring. I'll do it as a package for $350. I travel regularly in the NW side of the province and may be able to arrange delivery. Can ship at buyers expense.

categories:GunsSporting Goods

29215 impressions

1164 views

This is a budget friendly fixer upper Remington Model 1858 New Army revolver chambered for .44 caliber - price OBO. This revolver would have been born around the US Civil War, and based on level of wear probably saw use in the battle field before being harvested for parts at some point. Who knows what this revolver has seen in its long and resolute time on earth. Luckily it shows promise to be revived as parts still move freely and are not bound up. All required parts are available online, such as from Dixie Gun Works who accept international orders. Based on putting a cart together total cost would be expected to be below $200 USD, probably working out to about $350 CAD all said and done after shipping. https://www.dixiegunworks.com/index/page/category/category_id/409/name/Remington+M1858+New+Model+Army+and+Navy/ These are a very sought after and collectible model. Functional, a large caliber Remington Revolver in this shape this would generally go for $2000-$3000, with the only other one currently listed at $3800. Honestly I just don't have the time or interest to wait for the parts to show up and repair. My laziness is your gain. By my judgement, this revolver has the following issues: Barrel: loosened 1/16th turn, missing front sight and loading lever catch. Gouge around circumference and a couple dents. Frame: Cylinder pin is undersized (should get a replacement), needs seating lever and trigger guard/trigger guard screw Action: Needs cylinder hand, trigger return spring, and mainspring Overall these parts all appear to be available online from several websites including Positives are that the hammer and trigger move very freely without evidence of rust, and that the cylinder stop, trigger, and hammer interface all seem correct so that with a trigger return spring, mainspring, and cylinder hand all should be able to resume action operation and lockup. Probably a new cylinder pin would be beneficial for this also. The hardwood (walnut) replacement grips are very sturdy and fit well. The rifling is still present and does not look too worn. The frame is in great shape, with an "antiqued" dark grey patina that shows no evidence of active pitting. Overall a promising revolver for repair for an opportunistic buyer to add value. Please feel free to call or message for more details, photos, or videos. Comes with FRT antique report. No PAL, 18+ Ships Canada Check my ads for more antiques! I make no claims about the safety of firing ANY antique revolver. Ask a gunsmith

categories:GunsSporting Goods

8502 impressions

647 views

Text is best. Do not check email often. Huge Ammo sale clearing out thousands of rounds . See pictures for descriptions. 12 GA Federal Buckshot 2 3/4 inch 175 Rounds $250 .44 REM Mag Sold 6 Wolf ammo 8 PMC ammo 1 American Eagle 76 loose 44 rem mag ammo.Sold CCI Mini Mag Troy Landry edition .22LR have 10 boxes 300 rounds sold American Eagle .22LR 500 round count have 4 boxes sold CCI Mini mag .22lr 40grain have 1000 rounds Sold Winchester .22LR 2 boxes of 333 rounds and federal .22LR 525 rounds over 1100 rounds for ….SOLD Blazer 9mm Luger 115gr 1000 rounds $400 per box have 2000 rounds total for $750 Barnaul 9mm Luger steel Case FMJ 1000 rounds $350 have 2000 rounds $650 for 2000 LCW 9MM Luger 124 gr steel case have 500 rounds $175 Tula Ammo 9mm Luger 115 GR steel case have 1000 rounds $350 Wolf .45 ACP 230gr reman ammo have 2000 rounds Sold PMC .45 ACP 230 gr have 2000 rounds Sold PMC Bronze .223 1000 rounds Remington sold Norinco Bulk .223 Rem 1120 non corrosive round crate Sold 7.62X39mm FMJ 1440 rounds crate sold 7.62X39mm FMJ 1320 rounds Crate sold

categories:GunsSporting Goods

46376 impressions

2722 views

Remington 870 12ga comes with case and lock 350$

categories:GunsSporting Goods

19261 impressions

2246 views

This mint condition JRC 9mm Carbine is extremely fun & efficient for close range tactical training/target plinking (within 150yds). With less than 200 rounds put through it and a scope added to easily hit a pie plate at 100yds; She's ready to find someone who will use her a little more than I am. Threaded on the barrel end and adjustable stock along with 4 rails (2 sides, top/bottom) for additional accessories. Purchased 6 months ago so price with accessories is firm. Included Accessories- 10 round mag. & 30 round mag pinned at 10. -350 rounds of Winchester 115 gr. FMJ Ammo -VectorOptics Scope w/ Red/Green 5 ranges of brightness for day/night adjustments ad will be taken down when sold

categories:GunsSporting Goods

16282 impressions

2053 views

Remington 783 chambered in 30.06 Cabelas caliber specific 30.06 rifle scope 3-12x40mm 2 - 4 round magazines Always cleaned after use, never been dropped, gunsafe dings. $800 Lee precision challenger reloading kit with 4 PC. 30.06 dies with quick change collars. Bullet puller also with quick change collar $350

categories:GunsSporting Goods

8738 impressions

686 views

700 Rem 308 Heavy Barrel 24” BDL 1978 Production Has 27 rds through it Only difference in appearance to new is, there is no original box As mint as a rifle that has never been in the field and only taken to the range to zero Then only taken out every few years to verify the zero, cleaned and put away I really hate the idea of parting with this, its from the era when the people at Remington were Craftsmen and gave a shit Comes with New Leather sling as seen Leupold Fixed 12x with Target Knobs Front AO and Mildot Reticle Scope has a little kiss mark just behind the AO ring from a previous install on another rifle a long long time ago Has Leupold PRW rings Leupold 2 pc bases Selling as a complete unit, will not split it up This is all the Pics If your really interested you’ll come see it Local Sale Only, High River Area just South of Calgary I may travel part way to me someone who is driving here Anybody that appreciates real quality craftsmanship will love this Rifle You can find these is 223 and 243 but they’ve been hunted They Just aren't around un-Hunted in this condition in 308 If its gonna go I want $3500. for it, or it can sit in the safe for another 44 years or until I die which ever comes first Thanks Brad

categories:GunsSporting Goods

22290 impressions

1922 views

Send me an offer ! Sako 85 finnlight 300 win mag with 5-25x50 vortex viper illuminated scope Come with Sake 85 fin light 2400$ about 40-60 shots through gun optilock rings and mounts were 250$ Vortex scope was 1300$ Vault double rifle case was 350$ Federal premium ammo 1 box was 110$ Sako sling 3 boxes of brass Bought gun brand new recently (never shot) then got scope mounted and broke in barrel and zeroed it in. gun is amazing and I love it just have other expenses.

categories:GunsSporting Goods

748 impressions

133 views

For Sale - one Lee Precision 350 Remington Magnum full length steel sizing 2 die set (no crimp die included). $90 - firm Brand new in box - new manufacture / rare die set to find -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 (small box) Text, email, or leave message / unable to answer calls in remote areas No trades or offers

categories:GunsSporting Goods

6550 impressions

645 views

Hello , I'm looking for 350 rem mag ammo , brass , and dies . If you have anything please let me know ! Thanks

categories:GunsSporting Goods

2828 impressions

385 views