Has upgraded stock, pump grip, mag extender and sight rail mount, the stock is foldable and has a shock absorber so the gun has no recoil even with 3 inch slugs. Comes with some slugs and buck shot. Will trade with cash on my end for semi auto 5.56

categories:Sporting GoodsGuns

23858 impressions

2003 views

Almost new Savage 64 FV-SR Precision 22 caliber target rifle. Fluted Bull Barrel with screw end for suppressor. Comes with Bushnell scope and two 10 round clips. Located north west of sylvan lake. Price is obo PAL required

categories:Sporting GoodsGuns

3827 impressions

647 views

Looking to sell my CZ 457 MTR with a 20" barrel.    Rifle is in pristine condition, no scratches or dings whatsoever. Fired a box of Aguila sub sonic through it this winter and performed very well, was able to group 1 MOA and under at 40-50 meters. Selling because I already have 2 other 457's and am looking to pick up a .223 CZ 600 Trail. Willing to trade for a CZ 600 Trail in .223 with cash on my end. $1,050 for the rifle without Harris 6"-9" Bipod ($190 MSRP) and MDT 20 MOA rail ($90 MSRP), $1,200 with the rail and bipod. Please shoot me a message if interested, thanks!

categories:Sporting GoodsGuns

2566 impressions

152 views

For Sale $32,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $32,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area

categories:Sporting GoodsGuns

6980 impressions

1056 views

I’m selling a like new Weatherby accurate mark b 257 magnum. The gun is like new and comes with a set of 30mm Leupold rings. I would consider trading for a high end Leupold scope. Please text me for fastest response. $1800

categories:Sporting GoodsGuns

3048 impressions

216 views

I'm back to printing and selling my 3d printed ammo cases! Each case holds 100rds. The standard cases are for 22lr / short and are unmarked (unless added on), and the .17HMR and .22 WMR cases have sunken in labeling on the side. Colours can be mixed and matched to make them as custom as you’d like, nothing beats an ammo case that matches the rifle! Each case consists of 1 box, 2 inserts and 1 lid. ————pricing———— 50rd .22LR cases - 8$ each (minimum of 2 required). +1$ each for ammo type or brand printed on lid. .22lr /.17Mach2 case - 12$ each. +2$ each for ammo type or brand printed on lid. +2 for Labels on sides or ends. 200rd .22LR cases - 24$ each. Comes with 4 inserts. +3$ each for ammo type or brand printed on lid. +2$ each to fill labeling with black or white epoxy. .17HMR / .22WMR - 14$ each. +2$ each to fill labeling with black or white epoxy. +2$ each for ammo type or brand printed on lid. Custom Designs, Filament types and other add-ons can be discussed as well! The more custom, the better! Bulk rates available on larger orders. Most orders will be printed on demand so please allow a few days to get everything printed and shipped out. Bigger orders take more time and custom requests of ammo brand or type on lid take extra time to design and print. Shipping is on buyer. I generally use Canada post flat rate boxes but I can do up a quote based on postal code to get the best price. If you have any questions please reach out or if you’d like some photos of something not pictured. Check my ads in the near future for more 3d printed firearm items as I aim to have an inventory of handy shooting items or fun and useful projects!

categories:Sporting GoodsGuns

28168 impressions

822 views

Bought for a build but never ended up using it Henry trigger sear BIN1700

categories:Sporting GoodsGuns

11451 impressions

715 views

Most are new as I ended up with doubles. $100 for all shipped. Would trade for sleeve of federal 210M

categories:Sporting GoodsGuns

3682 impressions

548 views

Includes both outer original boxes and box end tags as shown, inner box for Alberta was destroyed, Inner box for Sask is good with minor wear as shown. Both guns are 100% unfired and MINT. Matching serial numbers as shown.  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

16479 impressions

649 views

Bought this for a backpack camping gun but ended up not using it very much only 2 boxes of shells through it must have pal license up to date.

categories:Sporting GoodsGuns

9259 impressions

893 views

For sale is excellent condition(glass perfect) high end long range scope. 5-45x56 PM Il High Power LP P4FL 1cm CCW DT27 MTC LT / ST ZC CT Will include Tier One Medium mounts (as pictured) or Spuhr 4602 high mount May consider partial trade for Swarovski ATC spotting scope Z8 3.5-28x50, or S&B 3-18x42 Meta

categories:Sporting GoodsGuns

2834 impressions

345 views

Selling new pack of Hornady 22-250 brass. Contains 50 pieces. Was purchased from hawkline brass a while back and ended up selling the rifle it was meant for. Call or text.

categories:Sporting GoodsGuns

3410 impressions

106 views

Savage model 10 trophy hunter xp chambered in 223. This is NOT an axis, far better quality on the model 10 action. Detachable 5 shot magazine Wood has marks and so does bluing, not bad at all, see photos. Still puts 5 shots touching at 100yds. 750$ Could leave vortex crossfire hd 4-12x44mm and vortex rings on for an additional 360$. Text is best 780806803. Will look at trades for powder or projectiles, optics, or rifles with cash on my end. Located in wainwright but willing to meet for the right deal

categories:Sporting GoodsGuns

3561 impressions

309 views

Barely used. Bought it for a 9mm carbine I had that I ended up selling. Thing is basically brand new and ready for a new home! Located SE Calgary

categories:Sporting GoodsGuns

2270 impressions

162 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:Sporting GoodsGuns

14964 impressions

265 views

Like new bushnell dmr3 with the eql reticle. 3.5-21x50 ultra short scope with 34mm rings. Looking for 1900 shipped Or trade plus cash on your end.

categories:Sporting GoodsGuns

5381 impressions

631 views

765g of n120 - $100 Willing to trade for Varget or 69-77gr lapua scenar 223. Located east end of Edmonton (Capilano)

categories:Sporting GoodsGuns

4180 impressions

415 views

NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:Sporting GoodsGuns

226998 impressions

18176 views

Brand new The KRISS Vector Ambidextrous Folding Stock is the dedicated folding stock solution for the Vector Gen 2.1 (Gen II 2017). The stock is constructed of aluminum and advanced polymer composites. The KRISS Vector Ambidextrous Folding Stock secures to the upper assembly with a push button hinge that can be configured to fold to the right or the left. The stock features two QD sling swivel mounts on the left and right side, as well as a sling loop towards the rear. In addition to folding, this stock is also adjustable for length of pull, adjusting to three positions. One end of the stock is installed directly into the Gen 2.1 Vector's upper housing. The other end is the stock itself. It is not an adapter.

categories:Sporting GoodsGuns

3312 impressions

503 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:Sporting GoodsGuns

87748 impressions

2571 views

Hi guys, I have here a USA made level 3a custom armor group ballistic helmet for sale. OD green color. Size large. It has a few paint scuffs from a caving adventure but zero impacts or damage. I recently replaced the padding with brand new 4d hive memory foam padding which is a 100x improvement. Sooooo much more comfortable now. Has adjustable chin harness and I will include a helmet bag. I paid 750 for the helmet and 150 for the padding upgrade. I would like it sold before end of march so please make me a reasonable offer! Pal required for body armor in alberta. Shipping on buyer. Text is best way to contact. Thanks for looking.

categories:Sporting GoodsGuns

3237 impressions

544 views