Extremely rare Smith & Wesson double action favourite model.  approximately 1000 of these produced this one was sent to Berlin in 1887. This revolver still retains over 90% of the original nickel finish comes with a very nice set of pearl grips, the action functions perfect both in single and double action with excellent lock up and timing. Don’t miss an opportunity to own this extremely rare Smith & Wesson Antique. It comes with the RCMP, FRT document and the Smith & Wesson history letter. 

categories:GunsSporting Goods

8279 impressions

452 views

Smith & Wesson new model double action no 3 .This revolver still retains about 75% of the original nickel finish comes with a very nice set of pearl grips showing a little bit of were but no chips or cracks. The action functions very well in single or double action with good timing and lock up  still  lots of strong visible rifle but minor typical black powder pitting, it has a 6 inch barrel chambered in 44 Russian caliber  as well as a long cylinder , 1-9/16” This is an  revolver and you do not require PAL to purchase it. RCMP, FRT documents included.

categories:GunsSporting Goods

9117 impressions

492 views

Extremely rare Smith & Wesson No 3 chambered in 455 Eley with target sites and a 1-9/16 inch cylinder Was a special order. This revolver still retains about 75% of the original bluing it comes with a 7 1/2 inch barrel checkered walnut grips showing where but good condition no chips or cracks. The trigger set is amazing. This revolver is one of twelve ordered and shipped to Birmingham England in 1905, this revolver frame was produced prior to 1888 as documented and is considered an Antique status in Canada. Smith & Wesson factory letter included. PAL not required

categories:GunsSporting Goods

75143 impressions

4291 views

Very rare Remington model 1875 SAA in 44 Remington caliber. This revolver still retains about 75% of the original nickel two piece wood grips show typical ware but no chips or cracks. The action is very crisp and functions correctly with excellent timing and lock up., the bore shows typical black powder pitting, but lots of strong visible rifling This is an antique and you do not require a PAL to purchase this firearm. RCMP, FRT document included.

categories:GunsSporting Goods

53680 impressions

3632 views

Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Savage and Lyman Montreal Sword This company name was used by the Montreal silversmiths Savage and Lyman between 1868-1878. The left side of the blade immediately in front of the guard Is marked Savage & Lyman Montreal Within the engraving on the left side is a Crown.  Believed to be indicative of Queen Victoria. The right side of the blade has a small brass insert which says PROOF.  Wilkinson Sword introduced these Proof Discs in 1844. In the engraving on the right side of the blade is the word ARTILLERY The guard is steel and has fish skin wire bound grips with most of the fish skin having been worn away.   Length of Sword – 40 1/2” Length of Grip including the Guard – 5 1/2” Blade Length – 34 1/2”   Savage & Lyman Montreal (or Savage & Lyman and Company) were manufacturers and suppliers of swords, known for military pattern swords like those for Canadian militia units (e.g., 1st Battalion Chasseurs Canadiens), marking them as producers/sellers, though like many firms, they likely had blades forged elsewhere (perhaps by specialists like J. Martin in Montreal) and then finished, hilted, proofed, and sold by Savage & Lyman in Montreal, a common practice for armsmakers then.  Key Points: Evidence of Manufacturing: Swords clearly marked "SAVAGE & LYMAN MONTREAL" exist in museum collections, showing they were a recognized name in arms. Role: They functioned as an arms dealer and supplier, customizing and selling weapons for Canadian military and militia. Production vs. Supply: While they might not have forged every single blade from raw steel in-house, they were responsible for the final product, including proofing and adding their own markings, as seen on a 1885 Chasseurs Canadiens sword. In short, they were a key player in the Montreal arms trade, making/selling quality military swords, even if blade forging was sometimes outsourced to other specialized smiths.    $500.00 Or Best Offer   Thanks,  Phil

categories:GunsSporting Goods

3206 impressions

123 views

Very nice case pair of Antique Remington 41 calibre rim fire Derringers. They are both in very good condition function as designed with good springs and trigger release. The grips appear to be pearl or bone I’m unsure but they in very good condition. I would prefer to sell as a set, but would consider offers for a single one as well.

categories:GunsSporting Goods

5088 impressions

313 views

Hogue Grips for Walther P-5

categories:GunsSporting Goods

23618 impressions

498 views

Can ship via regular mail for the asking price

categories:GunsSporting Goods

25935 impressions

660 views

Selling my Howa 1500 with a MDt chassis. It’s chambered in 308 win. Has a 22 inch threaded barrel, vortex rings holding a Burris 3-9x50 scope. Comes with MDT quick thumb screws for easier and quicker adjustments. 2 polymer MDT mags 5 and 10 rounds and 2 different color MDT grips. Rifle only had 2 boxes of shells through it before the build and hasn’t been fired since. Looking to sell to purchase a lever action. Must have Valid PAL and all transfer requirements will be followed. I have over $2400 invested in this setup. Asking $1700 or best offer

categories:GunsSporting Goods

1734 impressions

146 views

1911 lazar grips $300 (2)CMR-201 Lazar sights(mount front rail)$150 (1)CMR-202Tactical light $100 All items are new !!

categories:GunsSporting Goods

9137 impressions

265 views

Pachmayr Grip (Presentation) for S&W $40.00 Pachmayr Grip (Gripper) for S&W $40.00 Take both for $60.00 Payment by cash at pickup. No other means accepted!

categories:GunsSporting Goods

2338 impressions

176 views

Forehand & Wadsworth Terror Model in 32 Rimfire, 3" barrel, 6 shot capacity. F&W was known for their unique model names and "Terror" was no exception! The action functions well on this piece. Half and full cock work well. Timing and lockup are good. Bore and cylinder walls show wear common to a vintage 32rf. Exterior shows scattered surface rust that would clean up. Original grips show expected wear, right panel has 2 notches. Cylinder pin release works well. HAS BEEN TEST FIRED! Shoots well. 32 Rimfire is easy to reload for with minimal tools. Antique status in Canada, no PAL required to purchase or own. Will include an RCMP FRT printout showing antique status in Canada. $500 includes Free Shipping. If you have any questions or need more pictures or video please feel free to ask.

categories:GunsSporting Goods

980 impressions

84 views

Very nice original condition Merwin and Hulbert seven shot revolver, this revolver is chambered in 32 H&R caliber. This revolver still retains over 95% of the original nickel finish, the two piece hard rubber grips are original and in excellent condition with no chips or cracks. it also features a folding hammer, and is in excellent mechanical condition with perfect timing and lock up. This is an antique and you do not require a PAL to purchase it. comes with RCMP,FRT document.

categories:GunsSporting Goods

27455 impressions

1168 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12400 impressions

437 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

11619 impressions

667 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12324 impressions

375 views

one pair of beatifully striated LEFT hand target grips to fit beretta 92 and clones and 1 set of mahogony and 1set of walnut grips to fit 1911a's and clones $50 for lefthand [cost me $85us ] and $20 each for the 1911 's all have not been used removed when sold NO texts 825 760 4289

categories:GunsSporting Goods

18068 impressions

404 views

The aluminum grips I have are machined from billet. Here is what I have left. All chassis, rails, mag releases and quick pins sold. 3-Stinger 556 1/2”x28tpi Muzzle brake $125 1-Stinger 308 5/8x24tpi Muzzle brake $125 1- Fury billet alum grip $125 Rare item, don’t see these anywhere, and all items are new in box.

categories:GunsSporting Goods

26152 impressions

1542 views

Cal: .41 long colt Finish: Retains 80% of its finish with loss being in the grip area. Mechanics: Action functions well in single and double action. Good advance and lock up. Bore: Bore on the factory 3” barrel is dark with some light pitting at the throat. Stock: Grips are in excellent condition

categories:GunsSporting Goods

13276 impressions

998 views

I have for sale a Remington Vest Pocket single shot derringer in .41 rimfire. This little beauty retains approx. 75% of its original nickel finish. Mechanics are excellent with strong springs and crisp action. Bore on the 4″ Barrel is shiny with strong sharp riffling. Saw handle grips are in great condition. Price includes shipping. Comes with an RCMP FRT report with this guns serial number on it showing status.

categories:GunsSporting Goods

23593 impressions

1453 views

Belgium made british bulldog type revolver chambered in 455 webley. Finish is gun metal grey with some blue left in protected areas. Mechanics function well in both double and single action. Bore on the 3" barrel is good with aggressive rifling. Grips are in fair condition with some bruises. No chips, cracks or repairs. It has what appears to be a rack number stamped on it in a couple places ( Z537).Price includes shipping and it will come with an RCMP FRT report with this guns serial number showing status.

categories:GunsSporting Goods

18896 impressions

823 views