Leather in Alberta

Browse ammo, gun accessories, parts, as well as new and used non-restricted and restricted firearms for sale in Alberta.

Popular search terms:

Photo of British Pattern 1853 socket bayonet with leather scabbard
$125.00
British Pattern 1853 socket bayonet with leather scabbard
British Pattern 1853 socket bayonet with leather scabbard This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. The blade is in good solid condition but is badly tarnished. The scabbard is in fair condition. The bottom brass below the frog hook is pulled free from the leather scabbard. The brass tip on the scabbard wiggles a bit but is still solidly attached. The stitching on the scabbard in the last 3 ½” above the end cap is partially missing but the scabbard is solid and not separating. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. This stamping is difficult to see. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/8” Length of Bayonet – 20 3/4” Length of Grip including the Guard – 3 5/8” Blade Length – 17 1/8” $125.00 Thanks, Phil
categories:GunsSporting Goods
641 impressions
33 views
St. Albert, AB2 days ago
Photo of Remington New Model Police Model 1865 38 Rimfire Conversion Antique Revolver
$2250
Remington New Model Police Model 1865 38 Rimfire Conversion Antique Revolver
Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:GunsSporting Goods
15483 impressions
867 views
Calgary, AB4 days ago
Photo of WW2 1940 Original Canadian WWII P37 canvas holster
$80.00
WW2 1940 Original Canadian WWII P37 canvas holster
Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.
categories:GunsSporting Goods
9194 impressions
165 views
Chestermere, AB4 days ago
Location
Find places in Alberta within
of
auction, garage sale, or moving sale

Having a garage, estate, or yard sale?

Create an ad event to promote an auction, garage sale, or moving sale.

Item Type
Firearms39Parts9Optics1Storage1
Gun Type
Handgun13Rifle7Other3Shotgun2Replica-or-Deactivated2
Action
Bolt11Revolver8Lever7Semi-automatic5Single-shot5Pump2Automatic1Double-barreled1
Caliber