Popular search terms:
Optics in Alberta
$120
BNIB Trijicon Glock standard frame DI night sights and Trijicon small frame fiber optic sightsI have several brand new in box Trijicon glock sight sets up for sale as follows:
Trijicon standard frame glock DI night sights(multiple available): $120.00 plus shipping
SKU: GL801-C-601102
Trijicon small frame glock fiber optic sights(multiple available): $75.00 plus shipping
SKU: GL713-C-601029
Shipping is on the buyer
Local meet up available central alberta
EMT for payment or cash for face to face deal
categories:Sporting GoodsGuns
5901 impressions
535 views
Red Deer, AB1 year ago
$89.95
Optic mount for factory (non optic cut) pistol slidesIntroducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock.
To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/
This system allows the user to install an optic on a slide that does not have an optic cut.
Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on!
This mount allows for mounting of any industry standard RMR footprint optic.
We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower.
The Glock mount is compatible with the following models:
9mm – G17,G19,G26,G34,G45
10mm Auto – G20,G29
.357 – G31,G32,G33
.40 SW – G22,G23,G24,G27,G35
.45 G.A.P. – G37,G38, G39
.45 Auto – G21,G30,G36,G41
This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models!
The Beretta mount is compatible with the following models:
M9
M9 Exclusive
M9A1
M9A3
M9A3 Black
M9 22lr
92 Fusion Black
92 Fusion Blue
92 A1
92 Compact
92 Compact w/ Rail
92 Compact with Rail Inox
92 Vertec Inox
92FS
92FS Fusion
92FS Inox
92FS Brigadier
92FS Brigadier Inox
92G
92G-SD
92G Elite
92X Centurion
92X Compact
92X Compact w/ Rail
92X Full Size
98A1
98FS
98FS Inox
90 Series Inox
This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to):
ANY Beretta Optics Ready Models
92FS Centennial
92 Performance
92 Performance Defensive
92 RDO Compact
M9A4 Centurion
Taurus 92
Color: Black
Material: 4340 Steel
Kit includes:
1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail
2x Expander screws
2x Optic retention screws
1x HEX driver
categories:Sporting GoodsGuns
29246 impressions
1135 views
Onoway, AB1 month ago
$250
Vortex Crossfire II 3-9x40 + Vortex Optics Pro Series Rings🔭 Scope Details:
Model: Vortex Crossfire II 3-9x40 (V-Plex Reticle)
Condition: Installed less than a year ago, purchased from The Shooting Centre on October 28, 2024.
Features:
Magnification: 3-9x
Objective Lens Diameter: 40 mm
Tube Size: 1 inch
Field of View (at 100 yards): 34.1 - 12.6 ft
Parallax Setting: 100 yards
Fully multi-coated lenses for excellent light transmission
Waterproof, fogproof, and shockproof
Fast focus eyepiece
Lifetime Vortex VIP Warranty
🔩 Ring Details:
Model: Vortex Optics Pro Series Rings (1" Low, 0.75" / 19 mm)
Condition: Excellent, installed with the scope, includes original screws and Torx key
Material: 7075-T6 aircraft-grade aluminum
Mount Type: Compatible with Weaver and Picatinny rails
Made in the USA
Torque Specs:
Base: 30 in/lbs
Ring screws: 18 in/lbs
💰 Price:
Complete Set: $368 CAD
Scope Only: $249 CAD
Rings Only: $119 CAD
📍 Location:
Calgary, Alberta
Local pickup preferred, but shipping within Canada is possible at buyer's expense.
categories:Sporting GoodsGuns
3407 impressions
610 views
Calgary, AB6 months ago
$110
Brand new Bushnell AR Optics Hi Rise Mount Aiming Laser $110Brand new
The Bushnell AR Optics Rush is a hi-rise mount with built-in laser sight for close quarter environments.
The integrated, offset laser saves space on the rifle, and projects a continuous, powerful red beam with one push of a button.
It replaces your existing mount, and is compatible with any optic that can be mounted on a picatinny rail.
Offset laser
Easy battery replacement
One-button operation
Waterproof
Color: Black
Battery Type: CR2
Batteries Included: Yes
Laser Color: Red
Output: <5mW
categories:Sporting GoodsGuns
1498 impressions
336 views
Calgary, AB1 year ago
$200
Brand new Mastermount Rear Biased Optic Mount $200Brand new
Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g.
The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself.
It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA.
Dual-Axis Locking
AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis.
The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis.
These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability.
Low Axis Over Bore
The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed.
The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained.
Built Rugged As the AK Itself
The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics.
Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking.
No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release.
Accessory Side Rail
Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories.
Compatibility
The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder.
Greater Optics Versatility. Superior Finish.
A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base.
The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.
categories:Sporting GoodsGuns
6261 impressions
614 views
Calgary, AB1 month ago



