Steel gas block, non-adjustable, .750" gas journal $20 * Mid length gas tube $20 Rifle length gas tube $5 (silver) Rifle length gas tube $8 (melonite/black) Anderson Charging Handle $20 H carbine weight buffer $30 H2 carbine weight buffer $40 H3 carbine weight buffer $50 LBE 223/556 Bolt, firing pin, cam pin kit $125 Hammer/trigger pins $5 (for a set of 2) Magazine catch and spring $5 Bolt catch (includes spring, roll pin and detent) $5 Buffer detent $1 (no I do not have detent springs) Takdown/pivot pin spring $2 Trigger guard $2 Faxon 18.6" barrel w/ adj gas block and gas tube (installed but not used) $300 Crush washer for 1/2" diameter threaded muzzle devices $2 1/4x28 3/4" length bolt $2 Anti-walk pin kit $20 15" mlock handguard $120 Vism mid length triangular aluminum handguard $40 _____________________________ With the exception of the barrel, all parts will be shipped in a canada post pre paid box for $19. Unless noted, all parts are new. Pick up available in SE Edmonton; minimum value for pick up order is $20 *can be installed sideways to block the gas port for renegade builds

categories:Sporting GoodsGuns

13438 impressions

607 views

For Sale - one original Tara TM9 9mm pistol 10rd cap. magazine $55 - firm! 1 available Condition: Brand new - loose (no packaging) / not used or loaded / 17rd cap. mag crimped to 10rd (view picture attached). EMT or cash - Remote pick up available by appointment only (cash) or house drop box or shipped (emt) at buyers expense within Canada only. Small package/tracked, all provinces - $22 Text, email, or leave message No trades, offers or deals at this time! All sales are final. If this ad is still up then item is available

categories:Sporting GoodsGuns

28455 impressions

1454 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - $150 Dust cover, Chinese unmarked - $40 (1 available) Long Recoil spring, complete - SOLD OUT Short spring - $15 (1 available) Short piston - $28 (1 available) Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Tapco ODG Synthetic stock with 6 position stock (not ATI) black handguard, black molded plastic (gas tube not included) - $250 (picture to come) Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $22 Payment by EMT (shipped) or cash (F2F pickup)

categories:Sporting GoodsGuns

43580 impressions

1536 views

i’m looking for mini 14/30 parts, mags, folders, collector items

categories:Sporting GoodsGuns

1307 impressions

113 views

looking for SVT 40 parts, mags, optic mounts and gun parts

categories:Sporting GoodsGuns

1347 impressions

100 views

i’m looking for VZ 52/57 mags and gun parts anything collectable in 7.62x39

categories:Sporting GoodsGuns

1480 impressions

96 views

Some henry 410 lever action parts , stocks have some dings and scratches but all the other parts are like new. Pal for the barrel and shipping on the buyer.

categories:Sporting GoodsGuns

4298 impressions

235 views

Bought as a possible project but I changed my mind. Doesn't have a bolt or magazine. 23inch barrel, seems to have decent rifling but it's pretty dirty. Trigger feels decent, hopefully there are some other parts somebody can use.

categories:Sporting GoodsGuns

2752 impressions

352 views

New in box Masai Mara 20 gauge, 3inch 28 inch barrel. 5 chokes, choke key, lube, manual. 1300obo make an offer. May look at trades

categories:Sporting GoodsGuns

5358 impressions

375 views

Retay Masai Mara 20ga 3inch 28inch barrel in extra black. New in box never been fired. Comes as seen. 5 chokes, choke key, manual, stock shim adjuster plate. No need to purchase extras. 1200obo 587.876.0338

categories:Sporting GoodsGuns

5225 impressions

543 views

I’m looking for Sks parts Gas tube handguard Magazines Factor or after market SKS pistons Spike bayonet kit After market replacement gas piston spring Mainspring Dust cover And any other parts

categories:Sporting GoodsGuns

12402 impressions

274 views

Looking for bolt and free floating firing pin or other SKS parts. Please let me know that your asking price is. I’m located in Calgary.

categories:Sporting GoodsGuns

15018 impressions

439 views

Remington 12 premier model 1187 for parts.

categories:Sporting GoodsGuns

6423 impressions

305 views

Need some Sks parts.. the piston rod spring and piston rod and a goood gas tube and a good arctic birch stock.

categories:Sporting GoodsGuns

14479 impressions

256 views

Wanted parts for old Stevens single shot shotgun

categories:Sporting GoodsGuns

5800 impressions

706 views

Looking for a pistol grip, charging handle (full assy with the stud, spring, bearing and cover) and mag for my rifle. Please text me at 780 804 4539 as I don't frequently check on here. Parts would have to be shipped to Fort McMurray, Alberta. Thanks

categories:Sporting GoodsGuns

4584 impressions

355 views

Russian Svt40 parade bayonet! New! No scabbard.

categories:Sporting GoodsGuns

11289 impressions

1348 views

Parts Only Canada is your source for quality gun parts and accessories in Canada. We offer aggressive pricing on our products; you are unlikely to find a better deal! All orders above $250 (before taxes) ship free! www.partsonly.ca Customer satisfaction is our top priority. We go the extra kilometer to offer quality made gun parts, reliable shipping, and prompt service; earning the loyalty of gun enthusiasts across Canada. Our product lines are primarily aimed at sport/target shooters. Most of the items we sell are USA made. Some of the brands we offer include: Magpul, ATI, ProTech/Archangel, Bravo Company Manufacturing, Uncle Mikes, MDX, OEM Ruger, OEM Glock, PSA and similar. We support platforms like the Mossberg 500, Ruger 10/22, SKS, Glock, etc. If you have a request for a specific part that isn't on our website, please send us an email at info@partsonly.ca with details including a product code or part number. We'll see what we can do to get what you need! We receive our shipments about every 6 weeks and are happy to add your parts to our order. You must be age 18+ to order from partsonly.ca. You must read all terms and conditions of use before placing an order through our website. Applicable tax applies on all orders. www.partsonly.ca

categories:Guns

40147 impressions

3565 views

Professional scope mounting in Sherwood Park. - leveled - torqued - laser bore sighted Some rings and scopes on hand. Can also help to build a ballistic turret or set up data for a stock MOA turret Can add accessories. Can do complete rifle tear down and cleanings. Can sight in rifles and do barrel break ins. Red Dots. Custom Elevation Turret Builds. Sherwood Park. Available most weekends and evenings.

categories:Sporting GoodsGuns

17419 impressions

1946 views

Assorted gun parts and rings and bases for sale. Remington Triggers for 700 action, even one for a left handed rifles action. All are from factory guns. Three NEW!!! Are Brand new. One Left and 2 Right complete triggers with bolt stop and trigger lock for the bolt. 175.00 FIRM One used 50.00 no bolt or trigger lock up or any other parts.!!!! Rings and bases from Leopold and Weaver. You Have To Buy The Complete Package to Get This Deal!!!! No Exceptions.......... And I do not have any other gun parts for sale. Thanks Also have Husky Gun Info if your needing any help with the info on a Carl Gustaf Rifle Husky 8000 jeweled and trigger adjustment also. Mint!!!! 3000.00 plus with scope and 2 rifles barrels and some. Some parts are already sold,Thanks Gene

categories:Sporting GoodsGuns

58615 impressions

5191 views

have been focused on gun parts lately, helping people out on their trigger guards, pic rail, barrel band, grip etc. let me know what's broken on your firearm or parts gun and I'm sure we can have it fixed for ya.

categories:Sporting GoodsGuns

19348 impressions

2086 views