This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. He actually used most of the guns in his gun safe. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling. This rifle stock has been hand built. Serial # 630791 which means it was built in 1942. Comes with 56 rounds of ammunition. Clean bore. In very nice condition.

categories:GunsSporting Goods

12317 impressions

680 views

Highstandard supermatic Duck modle c1211. Made in hamen, conn. usa 12g 2 3/4" and 3" magnum only. 29 1/2" barrel, about 14 1/4" lop, left side bolt release wich is a nice feature. Overall very clean, very minor safe marks, blueing is 98%, jeweled bolt very nice shape and shoots well, very minor use, barrel looks shinney new. Will ship on buyers cost.

categories:GunsSporting Goods

4804 impressions

481 views

Very nice Win. Model 70 CRF Super Grade (American Made) 30-06 Spr. High grade stock, very good figure, dark walnut and ebony fore tip. Slight safe kisses on butt stock. Shown in pictures. 24" barrel High gloss bluing. Never fired by myself. Does not come with scope. Does come with Scope base. (Leupold) P.A.L. Required and Verified!! Shipping and Insurance on byer. Cash or EMT only. Contact by Town Post Mesg. or Phone: 403-845-4102

categories:GunsSporting Goods

6761 impressions

586 views

Really nice shape. some safe kisses. Works flawlessly. Located in edmonton. Will look at local trades. Comes with two magazines and a mint bushnell scope chief IV installed but not sighted in. Price is firm

categories:GunsSporting Goods

2526 impressions

270 views

Ridgeline gun safe in new condition, holds rifles as well as hand guns on the door & shelving for all your hunting needs. Have feet that you can attach or use the holes to anchor it down. Delivery availible .

categories:GunsSporting Goods

12397 impressions

671 views

Beautiful Browning model 1895 chambered in 30/06. This was part of a limited run of 6000 rifles manufactured in the mid 1980’s. This one has seen very little use and mainly sat in the back of the safe. All original factory finish and high gloss deep bluing. Minimal marks on wood and only a couple blemishes in the bluing. Has a Providence Tool company version of the Lyman #21 peep sight referred to as the “ climbin Lyman “. The sight alone is worth over $200 and is included. More pics to your email on request. ****WILL BE IN EDMONTON SATURDAY AND COULD MEET" Price $1675.00 if picked up , shipping available. Local pick up available.

categories:GunsSporting Goods

7157 impressions

434 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

70793 impressions

2177 views

Selling a cooey model 60 in decent shape. Been in a safe for the last 10-15 years. $300 Firm Pick up in Sherwood Park Valid PAL required

categories:GunsSporting Goods

5240 impressions

281 views

New Ultimate rifle build bore snake embedded brass brush 30cal 303, 30-06, 308, 7.62 Solvent Safe, Machine Washable & Reusable Hundreds of Times Cleans in One Quick Pass

categories:GunsSporting Goods

17321 impressions

362 views

Cool gun it’s an Antique no pal needed it must be 18 years or older to buy it needs to be gone through before it can be safely functional

categories:GunsSporting Goods

1544 impressions

198 views

Selling off my tikka build in .308. Parts list with retail prices in photos. Rifle is 3-4 years old. Has roughly 300 rounds through it which is the reason I’m selling. I just don’t use it and hate having it live in the safe. Quick breakdown is…. Tikka t3x stainless varmint, MDT ESS chassis, sig tango4 6-24x50 FFP MRAD, Cadex mx1 brake (barrel has been threaded). Nanuk 995 Case with TSA locks Included. Asking price is 4600$. 3600$ if you don't want scope or rings. Shipping is available on buyer. expect 60-80$. Rifle will ship in the case with new combo locks attached. Ammo is available for sale too. I believe there are 6-8 boxes of Hornady 168gr custom match.

categories:GunsSporting Goods

7664 impressions

318 views

Have for sale a hard to find new Savage 93R17 (17 HMR) BSEV bolt action rifle w/ accutrigger & Skeleton laminated red stock (very light) w/ spiral fluted stainless steel barrel (21”) and action. One 5rd chrome mag included. $1000 - firm PAL is required and will be verified. Rifle is brand new, unfired, no box, has 2 piece scope mounts installed (chromed). May have a scuff or two on stock from being a safe queen but nothing else, and can be easily buffed out. A beautiful rifle! EMT(shipped) or cash(pickup)- at buyers expense within Canada only & tracking number provided

categories:GunsSporting Goods

9163 impressions

576 views

I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2403 impressions

127 views

Clymer 45 ACP.     No Go.            $65 Forster 223 rem.  Field                  $65 I bought these to simply make sure the headspace had not grown too big. I did not get the 'go' gauges as that defines the minimum headspace and I was looking out for headspace growing with usage of the gun. Primarily for when I was searching for guns to purchase.  The field gauges indicate maximum safe headspace in used guns, i.e. slightly larger than the SAAMI as manufactured. If a 'Field' gauge will chamber, don't shoot the gun.  I'm not sure if I ever actually used these. They are in as new condition. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

3461 impressions

144 views

Instead of Calibre specific micrometers I use a different system. So this is simply not used anymore and available to you. Check out what RCBS says on their website about using these: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

2750 impressions

144 views

1950s mauser action 270 Winchester. Clearing out some room in the safe. $350 without the scope and rings $475 with the tasco 3x9 illuminated scope Local sale

categories:GunsSporting Goods

3289 impressions

554 views

Have this .22 sitting in my safe. Don’t know much about it. Make an offer

categories:GunsSporting Goods

2823 impressions

317 views

As the title states I have a Vortex Viper PST Gen 2 5-25X50mm MOA reticle FFP. Has seen less than 100 rounds, As New condition, spent its life in the safe. Comes in its original packing with everything included. Probably still have the original receipt New the scope is 1699 plus tax with 2”sunshade 50$ rings 50$ butler creek flip up caps 87$ for the vortex scope bubble level =over 2k taxes included. Would like to see 1500everything included Open to trade offers, rifles, scopes, primers, powder, 30cal projectiles text me your offers never hurts to try. Located in Wainwright Alberta

categories:GunsSporting Goods

7475 impressions

534 views

Rifle is in new condition , Monte Carlo stock, machined pic rail on reciever,when they still built them right, low round count , muzzle break included, Swaro Z5 3.5-18x44 optic with ballistic turret. Shoots very small groups,with factory ammo, has become a safe queen. Also I found acuople of boxes of the factory ammo which would be included.Pelican case included

categories:GunsSporting Goods

57829 impressions

2780 views

M98 9.3x62 Husqvarna mauser. Blueing in decent shape Custom walnut stock with bedded action. Cheaper 3-9x40 weaver scope but it does and did do the job! Leupold rings. Bore is in excellent shape. Very shiny. Timney trigger. 24" barrel Asking $900 OBO M96 6.5x55 Husqvarna mauser. Worn bluing Excellent bore. 24" barrel Asking $400 OBO Two side mounts with screws for the M96 but I never used them Preferred the irons. Asking $150 each. Both rifles work very well its just time to clear the safe out a bit.

categories:GunsSporting Goods

7591 impressions

926 views

For sale: Made In Berlin, Germany as a custom order in 300 win mag 24" barrel. Gorgeous custom wood stock, fit to action and barrel, rifle shoots amazing from the cheap standard box ammo to the expensive, it groups very well. Only ever used boxes of factory ammo as Ive never shot the rifle much, Had it out hunting one season but has sat as a safe queen since. Federal Blue 180 sp, Herters 180 SP, Federal Terminal Ascent 200, Federal Berger Hybrids 185, Horandy ELDX 200 Rifle comes with Talley bases Round count est. around 100 Weight: 7lbs 15oz (call it a even 8) with Talley rings and a Swarovski/vx3 your're sitting around 9-9.5lbs Rifle Good- Very Good condition couple marks on rifle as shown in pictures but nothing crazy, Finish is very clean all around Posting lots of photos, more can be taken as per request, ask as many questions as you want and I will try my best to answer them. A New m98 Magnum Mauser last retailed for 10,000 some years go. Im guessing now they are alot closer to 13K $5850- shipping and insurance can be discussed for serious buyer. Im not in a rush to sell this nor no need to sell, I just don't use it anymore and would like someone else to enjoy it.

categories:GunsSporting Goods

4084 impressions

215 views