Looking to Buy, New or used, dont care how beat up, Factory synthetic stock with adjustable cheek rest for Tikka T3X heavy barrel. any leads to where to find one also GREATLY APPREACIATED

categories:Sporting GoodsGuns

4903 impressions

192 views

Low round count, excellent conditionTaipan .223/5.56, pump and straight pull rifle. Takes standard AR 15 magazines, adjustable cheek rest, 16" treaded stainless barrel. Comes with one mag No trades on this unit and will ship at buyers expense 1100.00 OBO Text is the fastest way to get ahold of me

categories:Sporting GoodsGuns

1194 impressions

143 views

Has been a fun gun to shot. Great for long range and never failed on a hunt. Defiance action in 7mm wsm with a long shot precision barrel that is fluted can you reduce some weight. There is a 10° break installed, which relieves almost all kick. It all rests in the McMillan stock with adjustable, cheek rest. For optics it is an nightforce NXS 5.5-22x50 scope. Some brass for reloading will be included

categories:Sporting GoodsGuns

19215 impressions

1696 views

Winchester xpr in 243win Has a added adjustable cheek rest Vortex crossfire 2 scope I also have some ammo

categories:Sporting GoodsGuns

8770 impressions

487 views

Boasting a spring-loaded front height adjustment knob, Caldwell’s Stinger Shooting Rest makes one-handed elevation changes a breeze. Non-marring front and rear moulded cradles protect your gun’s finish, while ensuring slip-free performance. Heavy-duty metal frame features cam locks so you can slide it back and forward to the perfect position, then lock it into position to fit any shooter. I bought it for 199.99 + tax at Cabellas https://www.cabelas.ca/product/96554 New condition, used only once. I will ship it on your dime Thanks

categories:Sporting GoodsGuns

4195 impressions

366 views

New in box 6.5 prc Sauer 100 Cherokee. 5+1 round. The 6.5 Precision Rifle Cartridge (PRC) is a rifle cartridge designed for accuracy, extended range, and flat trajectory. It's a compact cartridge that's used for hunting and has been used to hunt elk, deer, bear, and antelope PREMIUM COMES STANDARD • CERAKOTE coating on barrel, action and bolt knob • Neutral cast for both left- and right-handed shooters • Cold hammer-forged SAUER barrel • Three-position safety • 60-degree bolt lift • EVER REST action bedding • Trigger adjustable from 2.2 – 4.2 lbs • Double-stack magazine • 5+1 round capacity in standard calibers • Suitable for the SAUER HEXALOCK mount • Ultra-rugged MAX synthetic stock • Barrel length: standard 22”, magnum 24” • Taper: standard 0.67“ • Muzzle thread: optional M15 x 1

categories:Sporting GoodsGuns

13726 impressions

563 views

Caldwell® Matrix Shooting Rest Hardly used, like new. • U-channel frame quickly adjusts up to 4-1/2" • Open center channel provides plenty of clearance • Spring-loaded tension mechanism and height-adjustment Ultra-rigid U-channel frame quickly adjusts up to 4-1/2" in length to stabilize any gun, from a handgun to an AR-15. Open center channel provides plenty of clearance for high-capacity detachable magazines. Removable lid on the convenient storage area in the front of the base adds additional clearance when detached and doubles as a rubberized rear support surface when firing handguns. The front elevation system has a spring-loaded tension mechanism and a height-adjustment knob for precise one-handed elevation adjustments. Remove the rear portion of the frame to convert it into a compact front rest. Dimensions: 16.5 x 42 x 49.5cm (6-1/2" H x 16-1/2" W x 19-1/2" D). Front cradle height: 7-1/2" to 10-1/2". Weight: 5 lbs.

categories:Sporting GoodsGuns

674 impressions

148 views

Brand New. 6.5PRC. Not in box. No trades. Here is info from website. The SAUER 100 raises the standard for entry-level rifles. The compelling features of the S100 include an adjustable single-stage trigger, three-position safety, German Cold Hammer-Forged original SAUER barrel, a famously smooth SAUER bolt, and now paired with an HS Precision Stock. The NEW S100 HS Precision Stock is “Sporter Gray” Cerakoted, Fluted, and Threaded. • CERAKOTE coating on barrel • Action and bolt knob • Neutral cast for both left and right-handed shooters • Cold hammer forges SAUER barrel • Three position safety • 60-degree bolt lift • EVER REST action bedding • Trigger action from 2.2 – 4.2 lbs • Double-stack magazine • 5+1 capacity in standard calibers • 4+1 capacity in mini and magnum calibers • Barrel length: standard 22”, magnum 24” • Suitable for the SAUER HEXALOCK mount

categories:Sporting GoodsGuns

14609 impressions

731 views

NEW Remington 700 SPS Tactical AAC chambered in 6.5 Creedmoor Never fired! - 22" Heavy Varmint barrel (black satin with 5/8-24 threaded crown for muzzle break) - Hogue OverMoulded pillar bed stock with dual-point bedding and wide beaver-tail fore-end for stable rests - Super Cell recoil pad and swivel sling studs - X-Mark Pro adjustable trigger - hinged floorplate magazine provides 4+1 rnd capacity

categories:Sporting GoodsGuns

12192 impressions

1236 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

3164 impressions

520 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2867 impressions

419 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2898 impressions

502 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4311 impressions

498 views

Savage 10FP action Benchrest gun. Built by EM Precision Alberta. MOA at 1000 m. $950 Entire chassis from MDT: Stock, bottom metal and butt stock. $700 Savage 10FP action $150 Trigger by Sharp Shooter Supply. Adjustable from 1 1/4 Ibs to 2 Ibs. $1200 Barrel Rob Jury 26" heavy barrel with 3 gill brake, 1 - 10 twist. $1400 Scope is Vortex viper Gen 1, 5-25 x 50 FFP. Sun shade. Warne Rings. $80 Tipton 40" cleaning rod x2 Jags (swab and brush). $120 Mags x2 - polymer MDT 10 RND and metal Accurate-Mag 10 RND. $150 Bipod Harris cantilever adjustable. $570 Pelican 1750 Case cut out to fit rifle and accessories. $5320 Total All ceracote black. Text 780-901-7079

categories:Sporting GoodsGuns

404 impressions

39 views