Very rare Remington model 1875 SAA in 44 Remington caliber. This revolver still retains about 75% of the original nickel two piece wood grips show typical ware but no chips or cracks. The action is very crisp and functions correctly with excellent timing and lock up., the bore shows typical black powder pitting, but lots of strong visible rifling This is an antique and you do not require a PAL to purchase this firearm. RCMP, FRT document included.

categories:GunsSporting Goods

45818 impressions

3168 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6798 impressions

270 views

Howdy Townpost. This is a nice little and good conditioned pocket tip-up revolver, in .32 RF long. These were made by Marlin from 1875-1887 with a total of 33,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's some frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the hard rubber grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6022 impressions

211 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5141 impressions

172 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5238 impressions

147 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5545 impressions

385 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11648 impressions

520 views

For sale is my a mechanically great, all matching, 1880 production short barrel "Shopkeeper" Colt Thunderer in .41 LC. Selling because cash is tight. As an Antique, this handgun is exempt from Canadian licensing and registration requirements, and can be used anywhere a nonrestricted firearm would be legal. Black powder or light load smokeless .41 Long Colt rounds can be purchased online or worked into deal. The 1877 line of revolvers was Colt's first double action model ever produced. They made almost 170,000 from 1877 to 1909 with three main designations: the Colt "Lightning" in .38 LC, the "Thunderer" in .41 LC, and the "Rainmaker" in .32. However, due to Canada's laws, only the .41 caliber ones are designated as "antique". This is luckily one of those guns, and it needs no registration or licensing to own. These models are highly collectible handguns, particularly the short barrelled "Shopkeeper" model due to its easy to stow nature. Arizona Wild West gunslinger Doc Holiday carried one of these. This particular example, SN 22261, was produced rather early in 1880 and has a short but accurate 3.5" barrel. All parts match, and the exterior retains an excellent 85% of the original nickel. The internal mechanics are incredibly clean and original. The bore is fair with strong defined rifling. Grips are nice like-new repros with rampaging Colt medallions. All hammer clicks are present, lockup is rock solid, and the trigger pull is pleasant in both SA and DA. The barrel is stamped with the Hartford Connecticut Colt address and the acid etched "COLT D.A. 41" is still visible. The left side of the frame displays the 3 line 1871, 1874, and 1875 patents. It reads "41 CAL" on the trigger guard. Can work ammo into deal with PAL No PAL required for revolver Must be 18 Comes with FRT page Ships within Canada Check out my profile for more antique handguns! I make no claims about the safety of firing ANY Antique firearm. Consult with a gunsmith first.

categories:GunsSporting Goods

14610 impressions

1005 views

Selling because cash is tight and I have another - don't miss your chance to add this beautiful investment to your collection. This superb Webley WG Army specimen was made by P. Webley & Sons circa 1896 chambered in .476 Eley and .455 Webley, and sold by the famed John Rigby & Co. in London. Established in 1775, John Rigby & Co remains to this day a staple of the fine firearms market. Their role in this piece's history adds even further to collector value. These revolvers were very popular private purchases among sportsmen and higher ranking officers around the turn of the 20th century up through WW1 as reliable, accurate, and elegant handguns. With an impressive 6" barrel and mirror-bore rifling, this is a collector's or target shooter's dream. I can add a box of 50 factory new Fiocchi Heritage .455 Webley rounds with purchase of the revolver if you have a PAL. If you don't want these rounds, take $100 off asking price. As a pre-1898 antique, this can be owned and used without any registration or headaches. Visually this revolver retains most of its original shiny dark blue finish with scattered minor loss from 130 years living. The trigger, hammer, ejector, cylinder release mechanism, and hinge screw have a shiny silver "in the white" finish giving a proud and bold contrast. The original checkered square bottom hardwood grips are solid, showing some minor dings and a tiny chip on the right. Sharply stamped "WG Army Model" on the top strap with calibers ".455/.476" Webley and Eley, and the W&S winged bullet logo on the left of the frame. The barrel is hand etched with the retailer address "JOHN RIGBY & Co. 72 ST JAMES'S St LONDON S.W.". The serial 13XXX places manufacture in the mid-late 1890s and makes this one of the most modern antiques you can get. The bore retains shiny, strong rifling with scarce patches of wear. The action functions excellent in single and double action, leaving nothing to be desired. The cylinder indexes and locks up with almost no wiggle for reliable firing and the timing is excellent. Comes with FRT antique papers and repro leather Webley holster. Can come with box of Fiocchi .455 Webley ammo if you have a PAL. Call any time or local meetup Calgary or Vancouver depending where I am. Ships Canada No PAL, 18+ Check my ads for more antiques! I make no claims about the safety of shooting ANY antique. Check with your gunsmith! (Tags: England, Britain, French, MAS, German, Reichs, American, Canadian, Dominion, .44, .45, .450, .476, ACP, Auto, Boxer, Kynoch, Smith & Wesson, Remington)

categories:GunsSporting Goods

14525 impressions

711 views

This is a Tranter Model 1863 Single Action Revolver Chambered in .455 centre fire. The majority of the model 1863’s were a double action with only a few hundred being produced in single action. Approximate serial number range for the single actions are between 4000 to 4500. This item being serial number 4010 would make it one of the first to be made of this model. The single actions were mostly produced in .442 rimfire, it is not known how many were produced in centre fire making this even more rare. This item has a 6-1/2” barrel with Cogswell & Harrison London retailer address engraved into it. Birmingham proof marks can be found on the barrel and frame. The firearm retains around 85% of the original finish. The checkered walnut grips are in excellent condition with a few very light dings. Mechanically it is in excellent condition and functions as it should. This is a very attractive English revolver that would fit well with any antique collection. this is an antique to no PAL is required for purchase. Buyer must be 18 or older and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected by a competent gunsmith prior to any form of use.

categories:GunsSporting Goods

27714 impressions

1408 views

This is a Rare Antique Remington Early Production Type I, A.K.A. The Double Derringer. Remington produced around 150000 model 95’s between 1866 and 1935. There were only around 1600 produced before the addition of an extractor. Making this one the hardest to find for collectors. This type is marked “E.Remington & Sons, Ilion, N.Y.” on one side of the barrel rib and “Elliot’s Patent Dec. 12, 1865” on the other. Later models would see the addition of an extractor and the barrel address moved to the top rib. This has a 3” barrel, is chambered in .41 rimfire and has a spur trigger. There are a a few light handling dings and almost no original finish left. The grips are in fine condition. Mechanically it is still very strong with the action working and cycling as it should. The hinges are intact. There is a slight play in the lock up which would be a fraction of a millimeter. These were carried by many people in the Wild West as they were easily concealed. Wild Bill Hickok is said to have carried a pair of these at times. This would make a great addition to a Remington collection and could be the centre piece to any collection. this is an antique so no PAL is required for purchase. Buyer must be 18 and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected prior to any form of use. Short term layaway options are available.

categories:GunsSporting Goods

30697 impressions

1747 views

This is an Antique Harpers Ferry U.S. Model 1842 Smoothbore Percussion Musket. The overall length is 57-3/4” with a 42” long barrel and coming in at just under 10 pounds. This is a .69 caliber musket. These were designed in 1842 and were produced from 1844 to 1855, with this one being made in 1849. There is a partially visible eagle over US forward of the hammer. Rear of the hammer is the markings HARPERS FERRY 1849. Inspection marks can be found on the barrel near the breech and on the trigger guard. Overall condition is very good with a low amount of handling dings and a small crack in the wood by the butt plate. Mechanically in excellent condition with a strong action. The Model 1842 was the first U.S. musket to be produced with a percussion lock. It had an effective range of 100-300 yards and a maximum range of 400 yards. The 1842 was the last U.S. regulation .69 caliber musket. Many of these muskets later had the bores rifled and saw service in the American Civil War. This would make a great addition to any antique collection of would even be suited as a stand alone piece. This is an antique so no PAL is required for purchase. Buyer must be 18 or older and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected by a competent gunsmith prior to any form of use.

categories:GunsSporting Goods

18366 impressions

1012 views

This is an antique Wesson & Harrington No.3 Second Type Revolver. It is estimated that less than 1000 of these second type revolvers were produced from 1874to 1879. This has a 5 shot fluted cylinder and is chambered in .32 rimfire. The octagon barrel is 2-3/4” long with the barrel address reading “WESSON & HARRINGTON WORCHESTER, MASS. PAT. FEB.7 JUNE 13,71”. The barrel markings are sharp. This revolver retains around 85+% of its original finish. Fire blue can still be found on the cylinder pin. The rosewood grips are in near excellent condition. Mechanically strong with proper timing and lockup. This is an antique so no PAL is required for purchase. Buyer must be 18 or older and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected by a competent gunsmith prior to any form of use.

categories:GunsSporting Goods

20814 impressions

1199 views

Calling all antique collectors or those just interested in antique collectable firearms Local St. Albert has recently acquired a huge lot up for consignment. Call the store for more information! Sights & Arms 11J Rayborn Cresecent St.Albert

categories:GunsSporting Goods

7785 impressions

662 views

Up for sale is a fully functional Bliss & Goodyear “Protector” revolver in mint condition, manufactured in Norwich, Connecticut, circa late 1870s–1880s. Chambered in .32 Rimfire. This 5-shot single-action spur trigger revolver is in perfect condition, a rare find for a piece nearly 150 years old. Original antique – not a reproduction Excellent nickel finish and clean grips Cylinder locks up properly, timing and mechanics perfect Collector-grade condition, highly desirable example This is an outstanding revolver for any serious antique firearms collector. Given its rarity and excellent preserved state, it is priced at $880 Priced to sell $880 (Can ship - $30 Flat Rate) *NO PAL REQUIRED

categories:GunsSporting Goods

2416 impressions

300 views