Antique Colt 1873 SAA chambered in 455webley for sale. Finish is gun metal grey with almost all the original finish gone with some signs of light surface pitting. Mechanics are superb with the iconic 4 clicks of a colt hammer. Advance is perfect and lock up is rock solid. Bore on the 5.5" barrel has strong rifling with some light freckling near forcing cone. Walnut grips are in excellent condition. This is antique status and will come with an RCMP FRT report, with this guns serial number on it, outlining status.

categories:Sporting GoodsGuns

7349 impressions

595 views

Cal: .455 Webley Finish: Finish is grey Mechanics: Functions well in both single and double action. Bore: Bore on the 6” barrel is dark with sharp lands and a small amount of freckling. Stock: Grip is in nice condition, possibly a replacement. This model was used by the northwest mounted police. Price includes shipping. Will come with an RCMP FRT report with this guns serial number showing status.

categories:Sporting GoodsGuns

24698 impressions

948 views

Chambering: .41LC Finish: Nickel plating is in pristine condition. fully engraved Mechanics: Excellent condition. Distinct 4 clicks of the hammer. Bore:  5 ½“ barrel with great rifling Stock: Mammoth Ivory grips are in very good condition Additional: Comes with Colt historical letter. Shipping is included in the price. Will come with an RCMP FRT report with this guns serial number detailing status.

categories:Sporting GoodsGuns

23173 impressions

1696 views

This is an antique status revolver, so no PAL required but buyer must be over 18. Comes with FRT report. Manufactured in 1877 by Manufacture d’armes de Saint-Étienne model 1873. Was originally chambered in 11MM and has been modified to shoot 45/455 Webley. This revolver is in beautiful condition and mechanically works as it should. It shoots 455 Webley nicely, I have not tried 45. All serial numbers on parts match. The bore is nice with good rifling and minimal pitting. Prefer a local sale but willing to ship on buyers dime.

categories:Sporting GoodsGuns

25600 impressions

2438 views

For sale is a beautiful antique Union Jack No3 made by Hood Firearms in the mid to late 1870's and 80's. This is a 5 shot pocket pistol chambered in 32rf with factory engraving and Ivory or bone grip. The original finish has turned to a rather appealing patina. Comes with the display box. Originally purchased by me as a project, I have found that I have not been dedicating the rime to it and have decided to pass it on. I have shot it as seen in the videos but do not recommend it as a shooter without someone doing more tinkering. Mechanically the cylinder rotates but does not always lockup without help. Once locked up there is a little play but not severe. The trigger is really stiff and half cock doesn't work meaning you need to manually hold the hammer while loading and unloading. Watch the videos for a better description. https://youtu.be/3-AhNEwaWF4?si=gUDht-iFGjO2DT_f https://youtu.be/3-AhNEwaWF4?si=snkY7ldn3OH2OuTa As an Antique Status Pistol no PAL is required however you must be 18+ $495 local, $515 shipped flat rate with $100 insurance. Text 780-242-7295

categories:Sporting GoodsGuns

1909 impressions

216 views

This is a functional scarce and unique Antique Galand Model 1868 single and double action Revolver. Designed for 7 mm Perrin which gives it antique status, this revolver happens to accept the nearly identical .32 S&W short cartridge which can be reloaded at a low cost, and can even be made from cut down .32 S&W Long brass. There are very few antiques that will accept this caliber, so this is a lucky find. Unlike most antiques which are big and heavy, this is a small frame and compact revolver which still shoots a reliable round. Overall length is 7 inches. Mechanics are fair, with a working action in both single and double action. The hammer is strong and indexing is reliable. The rifling is still strongly defined down the 3" barrel, with evenly scattered patches of inactive oxidation from black powder use. The Galand patented mechanism involves a very unique lever which pulls the barrel and cylinder straight forward while ejecting spent shells. All components of this work fine. As a revolver that's a century and a half old, some wear and wiggle is evident in the lever and hinge mechanism, but it still works consistently and properly. Visually this revolver has an even gray/blue surface with some bits of lustre showing beyond the aged patina. No significant pitting is evident, though scattered dings and scratches are present. The grips are solid, with the left one showing an old crack that could be pretty easily stabilized and closed back up. No PAL, 18+ Ships Canada Check my ads for more antiques. I make no claims about the safety of shooting ANY antique! Check with a gunsmith.

categories:Sporting GoodsGuns

17441 impressions

1016 views

Antique status Swiss 1882 manufacturered by Waffen Bern. One of the most sought after antiques, this revolver is chambered in 7.5 Swiss ordnance which is still available from Fiocchi. This revolver is commonly used with .32 sw longs, although the cases may bulge. S&B .32 longs is not recommended as the case rims are smaller than normal and may cause light strikes, all other brands are functional. The revolver itself is in very good condition, lockup and timing are tight. The bore is shiny as most of these revolvers are. Bluing is in good shape. The gun comes with a custom western quick draw holster that is formed to the gun, with the standard right hand attachment point or the holster can be swapped to the left side for a reverse draw set up. Pick up available, shipping included with insurance on buyer. Good pistol for bushwhacking and ranch carry. The gun will also come with a copy of the frt and a hard case. Please inquire if you need more pictures. Cash or etrasfer only. No pal required, just proof of over 18 Please check with a gunsmith before firing any antique firearm for the first time

categories:Sporting GoodsGuns

6063 impressions

232 views

Extremely rare Smith & Wesson No 3 chambered in 455 Eley with target sites and a 1-9/16 inch cylinder Was a special order. This revolver still retains about 75% of the original bluing it comes with a 7 1/2 inch barrel checkered walnut grips showing where but good condition no chips or cracks. The trigger set is amazing. This revolver is one of twelve ordered and shipped to Birmingham England in 1905, this revolver frame was produced prior to 1888 as documented and is considered an Antique status in Canada. Smith & Wesson factory letter included. PAL not required

categories:Sporting GoodsGuns

87183 impressions

4747 views

Bliss & Goodyear Protector single-action revolver chambered in .32 Rimfire. This is a classic American pocket revolver with solid historical significance and strong collector appeal. ✔Shoots perfectly ✔ Confirmed antique status – No PAL required in Canada ✔ Tight lock-up with excellent timing ✔ Smooth half-cock and full-cock operation; trigger is clean and usable ✔ Original bluing remains intact ✔ Bore shows good rifling ✔ Mechanically tested and functioning ✔ Original markings present; period-correct configuration

categories:Sporting GoodsGuns

4736 impressions

429 views

Forehand & Wadsworth Terror Model in 32 Rimfire, 3" barrel, 6 shot capacity. F&W was known for their unique model names and "Terror" was no exception! The action functions well on this piece. Half and full cock work well. Timing and lockup are good. Bore and cylinder walls show wear common to a vintage 32rf. Exterior shows scattered surface rust that would clean up. Original grips show expected wear, right panel has 2 notches. Cylinder pin release works well. HAS BEEN TEST FIRED! Shoots well. 32 Rimfire is easy to reload for with minimal tools. Antique status in Canada, no PAL required to purchase or own. Will include an RCMP FRT printout showing antique status in Canada. $500 includes Free Shipping. If you have any questions or need more pictures or video please feel free to ask.

categories:Sporting GoodsGuns

4754 impressions

461 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

23510 impressions

673 views