Steel gas block, non-adjustable, .750" gas journal $20 * Luth Steel ar15 adjustable gas block .750" gas journal $50 Mid length gas tube $20 Rifle length gas tube $5 (silver) Rifle length gas tube $8 (melonite/black) Anderson Charging Handle $20 H carbine weight buffer $30 H2 carbine weight buffer $40 H3 carbine weight buffer $50 LBE 223/556 Bolt, firing pin, cam pin kit $125 Hammer/trigger pins $5 (for a set of 2) Magazine catch and spring $5 Bolt catch (includes spring, roll pin and detent) $5 Buffer detent $1 (no I do not have detent springs) Takdown/pivot pin spring $2 Trigger guard $2 Faxon 18.6" barrel w/ adj gas block and gas tube (installed but not used) $300 Crush washer for 1/2" diameter threaded muzzle devices $2 1/4x28 3/4" length bolt $2 Anti-walk pin kit $20 15" mlock handguard $120 Vism mid length triangular aluminum handguard $40 _____________________________ With the exception of the barrel, all parts will be shipped in a canada post pre paid box for $19. Unless noted, all parts are new. Pick up available in SE Edmonton; minimum value for pick up order is $20 *can be installed sideways to block the gas port for renegade builds

categories:GunsSporting Goods

9844 impressions

374 views

WW1 French M1886 bayonet for the Lebel rifle. This is the war time simplified version without the quillion (hook) and with the brass handle. This version with the brass handle is of a type produced during the First World War, from the 25th of October 1914 until July of 1917.   The left side of the blade has the initials SG stamped just in front of the guard to identify the Maker.  The "S.G." mark on a French bayonet from the World War I era stands for Sutterlin Lippmann & Cie., a manufacturer located in Saint Étienne. The base of the guard has a stylized letter P with the number 45979 stamped into it. The scabbard has this matching serial number. The base of the grip has the number 11 stamped into it. The release button works as designed.   Overall Length – with blade in scabbard  - 25 3/4” Length of Bayonet – 25 1/8” Length of Grip including the Guard – 4 5/8” Blade Length – 20 1/4”   $250.00   Thanks, Phil

categories:GunsSporting Goods

2489 impressions

81 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Sako 85 Finnlight II Rifle, 30-06 SPRG, in a Cerakote Tungsten treated stainless steel action with an elastomer grip/black composite stock. It’s got a 22.4” fluted barrel, adjustable trigger (2-4lbs), 5rd magazine, and adjustable cheekpiece. SAKO Model #SBW3114A1930B4 I am the first owner of this brand new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Building on the famous Finnlight name, the Sako 85 Finnlight II is an icon reborn. The lightweight RTM fiberglass stock makes the rifle light to carry and the barrel has been treated with a weather resistant Cerakote® coating, which makes this rifle the perfect choice for all conditions. The fully adjustable cheek piece also makes the rifle perfectly customizable for your preferences. SPECIAL FEATURES * HIGH QUALITY RTM FIBERGLASS STOCK 
The composite stock is manufactured with aerospace grade RTM technology. All Finnlight II stocks have carbon fiber bedding to ensure maximum accuracy and stability in all temperatures.
 * BARRELED ACTION 
Cerakote® treated stainless steel action for maximum weather resistance.
 * SECURE GRIP 
The grip surfaces and the cheek piece are made from robust elastomer.
 * ADJUSTABLE CHEEK PIECE 
Maximum precision and unique comfort for each shot. STANDARD FEATURES * ACTION 
Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing.
 * BARREL 
Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish.
 * MAGAZINE 
The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release.
 * SAFETY 
The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged.
 * SIGHTS 
Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage.
 * STOCK 
The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation.
 * TRIGGER 
The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. SPECIFICATIONS MPN - SBW3114A1930B4 Caliber - 30-06 Sprg Receiver Size - M Handedness - Right Weight - 2.8 kg / 6.17 lbs Total Length - 1090 mm / 42.9 in Barrel Length - 570 mm / 22.4 in Rate of Twist - 1:11" Magazine - Detachable Magazine Capacity - 5 + 1 Trigger - Single Stage Trigger Stock Material - Composite Stock Finish - Black Material - Cerakote Tungsten Muzzle Thread - No Cheek Piece - Adjustable Open Sights - No

categories:GunsSporting Goods

32240 impressions

943 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

16223 impressions

478 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

15499 impressions

868 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

17234 impressions

833 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

16252 impressions

486 views

Cal. 30-06. Serial# 4798918. Bbl.24". Marked behind front sight "SC" with a flaming bomb and "10-43." Aperture rear sight graduated to 800 yards. Blade front sight. Swept bolt marked on top of handle "B2" and marking underneath appears as "F." Safety lug is Remington style, as is the bolt shroud. All stamped furniture, including large bow triggerguard and fine checkered trap buttplate. Walnut stock set with two recoil bolts. The grip is marked underneath with encircled "P" proof. Assembly marks are visible ahead of the trigger guard. CONDITION: stock set has a and bruises in its appearance commensurate with extensive service. There are numerous handling marks. The metal retains its original finish with some thinning and wear. Very good, shiny 4-groove bore. also comes with a leather combat sling. Can ship anywhere in Canada, Please see my other ads for rare firearms, accessories, and ammunition.

categories:GunsSporting Goods

23837 impressions

532 views

Brand new. VOA hand guard for Remington 870 pump action. Milk slots for various attachments for lights etc. Bought for a project that never happened.

categories:GunsSporting Goods

16698 impressions

956 views

If you are looking for a reliable, sturdy, and protective holster for your collectible handguns, I can help. Don't go out into the bush or backcountry without a way to protect and safeguard your valuables! I have hand-made and custom fit holsters that work the following models, and more. Webley Mk 1-6, Webley WG, Smith & Wesson no. 3 variants, French MAS 1873 and 1874 models, Reichsrevolvers, Colt 1877 Thunderer, Colt 1878, Small and large frame Nagant types, Bodeo, Remington and Colt Cap & Ball Revolvers. Inquire with your model information and I'll do my best to match you with something that fits to your liking or money back after return. Prices range from $75-$150 I also have scarce period accurate Japanese Service Type 26 Shaped Top "Ham holsters" with removable shoulder strap and 12 round ammo pouch Designed for Japanese Type 26 revolver in 9mm/.38 cal And German Service Reichsrevolver M/1883 Holsters with 12 round ammo pouch designed for Reichsrevolver Model 1883 10.55 mm/.44 Russian Ships Canada wide. I don't like drama, and offer a money back guarantee of satisfaction.

categories:GunsSporting Goods

15990 impressions

618 views

For sale is my a mechanically great, all matching, 1880 production short barrel "Shopkeeper" Colt Thunderer in .41 LC. Selling because cash is tight. As an Antique, this handgun is exempt from Canadian licensing and registration requirements, and can be used anywhere a nonrestricted firearm would be legal. Black powder or light load smokeless .41 Long Colt rounds can be purchased online or worked into deal. The 1877 line of revolvers was Colt's first double action model ever produced. They made almost 170,000 from 1877 to 1909 with three main designations: the Colt "Lightning" in .38 LC, the "Thunderer" in .41 LC, and the "Rainmaker" in .32. However, due to Canada's laws, only the .41 caliber ones are designated as "antique". This is luckily one of those guns, and it needs no registration or licensing to own. These models are highly collectible handguns, particularly the short barrelled "Shopkeeper" model due to its easy to stow nature. Arizona Wild West gunslinger Doc Holiday carried one of these. This particular example, SN 22261, was produced rather early in 1880 and has a short but accurate 3.5" barrel. All parts match, and the exterior retains an excellent 85% of the original nickel. The internal mechanics are incredibly clean and original. The bore is fair with strong defined rifling. Grips are nice like-new repros with rampaging Colt medallions. All hammer clicks are present, lockup is rock solid, and the trigger pull is pleasant in both SA and DA. The barrel is stamped with the Hartford Connecticut Colt address and the acid etched "COLT D.A. 41" is still visible. The left side of the frame displays the 3 line 1871, 1874, and 1875 patents. It reads "41 CAL" on the trigger guard. Can work ammo into deal with PAL No PAL required for revolver Must be 18 Comes with FRT page Ships within Canada Check out my profile for more antique handguns! I make no claims about the safety of firing ANY Antique firearm. Consult with a gunsmith first.

categories:GunsSporting Goods

19984 impressions

1373 views

This is an Antique Harpers Ferry U.S. Model 1842 Smoothbore Percussion Musket. The overall length is 57-3/4” with a 42” long barrel and coming in at just under 10 pounds. This is a .69 caliber musket. These were designed in 1842 and were produced from 1844 to 1855, with this one being made in 1849. There is a partially visible eagle over US forward of the hammer. Rear of the hammer is the markings HARPERS FERRY 1849. Inspection marks can be found on the barrel near the breech and on the trigger guard. Overall condition is very good with a low amount of handling dings and a small crack in the wood by the butt plate. Mechanically in excellent condition with a strong action. The Model 1842 was the first U.S. musket to be produced with a percussion lock. It had an effective range of 100-300 yards and a maximum range of 400 yards. The 1842 was the last U.S. regulation .69 caliber musket. Many of these muskets later had the bores rifled and saw service in the American Civil War. This would make a great addition to any antique collection of would even be suited as a stand alone piece. This is an antique so no PAL is required for purchase. Buyer must be 18 or older and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected by a competent gunsmith prior to any form of use.

categories:GunsSporting Goods

19921 impressions

1135 views

Custom M-lok Handguard/Forend Strap for your Shotgun! (Brand New) Works with ALL M-lok Handguards! (Shown on a Strike Industries ‘VOA’) Design: Perfect Lie Attach: Leather Footings with supplied Magpul M-lok T-nut/Screw kit! (Leather will not damage the finish on your Handguard) Material: Quality 550 Nylon Paracord (Strong, Durable, Mold/Mildew resistant, Fade resistant and Washable (Hand Wash) Can be made in Many other colours if you’d like something different (Custom Order, No Extra Fee) Masterfully Handmade in Canada by a Canadian for Canadians, And anyone else that’s interested! West Edmonton Will Ship (Extra) Contact: Slade @ Ph: 780-504-7937

categories:GunsSporting Goods

6051 impressions

470 views

New in box. Beutiful gun! The .270 Winchester cartridge is used for hunting deer, elk, sheep, goats, and other big game in North America. It's a versatile cartridge that's suitable for open country and mountain hunting. 270 Win Weatherby Vanguard Badlands Mag 5+1 24" Badlands Approach Camo Monte Carlo Stock Burnt Bronze Cerakote Right Hand

categories:GunsSporting Goods

13270 impressions

760 views

New in box. Beautiful rifle! The .270 Winchester cartridge is a good choice for hunting deer, sheep, goats, elk, and other big game in North America. It's a versatile, powerful cartridge that's suitable for open country and mountain hunting Weatherby Vanguard Sporter S2 270 Win 5+1 24" Satin Turkish Walnut Monte Carlo Stock Matte Blued Right Hand

categories:GunsSporting Goods

13649 impressions

636 views

Have a Orginal run classic famae sg-542 semi auto .308 with wire folding stock and inter-grated bi-pod in the hand guard comes with two 5/20 mags , scope and rings are not included rifle only $4000

categories:GunsSporting Goods

28913 impressions

2839 views

Brand new The Magpul X-22 Backpacker stock takes the function of our full-size Hunter X-22 Takedown, and pares it down for ease of storage and transportation. Made for the Ruger 10/22 Takedown rifle, the X-22 Backpacker offers a minimalist solution for the hunter or outdoorsman who wants to transport their rifle in an efficient, convenient package without compromising shooting performance. Constructed of a durable advanced polymer, the X-22 Backpacker features an ergonomic hand guard, optional QD sling mounting capability, integrated storage compartment in the grip, a hinged storage compartment in the stock capable of storing up to 3 spare 10rd magazines, a MOE SL non-slip rubber butt pad, and a unique locking interface to attach the barrel assembly to the receiver when being transported. Fits all Ruger 10/22 Takedown rifles as well as the Tactical Solutions SBX barrel. Drop-in design compatible with all factory Ruger 10/22 Takedown Unique locking interface to attach the barrel assembly to the stock body when being transported Reinforced polymer construction for strength and durability Ergonomic hand guard Comes with interchangeable standard and ‚ optic height‚ cheek risers Optional QD sling mounting capability Integrated storage compartment in the grip Hinged storage compartment in the stock capable of storing up to 3 spare 10rd magazines MOE SL nonslip rubber butt pad Made in USA

categories:GunsSporting Goods

15551 impressions

1180 views

Brand new The RVG is a basic, light weight, cost effective vertical fore grip designed to be compatible with all 1913 Picatinny rails. Constructed from reinforced polymer with aggressive texturing for positive grip and manipulation, it is as durable as it is functional. It is ergonomically designed for use as a traditional vertical grip, but has also been optimized for use with the "Thumb Break Method" of shooting as taught by Magpul Dynamics. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. Made in USA

categories:Guns

3590 impressions

480 views

Lightly used, in decent shape. Tikka T3 short action, AICS mags. Comes with hand guard arca adapter.

categories:GunsSporting Goods

4589 impressions

529 views

- 3 Gauge Gun w/Shotgun Gauge Reducers (x2) 12g-20g and 12g-410g $260 and (I will pay 50% of shipping costs aprox $25) - 12g Model CIL 401, Used Cond, One Repair, Solid Old Gun, 2 3/4 Inch Shells, - 30 Inch Barrels, 46 Inch Total Length, - Barrel are Nice and Shiny Inside - Plastic Push Button Trigger Guard Tang - CBC Metal Butt Plate - Very Solid Shotgun, Opens,Closes Very Easily - Made in Brazil.. Has Strong Shell Ejector - Text Only.. 780 915 3274 No Emails.. - Check Out My Other Adds - PAL/FAC a Must. - SGR's simply drop into the chamber as a 12g shell would then the 20g or 410g into the SGR.. So Handy!! Go shoot with the kids and or the ladies... and you just need the one Gun... less to store, maintain and pack.. Great option for a Cheap Under the Seat, Quad Box or stored in the Boat for a Bear Banger, Grouse Getter, or the Rabbit Hopper Stopper for Stew.. or just blasting thru cheap or Free Old Ammo..

categories:GunsSporting Goods

51637 impressions

4974 views

Brand new The M-LOK Extended Cantilever Scout Mount provides forward light positioning to minimize shadowing effects The extended cantilever design is low profile and optimized for Magpul MOE SL, Zhukov and MOE M-LOK Shotgun forends as well as compatible aluminum M-LOK handguards It fits Surefire, Scout Light and Streamlight and ProTac rail lights It directly mounts to M-LOK compatible systems and includes cammed t-nuts, recoil/impact mitigation lugs and has backwards MOE compatibility with optional adapters *Note: NOT compatible with SureFire DS00 Dual Activation Switch or M600DF Scout Light The Scout Mount will not properly fit Bushmaster ACR Hand Guards *The MOE Scout Mount is optimized for rifles with a factory A2 front sight base Rifles with a railed gas block and folding front sight may have clearance issues depending on the size/shape of the gas block, sight, and installed light Made in USA

categories:GunsSporting Goods

3291 impressions

385 views