Brand New - Unfired Non-Restricted $499.99 FIRM - Private Sale - NO GST New = Transferrable Lifetime Warranty! Serengeti S-Tactical 12ga 5.8lbs, 11.8" Barrel 26" Overall Black Walnut Stock Rated for Steel Shot Choke tube kit (C, M, F; two in barrels) Shorty. Very similar to Sulun SS-211 Sub 26" Overall Length - Unrestricted **Not Interested in Trades** Valid P.A.L., D.O.Birth, Email registered with Firearms Program Required to verify yr PAL for Transfer Cash Preferred - Etransfer Accepted Local Pick up Only - in Sherwood Park Shipping can be arranged at your expense Camp Defense Bear Defense Tactical Shotgun SS-211 12ga shotgun

categories:GunsSporting Goods

63620 impressions

4715 views

Many survivialists, competition shooters and outdoorsmen fear it... a dead battery in their reflex sight. While some have opted to make compromises and surrender the speed of a reflex sight for the comfort of something less effective, Vector Optics is poised to change all of that will the introduction of the various Solar Augmented sights. They still require a battery but will draw power from ambient light to prolong that battery life. All versions sold by Specter Arms are multi reticle, with minimal weight or bulk while preserving the main reason to get a reflex sight; speed. All of these units can be mounted on a picatinny rail. _____________________ Vector Optics Scrapper (SM45) $80 (sale) This is a closed, tube style optic. It comes with 2 different mount heights, one for modern sporting rifle where the comb of the stock and the mounting plane are on the same level or a low profile mount for traditionally stocked firearms such as lever actions. Caliber Range (max): 20ga, 762x39mm. Ideal For: Shotguns, SKS, FX9, Scorpion, Raven, Templar, wk180, ws-mcr, tavor, APC, Bren _____________________ Vector Optics Frenzy-X $250 This is an open micro reflex sight that is easily mountable to a pistol or a traditionally stocked firearm where the comb is lower than the mounting plane. It can be used with a modern sporting rifle with the addition of a riser. This is strongly recommended as a sight for 45-70 lever actions. Caliber Range (max): 12ga, 45-70. Ideal For: Shotguns, PC9, SKS, lever actions, pistols(RMR or picatinny), M10x, Type 81 _____________________ Specter Arms is a dealer for Vector Optics and there is more on the website. Send a text message to 7809079585 for more information. Shipping available at actual cost or pick up in SE Edmonton. Please click on my user name for other ads or information on shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

100243 impressions

2004 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11651 impressions

520 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:GunsSporting Goods

47315 impressions

1222 views

I have a beautiful little Henry 410 lever action for sale. It doesn’t get much use as I favour my Marlin 410. I’m actually torn between selling one of the two. It’s the model with the 20 inch smooth barrel and tube fed. I’ll give it to 8 to 9 out of 10 as far as condition goes. Little bit of patina on the lever and bottom of receiver. Doesn’t affect shooting whatsoever. Nothing a little fine grit sandpaper wouldn’t fix. This was my ex-girlfriend‘s first Shotgun, I had to confiscate it because she wasn’t taking good care of it lol. Cash is King, no trades whatsoever. Price to sell. You won’t find another 410 like this for this price. Must have a valid Pal No COD Can arrange to meet at a halfway point around the Edmonton areas for additional fee ($20 bucks) for gas n my time. Can and will ship on buyers dime plus added expense to purchase Gun lock. Text or phone call is the way to go to contact me. As I never checked my emails. I’ll have pictures for this, this weekend

categories:GunsSporting Goods

5999 impressions

539 views

For sale is one Benelli M2 Semi Auto Tactical 12 gauge shotgun. Original owner, purchased in 2013. Have shot no more that 100 rounds through it. Comes with Mesa Tactical sureshell side carrier / picatinny rail and Mesa Tactical charge handle, accessory tube handle, owners manual and original choke tubes. Asking $1500 OBO. No trades please.

categories:GunsSporting Goods

22105 impressions

1602 views

Hello everyone. I have for sale a Savage 10 Law Enforcement Edition in .308 that has been my go-to hunting rifle for the last 3 years. It has a cheek riser, directional muzzle break, 24 in heavy fluted barrel, 20 MOA rail, long range scope with heavy duty hand lapped rings, 2 proprietary Savage magazines,an extra rubber butt pad to reduce recoil even more, 3 position safety and tactical bolt knob. The stock is with the bedded aluminum chassis for rigidity and precision. The AccuTrigger is adjusted at 2 lb. This is a very very accurate rifle. Here are some bullets tested with a 3 shot group at 100 yards: Sako powerhead blade 162 gr - 0.4 in Herters soft point 150 gr -0.45 in Federal berger hybrid hunter 168 gr - 0.48 in Sellier & Bellot soft point 180 gr - 0.48 in Norma soft point 150 gr - 0.74 in Sako superhammerhead 180 gr - 0.8 in Did load development for it with Barnes TTSX 130 gr and obtained 0.35 in at 100 yards . The scope is a SKW Optics 5x30x56 FFP in 0.5 MIL/click. The scope is high quality and tracks well. It s a 34 mm tube with lots of internal adjustment. It comes with everything already done and researched. You don t have to do anything.The rifle was $900 ,scope was $700 muzzle break $100 ,butt stock pad $40, scope rings $100,scope rings handlapping $50, extra magazine $100,trigger adjustment $50. The rifle is ready to shoot. Doesn't need anything. About 300 rounds through it. Currently sighted at 300 yards. Sold as a package since the scope rings are hand lapped for this rifle. No lowballers. Gun case not sold with the rifle. Willing to ship at owner's expense about $70. Thanks 

categories:GunsSporting Goods

33011 impressions

1393 views

Remington tactical shotguns are rugged, ultra-dependable and continually evolve as they’re called to serve in new, increasingly demanding environments. Built on our legendary pump action that’s become the gold standard for high-risk applications, the Model 870™ Express Tactical with a quick pointing 18 1/2" barrel and includes our extended ported Tactical Rem Choke. It packs a full 7 rounds of 2 3/4" or 3" 12-gauge firepower with the factory installed 2-shot extension. The Model 870™ Express® Tactical with XS® Ghost Ring Sights is optimized for rapid target acquisition and precise shot placement with the XS blade sight and XS Ghost Ring sight rail (fully adjustable for windage and elevation), which accepts optics and sight systems as well. Both models have black synthetic stocks and fore-ends with sling swivel studs. Receivers are drilled and tapped. Receiver milled from a solid billet of steel for maximum strength and reliability Silk-smooth twin action bars prevent inding and twisting for maximum strength and reliability 18 1/2" tactical barrel with XS® front blade sight RC Tactical (ext/ported tube) XS Ghost Ring sight Rail (mounts to receiver) Sight is fully adjustable for windage and elevation Front blade sight works in conjunction with Ghost Ring to quickly and accurately acquire target Tactical style fore-end 2-shot magazine extension Receiver drilled and tapped for scope mounts (XS Picatinney rail with ghost ring included)

categories:GunsSporting Goods

2955 impressions

249 views

11-87 12 gauge camo 3 inch. Please read the full ad before contacting me. This is a bit of a project gun. I bought it new in 2008 and shot it casually over the years with almost nothing but lead trap loads. Recently it developed a problem cycling the action after the shot. It will always fire. However, sometimes it will cycle the action, other times the action cycles half way and stops, and still other times it will not cycle at all. Sometimes it picks up a new shell and sometimes it won't. Sometimes is locks up and can only be freed by popping the barrel and the action bars out and re assembling it. I don't have the time or interest to look into it . It might be a simple fix who knows. I already bought a gun to replace it. This isI a package deal only. This includes the gun as it came from the factory, with 1 modified choke tube, a wrench, 27(?) Inch barrel. It will also come with a Remington 20 inch fully rifled 12 gauge barrel that has open sights. This barrel has 11 slugs through it and was used on 1 trip to shoot a moose. I will ship this gun on the buyers dime but I would much prefer a local sale so that the buyer can actually see the problems themselves. Text Jeff at 403 390 2570 for the fastest response. Located in Airdrie

categories:GunsSporting Goods

5110 impressions

682 views