CZ Branded Pistol Cleaning Kit. Compact (15 x 9 x 3.5 cm) semi-rigid case with MOLLE on the back Threaded cable Cable attachment - wiper Plastic brush Oiler with Interflon oil Brass brush Set of textile squares $15 per, multiple available.

categories:Sporting GoodsGuns

30877 impressions

846 views

Tipton Deluxe Bore Guide Kit. Used only a few times, includes all pieces. Pickup available in Seven Persons, Bow Island or Medicine Hat.

categories:Sporting GoodsGuns

15131 impressions

780 views

Looking for calibre conversion kit for a SIG Sauer P320 preferably SIG .357 but would also consider .40 S&W or 10mm. Any leads would be appreciated. Thank you

categories:Sporting GoodsGuns

1857 impressions

110 views

This is a NEW in package kit to raise your cheek so you have better sight through scope. This kit does not have shell holders attached. Buyer pays postage. Text please.

categories:Guns

19553 impressions

607 views

You must have an exemption letter and be qualified to buy this pistol license wise . Alien Pistol Semi Automatic 9mm. Gas operated Pistol not standard blowback. Regarded as a pistol advanced beyond other pistols the Alien has many features not available on standard handguns. Included is the full kit plus 4 magazines for a total of 7 magazines and a spare gas pistol system and parts kit. These kits sell to the USA for $5000 without extra mags or parts. Pistol has lowest bore axis of any pistol. That means the Bore is lower than the hand holding the pistol leading to minimal muzzle flip. The pistol features an standard pistol sight rail "irons" and a Sight rail with A Red dot designed for the Alien. The toolless exchange design requires the shooter only to press out a pin to exchange slides. The process takes less than 15 seconds. This pistol has been fired for a total of 500 rounds. By far the most accurate pistol I have ever fired in over 40 years. From the Laugo Arms website The Laugo Arms Alien Full Kit is the ultimate package for enthusiasts and competitive shooters. Iron Sight Top Rail and Optic Top Rail equipped with a Laugo Arms red dot sight are both included for maximum versatility. A magwell and Elornis Industries holster system complete the setup for optimal performance at the range. FULL KIT INCLUDES: Laugo Arms Alien pistol FINISH: Duotone Black / Green Three (3) 17 Round Magazines (10rnd Limited Capacity Magazines also available) Standard Fiber Optic Iron Sight Top Rail Optic Top Rail with Laugo Red Dot Sight Aluminum Magwell Elornis Holster and Adjustable Mounting System Cleaning Supplies Tool kit Dry-Fire Training Chamber Insert Custom Hard Case – Large Willing to take Gold and Silver Bullion on Trade. I don't have an exemption letter so I cannot accept trades of pistols. I am looking for a Winchester Deluxe 1892 takedown model with a 16" barrel in .357 magnum but that's all for firearms trades. If you have any questions about the pistol please ask as long as you have the exemption status.

categories:Sporting GoodsGuns

25793 impressions

2788 views

Swiss products k31 threading kit in excellent used condition

categories:Sporting GoodsGuns

29456 impressions

2864 views

This Gun Boss cleaning kit is brand new in its package, never opened.

categories:Sporting GoodsGuns

10234 impressions

961 views

Gun cleaning kit and sighting in kit. Asking $85.00.

categories:Sporting GoodsGuns

2779 impressions

428 views

Misc items for sale. 4. 1 legacy sports drop box mag kit that fits Remington 700 or howa 1500, need to check fitment. 300 win mag, 338 win mag and 7mm rem mag. 80 obo Please text or call. Having issues with texting so call and leave a message if no answer. Pick up only, no shipping. Low ball offers will be ignored.

categories:Sporting GoodsGuns

20763 impressions

1363 views

Bergara B-14 HMR in 6.5 Creedmoor Left Handed Vortex Diamondback Tactical FFP 6-24X50MM MRAD scope with medium rings and a picatinny mount Blue Force Gear, Vickers 221 Padded Sling, 2.00" Standard Push Button, Coyote Brown Expandable swivel bipod, can't remember the brand but just a basic one that holds up. Pelican 1750 case Bore snake, complete Tipton cleaning kit and materials with rod all included. Was able to hit sub .25 MRAD at 400 yards (10 cm) cold bore. Meticulously cared for, 580 rounds through the barrel and gun. Only reason I'm selling is a lack of time for the hobby at the moment. Price is non negotiable, I don't particularly want to sell it.

categories:Sporting GoodsGuns

27900 impressions

1778 views

I am selling a HME backpack kit for $30 obo.

categories:Sporting GoodsGuns

1956 impressions

367 views

I am selling a Pursuit Boresighting kit. Got it for Christmas and had already bought a different one, so I dont need it. $60 obo.

categories:Sporting GoodsGuns

1630 impressions

417 views

New Tipton compact hand gun cleaning kit. Fits .22 to .45’caliber Hand guns. Shipping at purchasers expense.

categories:Sporting GoodsGuns

10346 impressions

818 views

Everything shown is for sale. Kit includes one set of 30:06 dies for $ 450.00 but many other die sets available at extra charge. Prefer a drive to me buyer due to cost / weight of shipping. Please use cell phone text messaging." 403 556 0086 Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:Sporting GoodsGuns

4408 impressions

145 views

Brand new Factory Mossberg 14″ barrel conversion kits for the Mossberg 500/590/590A1 series of shotguns. This kit gives you everything to make your Mossberg shotgun into a short barreled shotgun. All the parts have a parkerized finish. Included 14″ Barrel Tube Nut Magazine Cap Magtube Magazine Spring Retainer Magazine Spring Forearm Action Slide Assembly

categories:Sporting GoodsGuns

8376 impressions

809 views

Brand new This kit essentially provides a conversion to 590S functionality, but in a more robust design. It contains patent-pending Universal Cartridge Adapter and low-drag no-snag Magazine Follower which allows smooth cycling of 1-3/4" Minishells up to 3" Magnum cartridges in the same magazine. This kit is compatible with any Mossberg 12-Gauge pump-action firearm with a 3" Chamber and machined grooves in the receiver.

categories:Sporting GoodsGuns

5361 impressions

641 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

16418 impressions

1398 views

This is NEW! It was taken out of original packaging at time of purchase and afterwards put away. *Create your own holster, fits up to 5 inch barrels *This package contains pre-cut leather parts, hardware, waxed thread, needles, patterns and instructions (what you see is what you get) *Made in the United States Everything that originally shipped with the kit is included / NEW Cash Only. No Shipping. No Trades.

categories:Sporting GoodsGuns

5341 impressions

576 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:Sporting GoodsGuns

10620 impressions

1122 views

Cleaning kit for .223/5.56 and .35 cal rifles. Never used. Local pickup only. $25

categories:Sporting GoodsGuns

5585 impressions

271 views

Payment by cash at pickup. No other means accepted! Please, no telemarketing!!

categories:Sporting GoodsGuns

10171 impressions

454 views