WW2 Canadian/British Marked and war Dated slings $110. Let me know which year you are looking for- 1940, 1941,1942 some in unissued condition, 1943,1944 & 1945 very good original condition. Brass and black steel clasps available. Canadian with C Board Arrow marked are $85 Unmarked slings are $35 White parade slings $65 MECo 1963 dated excellent condition $35each Can Ship anywhere. Please see my other adds for collectable accessories and firearms.

categories:GunsSporting Goods

11742 impressions

296 views

Here is a unique combination for somebody that would like to display their commemorative rifle. The rifle itself (has been sold *not included) I had it paired up with the oak presentation case with red velvet lining for the Texas commemorative with Western Bowie matching knife with leather sheath. Anyone looking for an amazing presentation this is your package. Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

7291 impressions

551 views

Left handed Savage, comes with Calibre Specific Cabelas scope installed. Most accurate gun I’ve owned, I’m just getting old and have a lot of pain in my elbows and looking to get an ultra light gun which I’m hoping will be easier on me. Shoots best with the Remington Core-Lokt 130 grain ammo, but I haven’t tried a higher grain with it. Located in Lacombe, AB. I could possibly meet you in Red Deer, Calgary or Edmonton at some point if need be.

categories:GunsSporting Goods

1622 impressions

322 views

Have a bunch of paintball markers from my collection. Sold as is as they been wall hangers for years so I would recommend a rebuild before use. Most are complete some need small parts. Been adding new parts to most of them over the years lots of nice and expensive parts on them. Looking to trade for shotguns/ rifles as I’m not too much into paintball anymore. I do have a valid pal as well

categories:GunsSporting Goods

6998 impressions

403 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

6751 impressions

252 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11653 impressions

520 views

Bought these from my rifle, but they’re not performing the greatest. They’re a little hot for what my rifle is looking to sell or trade for some federal fusion or federal blue box in 280 rem or some nosler partitions. Trade preferred rather than selling

categories:GunsSporting Goods

7364 impressions

381 views

Regular price: $140 Going out of business sale $100 4 or more units $80 The creativity named HG Handguards offer a universal solution for those looking for a replacement handguard for their WK180s, WK181, Raven builder kits, Crypto or AR15s. They are compatible with both piston systems and gas tubes. The handguards are Mlock compatible to allow for customization while keeping the weight down. The HG handguards work well with the Specter Arms S8 linear compensator and the assortment of after market barrels that we offer. (Please see the S8/S9 ad pictures for some examples). The handguards are free floated for accuracy and clamp on to the receiver using a sturdy steel barrel nut. Be careful of cheap imitations that use an aluminum nut. Lengths of 11" and 12" available. Only available in black. Shipping available at actual cost or pick up in SE Edmonton. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

37744 impressions

1981 views

If you have one you're interested in selling, text or email me some pictures and information

categories:GunsSporting Goods

7552 impressions

500 views

Looking to sell my Winchester XPR in .270 Winchester Short Mag (WSM). Comes with the the Leupold VX-Freedom 3-9x40 optic and rings and 2 magazines. Can also include some brass, hand loaded ammo and reloading dies if interested as I'll have no use for them. The gun runs great and shoots fantastic and is in good condition. I've mostly had it to the range but took it out hunting for 1 day a few years ago and cleaned up all my tags that day with it. It's spent the rest of its time in my gun case. Selling as I've got other rifles that do the same job and have no real use for it anymore. Asking $1000 for it. Valid PAL and matching drivers license required. Cash or E-transfer ONLY. Willing to deliver between Taber and Coalhurst.

categories:GunsSporting Goods

2082 impressions

177 views

Looking to sell my Weatherby Vanguard in .243 Winchester. Comes with the Bushnell Engage 3-9x40 optic. Can also throw in 3 boxes of brass, 18 rounds of loaded ammo and a set of reloading dies as I'll have no use for them. The gun runs great and shoots fantastic out to 400 yards. Only had it out to the range once or twice to run a few boxes of ammo through it. Just don't have a use case for now with some of the other rifle I have in my collection. Asking $1000 for it. Valid PAL and matching drivers license required. Cash or E-transfer ONLY. Willing to deliver between Taber and Coalhurst.

categories:GunsSporting Goods

1831 impressions

131 views

Selling my custom Remington 700 chambered in 6mm BR. Built for precision shooting with top-tier components and craftsmanship. Rifle has approximately 600 rounds fired and is in excellent condition. Build Specs: •Action: Remington 700 •Gunsmith: Craige Douglas •Barrel: Gaillard, 1:8 twist, chambered in 6mm BR with .271 neck •Stock: McMillan A5 •Optics: Nightforce NXS 8-32x56 with NPR-1 reticle •Bolt: Bushed firing pin, oversized bolt knob •Accessories: Butler Creek flip-up scope caps •There’s an aftermarket trigger in it, I think it’s timny Extras Available: •200 two and 3 times fired Lapua Brass •Berger 105gr Hybrid bullets •Pelican Vault V770 hard case Price: $4,000 (Extras negotiable if interested) This is a professionally built, competition-ready precision rifle. Perfect for someone looking for a proven 6BR setup with premium glass. I’m in Medicine Hat for a face to face.

categories:GunsSporting Goods

10304 impressions

414 views

Canadian Ross rifle. Some of the top wood still there. Good condition. Cycles well and shoots good has a nice adjustable sight. I also have a bunch of shells I would be looking to sell with the gun. If bought as a package deal then the shells would be $250 for all. Local pick up in Calgary. Shipping at buyers expense

categories:GunsSporting Goods

1401 impressions

284 views

Looking to buy a youth shotgun for my son as he learns to shoot. Short length of pull. Only interested in something in Alberta for an in person purchase. Maybe now is the time to sell the firearm your child outgrew!

categories:GunsSporting Goods

1803 impressions

90 views

As title says, I'm just seeing if anyone still has some zombie max ammo kicking around that they'd be willing to sell. Text 780 778 0037. Thank you

categories:GunsSporting Goods

32584 impressions

782 views

I have a lot of brass, powders, primers, and bullets I'm looking to sell. Brass is 9mm, 40sw, 357mag, 38 special, 45acp, 223, 308, with small batches of 6.5creedmoor, 338 lapua, 30-30, & 44 spl. The bullets, powders, and primers aren't all full so if you see something you like ill check for the amount and discuss price with you. Texting is best sometimes i forget to check messages on here

categories:GunsSporting Goods

3590 impressions

254 views

Hey, all! I am in search of a Remington 700, preferably chambered in: 7mm08, 6.5x55 or .30-06. Really anything less powerful than a .300 wm or 7mm mag. I would also prefer it to be pre-bankruptcy, (around 2006), and it needs to have a bottom metal, which the adl model lacks. If anyone has what im looking for, or very similar, like in .243 or something, we might be able to work something out. Please message me on either this website or my phone, 587 926 7510 . I am in Edmonton/devon area and am likely willing to make the drive. Also prefer to pay less than $1100. Thanks!

categories:GunsSporting Goods

5606 impressions

257 views

Looking to buy some 7.62x51 ammo. Not interested in Chinese surplus or Spanish surplus. Let me know if you have some for sale. Local deal only.

categories:GunsSporting Goods

15188 impressions

412 views

Beautiful looking rifle, never fired. Rossi R92 357 Magnum Sniper Gray Cerakote Lever Action Rifle - 16.5in. PAL Required, prefer local sale. The Rossi R92 is a well-known and reliable lever action rifle that is also affordable. The R92 Triple Black model builds on this reputation by adding some modern touches to the classic design. It is chambered in .357 Magnum and can also fire .38 Special, making it a versatile option. The wooden stock and forend are coated in a durable all-weather black-on-black splatter paint finish to protect them from the elements, while the rest of the firearm features a sniper gray Cerakote finish that adds to its toughness and durability. The Triple Black model also features a threaded barrel and Picatinny scope base, which are exciting additions. The threaded barrel allows for the attachment of a suppressor or muzzle brake, while the Picatinny rail provides the option of adding a scope or red dot sight. This makes the R92 Triple Black a great choice for anyone looking for a tactical cowboy rifle that combines the best of both old and new.

categories:GunsSporting Goods

2260 impressions

268 views

I’m definitely on the fence about this one, I have a Left Handed Browning medallion Xbolt in 30-06. I bought it used. I haven’t sighted it in a shot a few rounds through it but that’s about it. As for the condition, it’s definitely seen some use, it’s the way I got it when I bought it. I’ll probably give it a 7/10. The only reason why I’m considering selling is I have another rifle project, im looking to fund. The downside of selling this is I also have a shit ton of ammo for it so I’m still on the fence not to mention, Good luck trying to find a left-handed rifle these days. If you found one in a store, you found the holy Grail of rifles. If you find one online used well, everyone thinks their guns are worth $3000 for some reason.I’ve searched everywhere and I can’t find anything anywhere. Prefer local pick up but not a dealbreaker. Valid pal No trades unless it’s another lh browning lol Will ship and add a gun lock on buyer’s dime No COD The ultimate way to contact me is by text or a phone call. I rarely check my emails. I work on a first come first serve basis, so if you send me an email, but someone sends me a text after obviously I’m gonna see the text first. Cash is king,

categories:GunsSporting Goods

6504 impressions

508 views

Probably a long shot but looking to find a rear sight aperture and nut for my sons savage rascal that fell off in the bush somewhere

categories:GunsSporting Goods

1488 impressions

112 views