Hogue stock off an rem 700 sps-acc .308 short action w/bull barrel Unmolested and still sticky

categories:Sporting GoodsGuns

9777 impressions

540 views

Prettying much any 33 WCF reloading items would be great Thanks for looking

categories:Sporting GoodsGuns

3578 impressions

419 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - $150 Bolt Carrier, Chinese type 56 - $45 (1 available) Long Recoil spring, complete - $50 (1 available) Dust cover, Chinese type 56, no markings or serial number on top - $40 (1 available) Rear sight leaf spring (spring only) - $12 (2 available) Short spring - $15 (1 available) Short piston - $28 (1 available) Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (1 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Tapco ODG Synthetic stock with 6 position stock (not ATI) black moulded plastic hand guard (gas tube not included) - $250 Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $22 per tracked package / If it's small enough to go letterpost then inquire about that option. Payment by EMT (shipped) or cash (F2F pickup)

categories:Sporting GoodsGuns

46596 impressions

1609 views

Wanted Old Shotgun Reloading Tools/Books And ! Lee Loader Field Kit in 12 g - 20 g - .410 g . Rool Crimp 12 g . Lee Smooth Slug mold & Lee Buckshot mold . Part bag of lead Shot # 6 Powder Goex FFg or Pyrodex RS . Lyman 4th or 5th edition shotgun manual or Similar & Black Powder Shotgun Reloading manual . New Old Stock WW-Winchester 12 Red/white wads & Federal Wads . Gently Used tools - msg me with what you have will discuss price . Old guy wanting to give it a go . Locally in my area will travel up to 1&1/2 hrs or meet in City - Only Text or Call evenings ! as im not on internet ! @ 780-908-8424 thanks .

categories:Sporting GoodsGuns

3786 impressions

123 views

 I just found a couple of boxes of old .350 caliber round balls that I used to shoot in my .36 cal. TC SENECA (which I haven't owned for the last 45 years) . One is an original box of 100 Hornady factory swaged balls and the other is a box of 125 cast pure lead round balls ( also .350 but with a sprue )......not sure which mold was used, as I sold it with the Seneca. I thought to list them for a couple of weeks, before I throw them into my melting pot and turn them int 50-70s  , in case someone wanted to buy ready cast balls. I am willing to ship at buyer’s expense or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.  

categories:Sporting GoodsGuns

3226 impressions

112 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

22116 impressions

1106 views

GAMO VARMINT FEATURES with NEW BSA AIR 3-9 X 40 AO SCOPE (Retail $100) Only used once 495 FPS AIR 3- 9x 40 AO SCOPE (see below) All weather molded synthetic stock with non-slip texturing on the pistol grip and forearm Monte Carlo cheek pad aligns your eye with the scope sight Rubber recoil pad keeps the butt stock firmly planted on the shoulder Trigger: Second stage adjustable / 3.74 lb trigger pull Cocking Effort: 30 lb Overall Length: 43” (109.22 cm) Barrel Length: 17.8” Weight: 7.15 lb (3.24 kg) Manual safety Automatic cocking safety system Brand New BSA AIR 3-9x, 40mm adjustable objective, replaced the original plastic OEM scope The new BSA OPTICS OUTLOOK series air rifle scopes were specifically designed to withstand the reverse recoil found in the most powerful air rifles. Feature rich, this series offers fully multi-coated lenses, fast focus, an adjustable objective, low profile zero-reset turrets, and a Mil-Dot reticle. This series comes standard with 2 piece dovetail rings. Matte black finish. Waterproof, Shockproof and Fogproof.

categories:Sporting GoodsGuns

3862 impressions

170 views

ERGO Full Cover Rail Covers set of 3. They clip directly onto Picatinny rails for full rail protection Molded in Santoprene

categories:Sporting GoodsGuns

10024 impressions

1110 views

ERGO Full rifle Cover Rail Covers set of 3. They clip directly onto Picatinny rails for full rail protection Molded in Santoprene Please email only.

categories:Sporting GoodsGuns

2822 impressions

505 views

-Model 6088, sells for $449 on Amazon.ca -portable handle design . Beautiful and Functional Injection Molded. Durable use with the solide construction. -Customized Fit Foam -Inside:According to your size of valueds size, configure the interior foam to fit and keep from the shocks and bumps on the road. -50/50 lid-to-base ratio for easy loading and 4 portable Smooth Rolling Polyurethane Wheels:Portable Rolling Wheels provides smooth mobility.Ensure a quiet and effortless trip over a multitude of terrains and conditions. Easy To Open with Latches Design:Smarter and easier to open than traditional cases. Start the release and offers plenty of leverage to open with a light pull in just seconds. -High Performance -Waterproof:Keep your valuables dry with its high performance of watertight. Whether you're caught in rain or our at sea. -Outside Dimension: Length 44.88inches Width 25.31 inches Height 16.5inch.Inside Dimension:42"x22"x15.1".Cover Inner Depth:7.58inch.Bottom Inner Depth:7.3inch.Weight with foam:49.00 lbs

categories:Sporting GoodsGuns

2111 impressions

674 views

Make me a reasonable offer keeping in mind that you can see it is $470+taxes new Located in Spruce Grove but may be able to meet at West Edmonton or St Albert. Full details at: https://www.boytharness.com/products/boyt-harness-company-h51-double-long-gun-case Description: Sized to Accomodate two R!fles or Sh0tguns Made in the USA - Limited Lifetime Warranty Injected Molded with 120D High Impact, Polypropylene Resin 3 Piece, Shock Absorbing Flat Foam Interior can be Custom Cut to match the Profile of Your Items TSA-Approved - 2 Padlock Compatible Locations for Maximum Security 4 Powder Coated Steel Draw Latches Eliminate Accidental Openings During Travel Dustproof / Waterproof O-ring Gasket Forms Impenetrable Barrier Against Dirt & Moisture Two Handles & Ball Bearing Wheels Provide Option to Carry or Pull Steel Hinge Pins Allow for Smooth Open & Close Operation External dimensions: 53.7” x 17.25” x 7” Internal dimensions: 51” x 15” x 6” 24.02 lbs

categories:Sporting GoodsGuns

5769 impressions

474 views

The Creedmoor’s big brother! Tikka T3 Sporter in 6.5x55. You get: $3000 - T3 Sporter rifle Heavy target barrel. Double set trigger- for target push forward to initiate a nearly imperceptible trigger pull or just pull it back at approximately 3 lbs $749.95 - MDT LSS-XL Gen2 chassis $476.95 - MDT SRS skeleton rifle stock. $146.00 - Anarchy outdoors enlarged Bolt Handle/ threaded knob. $90.00 - Leupold 20 MOA pic rail $34.95 - Hogue molded vertical pistol grip. $239.90 - 2x MDT AICS 10 round metal mags. Treats and recipes available for reloaders. This gun shoots. Period. But I’’ve got too many sitting around. My loss is your gain. Thank you.

categories:Sporting GoodsGuns

21669 impressions

1629 views

Home 0 Browse Categories Browse Locations Primary tabs View(active tab) Mark as Sold Edit Savage axis precision rifle 2000.00 Posted: Oct 27, 2023 Address: Wetaskiwin, AB, T9A CategoryFirearms RiflesClassification Non-restricted Action Bolt Condition Excellent Manufacturer Savage Caliber 6.5 Creedmoor Model Axis 2 precision Sight Vortex Diamondback 4-12x40 BDC Capacity 10 Hand Right Handed or Ambidextrous SAVAGE AXIS 2 PRECISION RIFLE 6.5 creedmoor. MDT aluminum M-LOK chassis with injection molded skin. Adjustable buttstock height and length. 2.5-6lbs adjustable AccuTrigger. 22 inch carbon steel threaded barrel with end cap. x1 detachable 10 round AICS magazine. x1 detachable 10 round MDT magazine. Overall length 42 inches, Barrel twist 1 in 8" Weight 9.85 lbs. Vortex Diamondback 4-12x40 BDC scope. Westhunter scope mount with level. Plano Huntshield 42 inch lockable hardcase. Mlok 6-9" incremental bipod. 53 rounds of Winchester 125 grain 6.5 creedmoor ammo included. All owners manuals included.

categories:Sporting GoodsGuns

11311 impressions

482 views

Brand new Shell carrier for the 12 gauge Remington 870 shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:Sporting GoodsGuns

8414 impressions

464 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2816 impressions

375 views

Brand new Description: This optic goes on the 320 M17 – 320 LDC – 320 LDC PRO – 320X5 and 320X5 Legion Designed for fast, responsive target acquisition and accuracy, the ROMEO1PRO miniature open-reflex red dot sight was engineered to withstand the punishment of harsh environments. With an upgraded emitter for superior brightness and outstanding battery life, the ROMEO1PRO is capable of mounting to any SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO reflex sight interface and mounting hole spacing using the included M4 mounting screws. – Molded glass aspheric lens with high performance coatings for superior light transmittance and zero distortion – 3 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions – TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot – New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime – MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not – Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service – Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof performance – Ruggedized protective steel shroud included for extreme durability – SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Features: Color: Black Weather Resistance: Yes Objective Lens Diameter: 30mm Magnification: 1x Lens Material: Glass Fabric/Material: Aircraft Grade Aluminum Attachment/Mount Type: Picatinny Reticle: 3 MOA Dot Gun Model: Sig Sauer Length: 1.8″ Height: 1.1″ Adjustment Type: MOA Battery Type: CR1632 Weight: 0.06 lb Included Accessories: Mounting Screws Brightness Settings: 12 Water Resistance Level: IPX-7 Illumination Color: Red Width: 1.2″ Battery Life: 20000 hours Objective Window Size: 28x18mm

categories:Guns

10230 impressions

947 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

16539 impressions

1649 views