Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:GunsSporting Goods

21102 impressions

997 views

Browning pat depose fabrique Nationale D'arms De guerre herstal Belgique. Browning A22 bottom eject takedown 22lr project gun. Missing the spring and locking collet ipart n takedown portion. Feeding tube and plunger are there, wood stock has bottom corners knocked off. Can buy new pieces/parts needed and can purchase new forgrip and stock for it also. Selling my collection to fund my upcoming collarbone reconstruction, please view my other adds! 175obo? I dont know what to ask so if im way off please inform me.. thanks for your time

categories:GunsSporting Goods

4868 impressions

611 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

117955 impressions

7538 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

52742 impressions

2289 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11648 impressions

520 views

Howdy Townpost, I have a nice old Mossberg shotgun to sell. It's been nicely cleaned up the stock refinished and the action and metal Parts slicked oiled and cleaned up this would make a nice little bird gun or clay-buster. It comes with one magazine, works like a dream and is nice and clean. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71. Here's a video I made about this gun: https://youtu.be/o54GB2PDR5I?si=FTkrCxkECVBma-S4

categories:GunsSporting Goods

12146 impressions

456 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

9890 impressions

640 views

1) Winchester Post 64 M94 - Rear Sporting Leaf Sight w/ Elevator - $170.00 2) Winchester Post 64 M94 - Elevator for Rear Sight - $50.00 3) Winchester Post 64 M94 - Front Sight Silver Beaded Insert - 80.00 4) Winchester Post 64 M94 - Front Sight Hood - $40.00 5) 6) Winchester Post 64 M94 - Finger Lever Pin Stop Screw - $40.00 7) Winchester Post 64 M94 - Link Pin Stop screw - $35.00 10) Winchester Post 64 M94 SRC Front Band Screw - 40.00 11) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 12) 6-48 Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

65614 impressions

2659 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - SOLD Bolt, Chinese Type 56, stripped - $35 Dust cover, Russian marked 1951 Tula - $50 (one available) Dust cover, Chinese unmarked - SOLD Long Recoil spring, complete - SOLD OUT Short spring - $10  (1 available) Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Gas tube handguard, black molded plastic (Tapco perhaps?) - $25 Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $20 Payment by EMT (shipped) or cash (F2F pickup)

categories:GunsSporting Goods

29489 impressions

1029 views

Brand New Non-Restricted Action: Semi Auto/ Pump Caliber: 12GA Capacity: 5 Barrel Length: 20" Ghost Ring Iron Sights Dual-Mode Capability Inertia-Driven Operating System Rough texture touchpoints Lifetime Warranty Coming with: Manual and choke tube kit. By using the receiver of an existing non-restricted shotgun we have been able to add M3 style components to achieve the same look, feel and function of the legendary M3 Super 90, but without the prohibited classification. The TAC-12 “M3 Super 90” is a dual-mode semi-automatic and pump action 12GA shotgun. It can be quickly converted from autoloading to pump by simply turning a spring loaded ring located on the end of the forearm. The M3 was developed in the 1980’s for special operations and elite law enforcement units who required a shotgun that could adapt to various tactical roles. It’s dual-mode system allows for effective operation of both standard and special purpose ammunition, (i.e. rubber, tear, flare, etc.) on the fly. The M3 was designed to operate under the most adverse conditions and boasts easy handling, accuracy and a high rate of fire. Notable adopters include the Canadian JTF2, Czech 601st Special Forces Group and French GIGN. The TAC-12 “M3 Super 90” features a 20” barrel threaded for interchangeable chokes. It has a 3” chamber and is fed by a 5-shot tubular magazine (6 shots, 2.75”). The extended magazine tube features a barrel clamp for additional durability. There is a magazine cut-off/chamber-dump button so the shooter can directly chamber a special round without having to cycle through the entire magazine. Fixed on top of the receiver are 3-dot ghost-ring sights for fast target acquisition, and tapped holes for the addition of an optional top picatinny rail. The stock is fixed polymer with non-slip grip checkering, with a rubber buttpad and a sling loop located on both sides. The pump handle is ergonomically shaped with non-slip channels for use with gloves or in wet environments. As the original, it is operated by the proven inertia system. This system delivers unmatched reliability, cleaner operation, and lightning-fast cycling in a lightweight, ultra-durable design. With fewer moving parts and minimal maintenance, it handles the toughest conditions with ease.

categories:GunsSporting Goods

5482 impressions

418 views

I have a fairly worn Lee-enfield in .303 British. I'm hoping to trade it for a Russian or Chinese SKS, or something in 6.5 (though these are far more expensive and I doubt it will happen.) All the wood is near undamaged, bit the bolt, barrel, and other metal parts are scraped and worn from use. 4 ish boxes of ammo included. Trades are preferable, but it can be purchased. For formality: PAL required on trade, even though you already owning a firearm implies one.

categories:GunsSporting Goods

18721 impressions

1077 views

This is a budget friendly fixer upper Remington Model 1858 New Army revolver chambered for .44 caliber - price OBO. This revolver would have been born around the US Civil War, and based on level of wear probably saw use in the battle field before being harvested for parts at some point. Who knows what this revolver has seen in its long and resolute time on earth. Luckily it shows promise to be revived as parts still move freely and are not bound up. All required parts are available online, such as from Dixie Gun Works who accept international orders. Based on putting a cart together total cost would be expected to be below $200 USD, probably working out to about $350 CAD all said and done after shipping. https://www.dixiegunworks.com/index/page/category/category_id/409/name/Remington+M1858+New+Model+Army+and+Navy/ These are a very sought after and collectible model. Functional, a large caliber Remington Revolver in this shape this would generally go for $2000-$3000, with the only other one currently listed at $3800. Honestly I just don't have the time or interest to wait for the parts to show up and repair. My laziness is your gain. By my judgement, this revolver has the following issues: Barrel: loosened 1/16th turn, missing front sight and loading lever catch. Gouge around circumference and a couple dents. Frame: Cylinder pin is undersized (should get a replacement), needs seating lever and trigger guard/trigger guard screw Action: Needs cylinder hand, trigger return spring, and mainspring Overall these parts all appear to be available online from several websites including Positives are that the hammer and trigger move very freely without evidence of rust, and that the cylinder stop, trigger, and hammer interface all seem correct so that with a trigger return spring, mainspring, and cylinder hand all should be able to resume action operation and lockup. Probably a new cylinder pin would be beneficial for this also. The hardwood (walnut) replacement grips are very sturdy and fit well. The rifling is still present and does not look too worn. The frame is in great shape, with an "antiqued" dark grey patina that shows no evidence of active pitting. Overall a promising revolver for repair for an opportunistic buyer to add value. Please feel free to call or message for more details, photos, or videos. Comes with FRT antique report. No PAL, 18+ Ships Canada Check my ads for more antiques! I make no claims about the safety of firing ANY antique revolver. Ask a gunsmith

categories:GunsSporting Goods

8503 impressions

647 views

For sale is my a mechanically great, all matching, 1880 production short barrel "Shopkeeper" Colt Thunderer in .41 LC. Selling because cash is tight. As an Antique, this handgun is exempt from Canadian licensing and registration requirements, and can be used anywhere a nonrestricted firearm would be legal. Black powder or light load smokeless .41 Long Colt rounds can be purchased online or worked into deal. The 1877 line of revolvers was Colt's first double action model ever produced. They made almost 170,000 from 1877 to 1909 with three main designations: the Colt "Lightning" in .38 LC, the "Thunderer" in .41 LC, and the "Rainmaker" in .32. However, due to Canada's laws, only the .41 caliber ones are designated as "antique". This is luckily one of those guns, and it needs no registration or licensing to own. These models are highly collectible handguns, particularly the short barrelled "Shopkeeper" model due to its easy to stow nature. Arizona Wild West gunslinger Doc Holiday carried one of these. This particular example, SN 22261, was produced rather early in 1880 and has a short but accurate 3.5" barrel. All parts match, and the exterior retains an excellent 85% of the original nickel. The internal mechanics are incredibly clean and original. The bore is fair with strong defined rifling. Grips are nice like-new repros with rampaging Colt medallions. All hammer clicks are present, lockup is rock solid, and the trigger pull is pleasant in both SA and DA. The barrel is stamped with the Hartford Connecticut Colt address and the acid etched "COLT D.A. 41" is still visible. The left side of the frame displays the 3 line 1871, 1874, and 1875 patents. It reads "41 CAL" on the trigger guard. Can work ammo into deal with PAL No PAL required for revolver Must be 18 Comes with FRT page Ships within Canada Check out my profile for more antique handguns! I make no claims about the safety of firing ANY Antique firearm. Consult with a gunsmith first.

categories:GunsSporting Goods

14610 impressions

1005 views

Need some Sks parts.. the piston rod spring and piston rod and a goood gas tube and a good arctic birch stock.

categories:GunsSporting Goods

10244 impressions

183 views

Mossberg maverick with ambidextrous 10 round drum magazine, discontinued I’ve used it once and it has just sat in the safe, second is the Canuck operator Benelli m4 clone, fully Interchangeable with m4 parts about 50 shells through it runs flawlessly. Will come with magpul padded sling Looking for offers 587 983 7539

categories:GunsSporting Goods

16307 impressions

1706 views

I have a Russian SKS manufactured at Tula in 1953. These are seriously fun guns which are worth your bang for your buck (no pun intended). I had purchased it from Cabela's back in 2015 and only used non corrosive ammo. It's been stored correctly away from moisture and well lubricated. Its in great shape and doesn't have any rattle or loose parts. Asking $800 Shipping not included. Pick up in Calgary.

categories:GunsSporting Goods

18961 impressions

1385 views

I don’t get out enough anymore to justify holding on to this beauty. The package includes: Brugger and Thomet B&T TP9-N in OD Trijicon MRO-C 2 MOA Red Dot (with low, currently installed, and 1/3 co-witness riser)* Qty 5 x 5/30 Mags Qty 2 x 5/15 Mags B&T Mag loader Original cleaning kit Extensive parts kit (and Qty 1 x 5/15 broken mag for parts) Original Sling (I never used) Plano Gun Guard All-Weather case Original instructions manual Original B&T TP9 case (I never used) Original Trijicon MRO case* Asking $5200 with the optic $4700 without including shipping** obo It may sound like a lot but add up the costs of this package and the scarcity of TP9s and in OD and I think it is actually a pretty reasonable place to start the conversation. I am not in a hurry to sell so I wont respond to low-ball offers. Please let me know if you have any questions. *let me know if you don’t want it this it the only item I would not sell as part of the package. **Will include shipping and insurance up to a maximum of $200 (that is ~$137.5 in insurance for Canada Post maximum of $5000) Pictures https://imgur.com/RkL1D29 https://imgur.com/n32okNY https://imgur.com/aR8eh1u https://imgur.com/Hz1BYf9 https://i.imgur.com/CYMhhcr https://imgur.com/496Sb3F https://imgur.com/uHfno6M https://imgur.com/Nw7wpxa https://imgur.com/ordyJpR https://imgur.com/7yhSvjv https://imgur.com/1ulzLIZ https://imgur.com/gfPgv2v https://imgur.com/1TVH3MT

categories:GunsSporting Goods

2905 impressions

290 views

Bsa enfield m1917 30-06 barrel and receiver with everything except the bolt, bore is in good shape and shot amazing until the bolt got tossed by an ex girlfriend. Hard to find these in alberta but I don't have the time to search for a bolt for it so it's a parts gun. Can include the stock and trigger guard for the right price Cash offers or trade for a functional 303 British.

categories:GunsSporting Goods

11383 impressions

854 views

Unused Lee Enfield No. 1 Mk.3 Buttstock previously purchased from Prestigious Woodstocks - was part of my projects pile but never used. I have utilized several of these buttstocks with great success on several build projects, and can attest to their excellent quality, however I simply have too many bits! Wood buttstock only, no metal components. Can ship nationally, open to discounting for local pickup. Description from their website: Solid walnut Buttstock, used for restoration for original stocks, these parts require minimal fit up and final sanding, shipped in raw wood with no finish to allow you to do full raw fit up and the finish sand and seal. Typical finishes used are boiled linseed oil or tung oil. For your safety, we Highly recommend the fit up being done by a professional gun smith."

categories:GunsSporting Goods

4246 impressions

189 views

Parts Only Canada is your source for quality gun parts and accessories in Canada. We offer aggressive pricing on our products; you are unlikely to find a better deal! All orders above $250 (before taxes) ship free! www.partsonly.ca Customer satisfaction is our top priority. We go the extra kilometer to offer quality made gun parts, reliable shipping, and prompt service; earning the loyalty of gun enthusiasts across Canada. Our product lines are primarily aimed at sport/target shooters. Most of the items we sell are USA made. Some of the brands we offer include: Magpul, ATI, ProTech/Archangel, Bravo Company Manufacturing, Uncle Mikes, MDX, OEM Ruger, OEM Glock, PSA and similar. We support platforms like the Mossberg 500, Ruger 10/22, SKS, Glock, etc. If you have a request for a specific part that isn't on our website, please send us an email at info@partsonly.ca with details including a product code or part number. We'll see what we can do to get what you need! We receive our shipments about every 6 weeks and are happy to add your parts to our order. You must be age 18+ to order from partsonly.ca. You must read all terms and conditions of use before placing an order through our website. Applicable tax applies on all orders. www.partsonly.ca

categories:Guns

36412 impressions

3326 views

This is NEW! It was taken out of original packaging at time of purchase and afterwards put away. *Create your own holster, fits up to 5 inch barrels *This package contains pre-cut leather parts, hardware, waxed thread, needles, patterns and instructions (what you see is what you get) *Made in the United States Everything that originally shipped with the kit is included / NEW Cash Only. No Shipping. No Trades.

categories:GunsSporting Goods

4669 impressions

496 views