**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a used very good condition Remington 870 12ga, 3” Shotgun that comes with a 28” Field Vent Rib Barrel, and shotgun chokes. (**SOLD - 23” Cantilever Rifled Barrel/Scope has been SOLD, and is no longer available).   **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. Holds only with deposit. Delivery Negotiable.  Buyer pays for shipping costs and makes arrangements for payment.

categories:GunsSporting Goods

15485 impressions

1040 views

Hard to find especially in such excellent condition, bluing 99.9%, stock has a few surface minor dings but no cracks. Rifling clean bright and vivid. Drilled and tapped. 24 inch barrel, appears all original. Top feed. serial number 40425X, with "30" stamped in Left side nearest receiver. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

65003 impressions

2188 views

Remington Model 580 Single Shot Smooth Bore (1967) - 22 Rimfire Shot Shell, 24" Barrel, Bolt Action, Original Bead Sight. Model 580 Single Shot Rifles had a total production of 60,0000 Rifles (1967 - 1977) - Only 3000 were made as Smooth Bore. $950.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

10916 impressions

349 views

Remington Model Seven CDL 7mm-08.  20 inch barrel. Original box. Pal is a must and will be verified. No trades, thanks. Price is firm. Shipping is only available on buyers expense.  Serious inquires only please.  I will not respond to townpost messager.

categories:GunsSporting Goods

15027 impressions

878 views

Collector/Shooter .410 Winchester Made Shot gun ,Extreamly Low Ser # , No Handling Marks Minty . - Pre 64 .410 made by Winchester Limited , First Run Made Extreamly Low 2 Diget ser # Wow , m-84 . - Receiver Color Cased , some , Scroll Leaf Work on Receiver , Auto Eject , Tight Action , 26'' Barrel . - Custom Walnut , Gloss Finished Oil , Very Handsome , You Wont Get Another Chance Like This , SQ . - Guns with low ser # or double diget ser # or single ser # s double or Quadruple in price look it up . - This gun was accessed twice @ 1500.00$ So make your best offer and see how it goes cash obo/trade - Trade For Specific Rifle ! Nice Deer/.22 LR Rifle Walnut Stocked ! in .243 win , 30-30 win , .308 Win ! - Interest's in Remington m-700 or Winchester m- 70 or Savage CDL m-110 or Similar Rifle ! - Henry lever/Single Shot or Marlin m-336 or Winchester m-94 in 30-30 win . - Trade For Nice .22 LR/.22 magnum in walnut stock & like new condition . - Henry .22 magnum or Rugger .22 Lr/.22 mag , .22 Lr CZ .22 Browning Bl or .22 Lr Tika or Savage BRJ . - Rifles must be a Sporter model , No Plastic , No Military/Tactical Styled Rifles ! - ---------------------------------Try your trade offer Today ! --------------------------- - Text is Best to start conversation or Call Evenings Local in Person Exchange Only ! 780-908-8424 Thanks .

categories:GunsSporting Goods

74917 impressions

2557 views

Brand new Optics Ready Includes Two Magazines, Speed Loader and Range Bag Fits Glock 17 17L 22 31 34 35 37 GEN 4 Features Fixed Sights Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:GunsSporting Goods

11565 impressions

542 views

If this ad is up, then item is still available! Remington 14 1/2 (or 141) pump action 44 WCF (44-40 Win) for sale. Barrel Stamped with DCP (WWI BRITISH DOMINION OF CANADA PROOF). $1400 EMT(shipping) or cash(F2F pickup) Shipped via Canada Post at buyers expense within Canada only

categories:GunsSporting Goods

4641 impressions

301 views

Ever think about trying a wildcat cartridge? I have 20 Extreme dies available as well as the reamer. Wth is a 20 Extreme? It is a fast, accurate, fun shooting little 20 caliber cartridge based off the 222 Remington case that is easy on the shoulder and barrel, cheap to load for too. It was designed by my late friend and fellow gun enthusiast. No fire forming required, run the case thru the dies, trim, load and shoot. These days when components are so expensive it's nice to be able to go to the range and shoot more than a couple rounds and actually have some fun. One load I have uses only 18.6 grains of powder, that's somewhere around 375 loads to a pound of powder! Great for gopher, coyotes, fox and other small game or just target shooting for fun. These are brand new still sealed from factory

categories:GunsSporting Goods

13448 impressions

801 views

Rifle price $4500. Scope and rings price $2700. Custom Remington 700 made by ATRS. Nothing is stock. Shoots 1/4" groups at 100 yards with handloads. Always stored in a case and used to shoot long range. Took it out to 1240 and can hit milk jugs every time. Just selling as I don't get out as much as I used to. Paid over $7000 new. Only 300 rounds through it. Scope is a Vortex Razor Gen 2 3-18x50 in Mils. Has Vortex scope caps, Warne Professional rings and bubble level. Rifle Specs - Accurized action. 22" Lilja Barrel. Trigger Tech Diamond Trigger. McMillan A5 Stock with fully adjustable rear.

categories:GunsSporting Goods

25770 impressions

1469 views

This is a budget friendly fixer upper Remington Model 1858 New Army revolver chambered for .44 caliber - price OBO. This revolver would have been born around the US Civil War, and based on level of wear probably saw use in the battle field before being harvested for parts at some point. Who knows what this revolver has seen in its long and resolute time on earth. Luckily it shows promise to be revived as parts still move freely and are not bound up. All required parts are available online, such as from Dixie Gun Works who accept international orders. Based on putting a cart together total cost would be expected to be below $200 USD, probably working out to about $350 CAD all said and done after shipping. https://www.dixiegunworks.com/index/page/category/category_id/409/name/Remington+M1858+New+Model+Army+and+Navy/ These are a very sought after and collectible model. Functional, a large caliber Remington Revolver in this shape this would generally go for $2000-$3000, with the only other one currently listed at $3800. Honestly I just don't have the time or interest to wait for the parts to show up and repair. My laziness is your gain. By my judgement, this revolver has the following issues: Barrel: loosened 1/16th turn, missing front sight and loading lever catch. Gouge around circumference and a couple dents. Frame: Cylinder pin is undersized (should get a replacement), needs seating lever and trigger guard/trigger guard screw Action: Needs cylinder hand, trigger return spring, and mainspring Overall these parts all appear to be available online from several websites including Positives are that the hammer and trigger move very freely without evidence of rust, and that the cylinder stop, trigger, and hammer interface all seem correct so that with a trigger return spring, mainspring, and cylinder hand all should be able to resume action operation and lockup. Probably a new cylinder pin would be beneficial for this also. The hardwood (walnut) replacement grips are very sturdy and fit well. The rifling is still present and does not look too worn. The frame is in great shape, with an "antiqued" dark grey patina that shows no evidence of active pitting. Overall a promising revolver for repair for an opportunistic buyer to add value. Please feel free to call or message for more details, photos, or videos. Comes with FRT antique report. No PAL, 18+ Ships Canada Check my ads for more antiques! I make no claims about the safety of firing ANY antique revolver. Ask a gunsmith

categories:GunsSporting Goods

9420 impressions

708 views

Please text only. -180 rounds down tube -Remington 700-stainless action -Lilja 26 inch barrel -5 round magazine -Timney trigger -MDT LSS chassis -Partial trade for low power leupold VXR or lever action rifle

categories:GunsSporting Goods

8809 impressions

806 views

This is a Rare Antique Remington Early Production Type I, A.K.A. The Double Derringer. Remington produced around 150000 model 95’s between 1866 and 1935. There were only around 1600 produced before the addition of an extractor. Making this one the hardest to find for collectors. This type is marked “E.Remington & Sons, Ilion, N.Y.” on one side of the barrel rib and “Elliot’s Patent Dec. 12, 1865” on the other. Later models would see the addition of an extractor and the barrel address moved to the top rib. This has a 3” barrel, is chambered in .41 rimfire and has a spur trigger. There are a a few light handling dings and almost no original finish left. The grips are in fine condition. Mechanically it is still very strong with the action working and cycling as it should. The hinges are intact. There is a slight play in the lock up which would be a fraction of a millimeter. These were carried by many people in the Wild West as they were easily concealed. Wild Bill Hickok is said to have carried a pair of these at times. This would make a great addition to a Remington collection and could be the centre piece to any collection. this is an antique so no PAL is required for purchase. Buyer must be 18 and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected prior to any form of use. Short term layaway options are available.

categories:GunsSporting Goods

31556 impressions

1794 views

*Sold* Parting with my Colt 1878 revolver. She's single and double action, chambered in .476 Eley which is interchangeable with .455 Webley. These revolvers were most commonly chambered in .44-40 Winchester and dubbed the "Frontier Model", with the .476 chambering being very scarce. They were introduced in 1878 as a larger frame, larger caliber twist on the new Colt 1877 Thunderer/Lightning model, filling a niche most similar to the 1873 Single Action Army, but this time in double action as well. Selling to clear up some moolah for car repairs. Pre-1898 Canada legal antique. This revolver was made in 1885. It has the desirable Pall Mall one line address on the barrel reading "COLT’S PT.F.A. MFG. CO. HARTFORD CT. U.S.A. DEPOT 14. PALL MALL LONDON" with most words still visible. This address is a rarity and was only put on guns intended for the European markets. Serials match 15xxx, with the last 3 digits stamped on the cylinder. The loading gate is a replacement. This gorgeous revolver has an extremely nice black finish with shiny nickeled highlights on the hammer, trigger, and hammer screw. The visual condition speaks for itself. A stunning piece sure to catch eyes, and assurance that the metal will remain protected. The rifling is still strong and defined, showing some scattered frosting. The grips appear original, and are sturdy with minor holster wear on the high points from time on the hip. The action is great. The internals are shiny in factory condition. The cylinder locks up airtight at firing position. I have never seen an 1878 or 1877 with tighter lockup. In the unique fashion of the 1878 model design, this revolver has no cylinder stop allowing slight backrotation when you disengage the action, but it still generally cycles. The loading gate is a bit wobbly, contributing to backrotation. You can read more here: https://www.americanrifleman.org/content/colt-1878-revolver/ A beautiful collector piece and functional revolver. Don't be a stranger, feel free to call or text if you have any questions. Comes with .455 Webley ammo for $125 if you have PAL. Check my ads for more antiques Ships Canada, 18+, no PAL required Comes with FRT antique report I make no claims about the safety of shooting ANY antique. Check with a gunsmith! Tags: .22, .32, .38, .41, .44, .450, .45, RF, CF, Boxer, Kynoch, ACP, auto, Colt, Smith & Wesson, Remington, Webley, British, America, Canada, Tranter, SAA, Single Action Army, WG, Target, Frontier

categories:GunsSporting Goods

41204 impressions

3172 views

Viper PST 5-25x50 with shade and covers $1200 at Cabela’s that’s when they are on sale normally $1600 Vortex scope mount $240 Timney trigger $200 Range buddy ready muzzle break $100 4 mags $100 Remington 700 heavy barrel $800 Cadex Defence, Field Tactical Chassis$1669 BT46-LW17 PSR ATLAS BIPOD: STANDARD HEIGHT WITH ADM-170-S LEVER $400 Well Over $4600 into this gun comes with case that’s another $100 I think $2800 is fair let me know what you think. Selling as a package only

categories:GunsSporting Goods

13407 impressions

1220 views

show room condition Remington 1100 G5, only been used once to make sure it eject the empties \ 20 gauge 28" barrel, comes with hard case with 5 chokes

categories:GunsSporting Goods

8054 impressions

707 views

18 rounds through this gun getting sighted in only. Caldwell tactical bipod. Vortex Viper 6.5-20X50 lifetime warranty scope. KRG Bravo Chassis. Muzzle break. Beautiful gun built Irish gunsmith well known. Comes with 41 rounds of ammunition. 10 round clip. Pelican vault gun case.

categories:GunsSporting Goods

14616 impressions

971 views

Pristine shape model 1100 semi auto 12 gauge also comes with rifled slug barrel serious inquires only please

categories:GunsSporting Goods

17240 impressions

1807 views

700 Rem 308 Heavy Barrel 24” BDL 1978 Production Has 27 rds through it Only difference in appearance to new is, there is no original box As mint as a rifle that has never been in the field and only taken to the range to zero Then only taken out every few years to verify the zero, cleaned and put away I really hate the idea of parting with this, its from the era when the people at Remington were Craftsmen and gave a shit Comes with New Leather sling as seen Leupold Fixed 12x with Target Knobs Front AO and Mildot Reticle Scope has a little kiss mark just behind the AO ring from a previous install on another rifle a long long time ago Has Leupold PRW rings Leupold 2 pc bases Selling as a complete unit, will not split it up This is all the Pics If your really interested you’ll come see it Local Sale Only, High River Area just South of Calgary I may travel part way to me someone who is driving here Anybody that appreciates real quality craftsmanship will love this Rifle You can find these is 223 and 243 but they’ve been hunted They Just aren't around un-Hunted in this condition in 308 If its gonna go I want $3500. for it, or it can sit in the safe for another 44 years or until I die which ever comes first Thanks Brad

categories:GunsSporting Goods

22806 impressions

1966 views

Remington 700 LTR (Light Tactical Rifle), chambered for .308 Win, it features a slimmed down HS Precision stock to improve portability and reduce weight. The stock incorporates a with full length aircraft aluminum bedding block stock that is Kevlar and fiberglass reinforced so it stays dimensionally stable under the worst of adverse conditions, hex-head Allen screws to secure the barreled action, and make the barrel free floating. It also has an extra sling stud at the front to mount a bipod like the Harris Bipod. The flutes in the 20″ LTR barrel not only assist in weight reduction and heat dissipation, but are engineered to enhance barrel rigidity for pinpoint accuracy and is finished with a crowned muzzle. It comes with Timney trigger make this rifle extremely accurate and also comes with Leupold Mark IV 20 MOA Picatinny Rail. The LTR was designed as a lighter weight, compact tactical rifle for urban situations but I find it perfect hunting rifle for its precision, compact and lightweight. I only fired it to break in the barrel and sight-in in the range and have it ready for hunting, around 150 rounds give or take. It’s .5 MOA groups guaranteed at 100 yards with 168 gr. match grade rounds. Will ship anywhere in Canada at buyers expense, also available for pick up and delivery in Edmonton, Alberta

categories:GunsSporting Goods

8206 impressions

1073 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

12781 impressions

1123 views

11-87 12 gauge camo 3 inch. Please read the full ad before contacting me. This is a bit of a project gun. I bought it new in 2008 and shot it casually over the years with almost nothing but lead trap loads. Recently it developed a problem cycling the action after the shot. It will always fire. However, sometimes it will cycle the action, other times the action cycles half way and stops, and still other times it will not cycle at all. Sometimes it picks up a new shell and sometimes it won't. Sometimes is locks up and can only be freed by popping the barrel and the action bars out and re assembling it. I don't have the time or interest to look into it . It might be a simple fix who knows. I already bought a gun to replace it. This isI a package deal only. This includes the gun as it came from the factory, with 1 modified choke tube, a wrench, 27(?) Inch barrel. It will also come with a Remington 20 inch fully rifled 12 gauge barrel that has open sights. This barrel has 11 slugs through it and was used on 1 trip to shoot a moose. I will ship this gun on the buyers dime but I would much prefer a local sale so that the buyer can actually see the problems themselves. Text Jeff at 403 390 2570 for the fastest response. Located in Airdrie

categories:GunsSporting Goods

5486 impressions

727 views